TITLE

Microstructures and Properties for a Superalloy Powder Mixture Process by Electron Beam Melting

AUTHOR(S)
Hernandez, J.; Murr, L. E.; Amato, K. N.; Martinez, E.; Shindo, P. W.; Terrazas, C. A.; Rodriguez, E.; Medina, F.; Wicker, R. B.; Li, S. J.; Cheng, X. Y.; Yang, F.
PUB. DATE
July 2012
SOURCE
Journal of Materials Science Research;Jul2012, Vol. 1 Issue 3, p124
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The microstructure and residual hardness for solid components of 2-phase TiAl (Ti-48Al-2Nb-2Cr in a/o) and Inconel 625 (Ni-22Cr-6Mo-2Nb in a/o) fabricated by electron beam melting (EBM) were compared with a 10:1 blend of TiAl: alloy 625 pre-alloyed powders producing a complex alloy having the composition 44Ti-39Al-7Ni-4Nb-4Cr-2Mo(in a/0) The blended alloy hardness (MV) reached 7.5 GPa in contrast to 1.4 GPa for the Alloy 625 and 4.0 for the 2-phase TiAl alloy. Reticulated mesh samples and stochastic foam samples prepared from the blended alloy by EBM exhibited a relative stiffness versus relative density plotted on a log-log basis consistent with., other reference alloys fitted to a straight line with a slope n = 2 for ideal open cellular materials.
ACCESSION #
84516186

 

Related Articles

  • Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting. Murr, L.; Martinez, E.; Gaytan, S.; Ramirez, D.; Machado, B.; Shindo, P.; Martinez, J.; Medina, F.; Wooten, J.; Ciscel, D.; Ackelid, U.; Wicker, R. // Metallurgical & Materials Transactions. Part A;Nov2011, Vol. 42 Issue 11, p3491 

    Microstructures and a microstructural, columnar architecture as well as mechanical behavior of as-fabricated and processed INCONEL alloy 625 components produced by additive manufacturing using electron beam melting (EBM) of prealloyed precursor powder are examined in this study. As-fabricated...

  • Inter-Relationships between Composition, γ' Morphology, Hardness, and γ-γ' Mismatch in Advanced Polycrystalline Nickel-Base Superalloys during Aging at 800 °C. Mitchell, R. J.; Preuss, M. // Metallurgical & Materials Transactions. Part A;Mar2007, Vol. 38 Issue 3, p615 

    In this article, two established nickel-based superalloys, Udimet 720 and RR1000, and a further experimental alloy, UC01, were studied in terms of their response to aging at 800 °C. The alloys were subject to a solution treatment above their γ' solvus temperature to dissolve all γ'...

  • SANS examination of precipitate microstructure in the creep-exposed single-crystal Ni-base superalloy SC16. Strunz, P.; Schumacher, G.; Chen, W.; Mukherji, D.; Gilles, R.; Wiedenmann, A. // Applied Physics A: Materials Science & Processing;Dec2002 Supplement, Vol. 74 Issue 6, ps1083 

    The evolution of γ'-precipitate morphology in the creep-exposed, single-crystal, Ni-base superalloy SC16 was studied by small-angle neutron scattering (SANS). The scattering curves observed show that the originally cuboidal precipitates become more rounded in the initial period. On further...

  • Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting. Murr, Lawrence; Shujun Li; Yuxing Tian; Amato, Krista; Martinez, Edwin; Medina, Frank // Materials (1996-1944);Apr2011, Vol. 4 Issue 4, p782 

    Reticulated mesh samples of Co-29Cr-6Mo alloy and Ni-21Cr-9Mo-4Nb alloy (625) and stochastic foam samples of Co-29Cr-6Mo alloy fabricated by electron beam melting were characterized by optical metallography, and the dynamic stiffness (Young's modulus) was measured by resonant frequency analysis....

  • III-V Nitride based piezoresistive microcantilever for sensing applications. Qazi, Muhammad; DeRoller, Nicholas; Talukdar, Abdul; Koley, Goutam // Applied Physics Letters;11/7/2011, Vol. 99 Issue 19, p193508 

    III-V Nitride based microcantilevers, with AlGaN/GaN heterostructure field effect transistor as the piezoresistive deflection transducer, have been investigated under steady state, transient, ac, and UV illuminated conditions and compared to theoretical calculations. The steady state transverse...

  • Template-free synthesis of helical hexagonal microtubes of indium nitride. Shudong Luo; Weiya Zhou; Wenxin Wang; Zengxing Zhang; Lifeng Liu; Xinyuan Dou; Jianxiong Wang; Xiaowei Zhao; Dongfang Liu; Yan Gao; Li Song; Yanjuan Xiang; Jianjun Zhou; Sishen Xie // Applied Physics Letters;8/8/2005, Vol. 87 Issue 6, p063109 

    Single crystalline indium nitride (InN) helical microtubes with a hexagonal hollow cross section have been synthesized in bulk quantities by nitriding indium oxide powder in ammonia flux. As-prepared InN microtubes grow along the [0001] direction with typical outer diameters of 1–3 μm,...

  • Coupling Inward Diffusion and Precipitation Kinetics; the Case of Nitriding Iron-Based Alloys. Jung, Minsu; Meka, Sai; Rheingans, Bastian; Mittemeijer, Eric // Metallurgical & Materials Transactions. Part A;Mar2016, Vol. 47 Issue 3, p1425 

    A model that describes the inward diffusion of an element I into a solid substrate and the simultaneous precipitation of a compound MI, with M as the alloying element initially dissolved in the substrate matrix, is presented for the case of nitriding iron-based alloys. The model was developed by...

  • Microstructural changes in long-time thermally exposed Ni-base superalloy studied by SANS. Zrník, J.; Strunz, P.; Horňák, P.; Vrchovinský, V.; Wiedenmann, A. // Applied Physics A: Materials Science & Processing;Dec2002 Supplement, Vol. 74 Issue 6, ps1155 

    The SANS experiment was a crucial part of a broader investigation of the long-time structural stability of the polycrystalline Ni-base superalloy and its effect on the subsequent creep characteristics. The results of the creep tests have shown that a long isothermal exposure at temperatures of...

  • W.C. Heraeus GmbH and its activities regarding large grain Niobium Discs. Spaniol, Bernd // AIP Conference Proceedings;8/9/2007, Vol. 927 Issue 1, p179 

    W.C. Heraeus is one of the leading companies in the field of precious and refractory metals. The refractory metals activities have been started in 1940. W.C. Heraeus is one of the qualified suppliers for high pure Niobium for the use in high-frequency-super-conducting cavities. The latest...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics