Tomašić, Tomislav; Demetlika, Andrea; Crneković, Mladen
July 2012
Transactions of FAMENA;2012, Vol. 36 Issue 3, p23
Academic Journal
In this project a remote controlled self-balancing mobile robot was designed, built and controlled. This paper gives a summary of the work done in the fields of mechanical design, electronics, software design, system characterization and control theory. This wide array of fields necessary for the realization of the project holds the project up as a leading example in the field of mechatronics. In the paper special focus will be on the modelling of the robotic system and the simulation results of various control methods required for the stabilization of the system.


Related Articles

  • Research on Control System of Rotary Inverted Pendulum Based on ARM. Jia LIU // Applied Mechanics & Materials;2014, Issue 684, p381 

    In this paper, control system of rotary inverted pendulum based on ARM is designed, which is composed by mechanical section and control section. The system measures signal for variation of angle of radial arm and pendulum rod and transmits such signal to ARM control panel, after which control...

  • DISEÑO DE CONTROLADORES BASADOS EN TÉCNICAS DE CONTROL ÓPTIMO LQR+i Y H2 PARA UN PROTOTIPO DEL PÉNDULO INVERTIDO SOBRE RUEDAS. Ramos, Camilo Andrés Ávila; Cardenas, Fredy Alexander Suarez // Revista Politécnica;jul-dic2012, Vol. 8 Issue 15, p45 

    This paper presents the design of two controllers that manage simultaneously to balance the system called inverted pendulum on wheels, the H2 controller based on LMIs and the controller LQR+i. A control law designed in Matlab is programmed with the objective of achieving a response that...

  • Stabilization of Rotary Inverted Pendulum Using Fuzzy Logic. Khashayar, Arman; Nekoui, Mohammad Ali; Ahangar-Asr, Hamed // International Journal of Intelligent Information Processing;Dec2011, Vol. 2 Issue 4, p23 

    The Rotary Inverted Pendulum (RIP) has sufficient suitable characteristics from control point of view to be famous for one of the best systems for evaluating control strategies and controllability tests. Having multivariable nonlinear unstable non minimum phase dynamics for a simple system puts...

  • Control of a 2-DOF omnidirectional mobile inverted pendulum. Viet, Tuan; Doan, Phuc; Giang, Hoang; Kim, Hak; Kim, Sang // Journal of Mechanical Science & Technology;Sep2012, Vol. 26 Issue 9, p2921 

    In this paper, stabilization of a 2-degrees-of-freedom (2-DOF) omnidirectional mobile inverted pendulum (OM-IP) is studied. The OM-IP consists of the rod that rotates around a rotary point of a universal joint which is connected at the center of the omnidirectional mobile platform (OMP). For...

  • Height control for a two-mass hopping robot based on stable limit cycle. Taihui Zhang; Honglei An; Qing Wei; Wenqi Hou; Hongxu Ma // International Journal of Advanced Robotic Systems;Nov/Dec2016, Vol. 13 Issue 6, p1 

    Differing from the commonly used spring loaded inverted pendulum model, this paper makes use of a two-mass spring model considering impact between the foot and ground which is closer to the real hopping robot. The height of upper mass which includes the upper leg and body is the main control...

  • Design of Adaptive PID Controller Based on Maximum Modulus Theorem for Inverted Pendulum on a Cart. George, Jim; Krishna, Bipin; George, V. I.; Kumar Menon, Mukund // Sensors & Transducers (1726-5479);Oct2012, Vol. 145 Issue 10, p163 

    Stabilization of a pendulum in inverted position when the base is moving is one of the challenging tasks in aircraft, automobile and ship industries. So in this paper the system under consideration is inverted pendulum on a cart which has single degree of freedom (angular rotation of pendulum)....

  • A Study on Using Multiple Sets of Particle Filters to Control an Inverted Pendulum. Midori Saito; Ichiro Kobayashi // Proceedings of the World Congress on Engineering & Computer Scie;2013, p1 

    The dynamic system is controlled by various approaches by means of the equation of motion which approximates its motion characteristics with a linear function. There is however much noise in the real control environment. So, we often encounter the situation in which we cannot completely...

  • An improved backstepping design for the control of an underactuated inverted pendulum. Lu, Yu-Sheng; Chiu, Hua-Hsu; Lien, Shu-Fen // Journal of Mechanical Science & Technology;Mar2013, Vol. 27 Issue 3, p865 

    This paper presents an improved backstepping design (IBD) for the control of a new type of underactuated inverted pendulum. The characteristics and possible applications of the inverted pendulum are presented. Nonlinear models and a linearized model are given for a straightforward explanation of...

  • Modeling and control of an unstable system using probabilistic fuzzy inference system. SOZHAMADEVI, N.; SATHIYAMOORTHY, S. // Archives of Control Sciences;2015, Vol. 25 Issue 3, p377 

    A new type Fuzzy Inference System is proposed, a Probabilistic Fuzzy Inference system which model and minimizes the effects of statistical uncertainties. The blend of two different concepts, degree of truth and probability of truth in a unique framework leads to this new concept. This...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics