TITLE

HOT FORGING PROCESS

AUTHOR(S)
Guenther, Ross
PUB. DATE
October 2012
SOURCE
Ceramic Industry;Oct2012, Vol. 162 Issue 10, p13
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
The article focuses on the ceramic compositions for use in hot forging. The patent-pending method of ceramic production is dependent on the plastic nature of specific materials that have been heated, partially melted, and then pressed with about 1000-2000 psi. These ceramic materials are said to have come from most mine tailings, quarry fines, coal fly ash or other waste materials. Pilot production yielded quality porcelain tile that was proven stronger than Italian porcelain tile.
ACCESSION #
82116809

 

Related Articles

  • PORAINA CELTNIECĪBAS KERAMIKA BEZ IZDEGOŠĀM PIEDEVÄ€M. Svinka, Visvaldis; Svinka, Ruta; Bidermanis, Laimonis; Butlers, Andris; Krebs, Stephan // Material Science & Applied Chemistry;2009, Issue 19, p114 

    Ceramic materials with different properties and application by slip casting or plastic moulding from Devonian and Quaternary clays by using additives of metallic aluminium powder with different grain size are produced. Lightweight ceramic with porosity 49,5 % for Devonian clays and 29,7 % for...

  • Polysilazane Precursors. Lukacs III, Alexander // Ceramic Industry;Jun2006, Vol. 156 Issue 6, p13 

    Considers the use of polysilazane precursors as a cost-effective route for preparing ceramic materials. Information on polysilazanes; Difference between organic and inorganic polysilazanes; Methods developed to prepare crack-free monolithic ceramics from polysilazanes; Nanoscale applications of...

  • Creation of new porous permeable ceramic materials and technology for making articles from them — a real way for a technological breakthrough in the main branches of industry. Krasnyi, B. L.; Tarasovskii, V. P.; Krasnyi, A. B. // Refractories & Industrial Ceramics;Nov2008, Vol. 49 Issue 6, p437 

    The creation of new porous permeable ceramic materials with a different microstructure and a controlled pore size from nano- to microsize that have properties markedly surpassing those of traditional materials used in industry, and organization of the production of various objects made from them...

  • Preparation of Cu/Ni Toughened B4C Matrix Composite Materials. Bo Wang; Danyang Shen; Xiang Huang; Qiang Zhen; Qianjiang Yang // Material Sciences;Jan2012, Vol. 2 Issue 1, p22 

    Boron carbide (B4C) is an important ceramic material with excellent physical and chemical properties, such as a low density (2.52 g/cm3) and high melting point (2450°C). However, its two major drawbacks are the low fracture toughness and the very high sintering temperature for pure boron...

  • SELECTION OF PROCESS PARAMETERS IN GRINDING CERAMICS. DOBRESCU, Tiberiu; ENCIU, George; NICOLESCU, Adrian // Annals of DAAAM & Proceedings;Jan2009, p361 

    The operational properties and the performance of components consisting of ceramic materials, for example silicon carbide and silicon nitride, are mainly influenced by processing technology and process conditions. In grinding operations grain engagement and process kinematics determine the...

  • Influência da expansão por umidade no comportamento mecânico de argilas para uso em blocos de cerâmica vermelha - revisão. Andrade, R. A.; Medeiros, R. R.; Campos, L. F. A.; Ferreira, H. S.; Menezes, R. R.; Neves, G. A.; Ferreira, H. C. // Ceramica;jul2011, Vol. 57 Issue 343, p329 

    No abstract available.

  • PREFACE. Hussain, Nandyala Sooraj; Santos, José Domingos // Solid State Phenomena;2014, Vol. 207, preceding p110 

    An introduction is presented in which the author discusses various topics within the issue including glass ceramic materials, linear and non- linear properties of different materials and refractive index.

  • Preface. dos Santos Ortega, Fernando // Materials Science Forum;2017, Vol. 881, preceding p4 

    No abstract available.

  • Preparation and investigation of porous aluminosilicate ceramic materials. L. Morozova; A. Lapshin; I. Drozdova // Glass Physics & Chemistry;Aug2008, Vol. 34 Issue 4, p443 

    Abstract  The optimum conditions for the synthesis of macroporous aluminosilicate ceramic materials are chosen. The dependence of the total porosity of the ceramic materials on the initial components is established. The pore size distribution is investigated. The chemical durability of the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics