Improved performance of diatomite-based dental nanocomposite ceramics using layer-by-layer assembly

Xiaoli Lu; Yang Xia; Mei Liu; Yunzhu Qian; Xuefeng Zhou; Ning Gu; Feimin Zhang
January 2012
International Journal of Nanomedicine;2012, Vol. 7, p2153
Academic Journal
No abstract available.


Related Articles

  • DENTAL CERAMICS. Katz, R. Nathan // Ceramic Industry;Dec2000, Vol. 150 Issue 13, p18 

    Focuses on the dental applications of ceramics. Mechanism of teeth chewing; Specifications to be met by dental ceramics; Utility of ceramic filled resins as teeth fillings; Use of ceramic restorations to improve the wear and strength properties of teeth; Availability of ceramic materials as...

  • Nanocomposites: Paving the way to stronger materials. Wagner, H. Daniel // Nature Nanotechnology;Dec2007, Vol. 2 Issue 12, p742 

    The article discusses research on a layer-by-layer assembly approach that offers a way to reinforce strength in nanocomposite materials. It references a study by Nicholas Kotov and colleagues in a 2007 issue of "Science." They examined the mechanical properties of a multilayer montmorillonite...

  • Fabrication of ZnO Nanoparticle-Based Thin Films on Cotton Fabrics for Antibacterial Purpose. Uğur, Şule Sultan; Sariişik, Merih; Aktaş, Ahmet Hakan // Journal of Natural & Applied Sciences;2010, Vol. 14 Issue 1, p95 

    ZnO nanoparticle involved multilayer nanocomposite films were fabricated on cationic woven cotton fabrics by layer-by-layer molecular self-assembly technique. For cationic surface charge, cotton fabrics pretreated with 2,3-epoxypropyltrimethylammonuium chloride (EP3MAC) by pad-batch method. Nano...

  • resources.  // American Ceramic Society Bulletin;Jan/Feb2010, Vol. 89 Issue 1, p60 

    The article offers information on several researchers who made contributions to the improvement of ceramics. It includes Shanghai Institute of Ceramics research team including Laili Lin, Jiang Chang, and Congqin Ning for synthesis and characterization of nanocomposite powders made of...

  • Material Characterization of High Dielectric Constant Polymer-Ceramic Composite for Embedded capacitor to RF Application. Yang Rao; Jireh Yue; Wong, C.P. // Active & Passive Electronic Components;Mar2002, Vol. 25 Issue 1, p123 

    Embedded capacitor technology can improve electrical performance and reduce assembly cost compared with traditional discrete capacitor technology. Polymer-ceramic composites have been of great interest as embedded capacitor material because they combine the processability of polymers with the...

  • Stiffness Enhancement in Nacre-Inspired Nanocomposites due to Nanoconfinement. Keten, Sinan; Shao, Chen // Scientific Reports;11/20/2015, p16452 

    Layered assemblies of polymers and graphene derivatives employ nacre's tested strategy of intercalating soft organic layers with hard crystalline domains. These layered systems commonly display elastic properties that exceed simple mixture rule predictions, but the molecular origins of this...

  • Fabrication of catalytic ceramic membranes for water filtration. Davies, S. H.; Baumann, M. J.; Byun, S.; Corneal, L. M.; Tarabara, V. V.; Masten, S. J. // Water Science & Technology: Water Supply;2010, Vol. 10 Issue 1, p81 

    The paper describes the use of the layer-by-layer technique to coat ceramic membranes with iron and manganese oxide nanoparticles. The coatings are thin (<50nm) and relatively uniform. These coatings enhance the performance of the hybrid ozonation-filtration process. With the coated membranes it...

  • Theoretical Analysis of the Performance of Glucose Sensors with Layer-by-Layer Assembled Outer Membranes. Croce Jr., Robert A.; Vaddiraju, Santhisagar; Papadimitrakopoulos, Fotios; Jain, Faquir C. // Sensors (14248220);2012, Vol. 12 Issue 10, preceding p13402 

    Several graphs related to study on the performance of glucose sensors associated with layer-by-layer assembled outer membranes are presented.

  • PMI Trust Fund Awards.  // American Ceramic Society Bulletin;Apr2007, Vol. 86 Issue 4, p8 

    The article announces awards given to Apichart Limpichaipanit of the Pottery Mechanic Institute for his microstructural development of alumina and ceramic nano-composites and Matthew Sparkes for improving the performance of the contour basin.

  • Fast assembly of bio-inspired nanocomposite films. Vertlib, Viatcheslav; Dietiker, Marianne; Plötze, Michael; Yezek, Lee; Spolenak, Ralph; Puzrin, Alexander M. // Journal of Materials Research;Apr2008, Vol. 23 Issue 4, p15 

    This paper presents a spin-coating layer-by-layer assembly process to prepare multilayered polyelectrolyte-clay nanocomposites. This method allows for the fast production of films with controlled layered structure. The preparation of a 100-bilayer film with a thickness of about 330 nm needs less...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics