Synthesis of nanosized powders and coatings of calcium phosphates

Medkov, M.; Grishchenko, D.; Steblevskaya, N.; Malyshev, I.; Rudnev, V.; Kudryavyi, V.
September 2012
Theoretical Foundations of Chemical Engineering;Sep2012, Vol. 46 Issue 5, p541
Academic Journal
Hydroxyapatite powders with a particle size of nearly 100 nm, i.e., rather close to bone crystals shaped as 60 × 20 × 5-nm flattened prisms, were synthesized by the pyrolysis of a solution of calcium oleate in tributylphosphate. The possibility of synthesizing hydroxyapatite coatings on different ceramic materials was demonstrated. The pyrolysis of a solution of strontium oleate in tributylphosphate was established to produce the Sr10(PO)(OH) compound isotypical to hydroxyapatite, which in turn creates prospects for synthesizing materials based on hydroxyapatite with some calcium atoms substituted by strontium.


Related Articles

  • Effect of mechanical activation on the morphology and structure of hydroxyapatite. Trakhtenberg, I.; Rubshtein, A.; Volkova, E.; Petrova, S.; Fishman, A.; Zakharov, R.; Vykhodets, V.; Kurennykh, T. // Inorganic Materials;Jan2011, Vol. 47 Issue 1, p45 

    We have studied the effect of grinding in planetary mills on the phase composition, morphology, and water content of hydroxyapatite powder. The results indicate that milling for even relatively short times, which reduces the average particle size by a factor of 2, causes the monetite present in...

  • Study on calcination of Nano-Crystalline Hydroxy-Apatite synthesised from Kitchen Waste (used Egg shells). Adak, M. Dasgupta; Chattopadhyay, A. K.; Purohit, K. M. // Journal of Pharmacy Research;Mar2011, Vol. 4 Issue 3, p912 

    Four different temperatures (700-1000 °C) were chosen for calcination treatment of as-received hydroxyapatite powder before press forming and sintering to study the effect of calcination on the sintering behaviours. The results show that calcination treatment increases the average particle...

  • Calcium phosphate coatings deposited by laser ablation at 355 nm under different substrate temperatures and water vapour pressures. Fernández-Pradas, J.M.; Clèries, L.; Martínez, E.; Sardin, G.; Esteve, J.; Morenza, J.L. // Applied Physics A: Materials Science & Processing;2000, Vol. 71 Issue 1, p37 

    Abstract. Calcium phosphate coatings were deposited on Ti6Al-4V by laser ablation with a 355 nm Nd:YAG laser at different substrate temperatures. Two series of coatings were deposited at water vapour pressures of 10 and 45 Pa by varying the substrate temperature from 20 to 600 Celsius....

  • Regularities of Forming Calcium Phosphate Coatings on Zirconium from Electrolytes Based on Synthesized and Biological Hydroxyapatite. Sharkeev, Yu.; Kulyashova, K. // Russian Physics Journal;Feb2014, Vol. 56 Issue 10, p1170 

    Physical-chemical and mechanical properties of calcium phosphate coating formed by microarc oxidation method on the zirconium surface were investigated. Two types of electrolytes based on synthesized and biological hydroxyapatite (HA) were used to form the coatings. Deposition of the coating...

  • Synthesis and characterization of an experimental Zn-hydroxyapatite powders with application in dentistry. Prodan, Doina; Moldovan, Marioara; Prejmerean, Cristina; Silaghi- Dumitrescu, Laura; Boboia, Stanca; Popescu, Violeta; Pascalau, Violeta; Molea, Andreia; Diana, Lazar; Perhaiţa, Ioana // Key Engineering Materials;2014, Vol. 587, p43 

    In the present study, ZnO-hydroxyapatite (HA-Zn) was synthesized, thermally treated at different temperatures and then characterized. The HA-Zn powder was characterized mainly by FTIR and XRD, but have been performed investigations like SEM, BET and size distribution. The addition of ZnO in...

  • Influence of grain size and grain-size distribution on workability of granules with 3D printing. Spath, Sebastian; Seitz, Hermann // International Journal of Advanced Manufacturing Technology;Jan2014, Vol. 70 Issue 1-4, p135 

    3D printing is a promising method for fabrication of scaffolds. Microporosity is one of the most important properties of scaffolds and directly influences cell attachment, differentiation, proliferation, spreading, resorption, bone ingrowth, and contact. Microporosity depends on grain size (GS)...

  • ELECTROCRYSTALLIZATION KINETICS OF HYDROXYAPATITE AND CALCIUM PHOSPHATE COATINGS UNDER MAGNETIC FIELD. Daltin, A. L.; Chekkat, A. Ahmed; Millet, P.; Chopart, J. P. // Magnetohydrodynamics (0024-998X);2012, Vol. 48 Issue 2, p261 

    Calcium phosphate compounds have been synthesized on a T6A14V substrate by potentiostatic deposition under a magnetic field. The electrolyte bath used for electrode-position was based on an aqueous solution with Ca(NO3)2, 4H20 and NH4H2PO4 and several Ca/P ratios. Electrocrystallization kinetics...

  • Synthesis of Biphasic Calcium Phosphate by Hydrothermal Route and Conversion to Porous Sintered Scaffold. Sunarso; Noor, Ahmad Fauzi Mohd; Kasim, Shah Rizal; Othman, Radzali; Ana, Ika Dewi; Ishikawa, Kunio // Journal of Biomaterials & Nanobiotechnology;Jul2013, Vol. 4 Issue 3, p273 

    Biphasic calcium phosphate (BCP) consisting of hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) was successfully synthesized by new hydrothermal route using β-TCP as precursor. The X-ray diffraction analysis of as-synthesized powder indicated that β-TCP had been transformed...

  • Phase composition and structure of nanocrystalline products of solid-phase oxidative thermolysis of iron oxalate dihydrate. Yatsenko, D.; Pakharukova, V.; Tsybulya, S.; Matvienko, A.; Sidel'nikov, A. // Journal of Structural Chemistry;May2012, Vol. 53 Issue 3, p548 

    X-ray diffraction studies of the ultradisperse products of the solid-phase oxidative thermolysis of iron oxalate dehydrate are performed. Models are considered and diffraction patterns are calculated for the nanopowders of different crystalline modifications of iron oxide. Calculations are...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics