TITLE

INVESTIGATION OF THE MECHANICAL INTERACTIONS AT THE INTERFACE OF WOOD-CEMENT COMPOSITES BY MEANS OF ELECTRONIC SPECKLE PATTERN INTERFEROMETRY

AUTHOR(S)
Frybort, Stephan; Mauritz, Raimund; Teischinger, Alfred; Müller, Ulrich
PUB. DATE
May 2012
SOURCE
BioResources;May2012, Vol. 7 Issue 2, p2483
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This study investigates the bonding behaviour of Norway spruce wood strands to a surrounding cement matrix. Effects of wood swelling and shrinking during cement curing were studied by using strands of various thicknesses. The deformation of the spruce wood strands and the surrounding cement matrix, as well as the interface between the wood and the cement were examined using Electronic Laser Speckle Interferometry (ESPI) while applying a pull-out load. Sample deformation was transformed to shear strain maps, showing which side of the strand was tightly bonded to the cement matrix. The analysis of the strain maps proved that all strands were tightly bonded to the cement matrix on only one side. No shear deformation was observed on the loosely bonded side, meaning that there was no adhesion on that side between the wood strand and the cement matrix. Manufacturing of strands results in different surface characteristics and surface roughness. Bringing together the ESPI results with the roughness measurements, it was shown that only the comparably rougher surface adheres to the cement matrix. In a cement bonded composite (CBC) made of lignocellulosics to a greater or lesser extent, only half of the contact area is therefore able to transfer load.
ACCESSION #
79791629

 

Related Articles

  • Observing Deformation and Fracture of Rock with Speckle Patterns. Haggerty, M.; Lin, Qing; Labuz, J. // Rock Mechanics & Rock Engineering;Jul2010, Vol. 43 Issue 4, p417 

    The high resolution technique of electronic speckle pattern interferometry (ESPI) can be very useful in determining deformation of laboratory specimens and identifying initiation of failure. The in-plane ESPI theory is described and the fringe pattern of the processed ESPI image is analyzed to...

  • THERMAL DEFORMATION ANALYSIS OF ALUMINIUM HEAT SINK USING ELECTRONIC SPECKLE PATTERN INTERFEROMETRY. Retheesh, R.; Radhakrishnan, P.; Singh, Rakesh Kumar; Mujeeb, A. // International Journal of Advances in Engineering & Technology;May2014, Vol. 7 Issue 2, p431 

    When a solid material is subjected to severe temperature variations, the structure of the material changes and produces a volumetric enlargement which induces stresses in the material. Thermally induced deformation analysis has considerable importance in the mechanical and structural design...

  • Development of Speckle Interferometry Algorithm and System. Shamsir, A. A. M.; Jafri, M. Z. M.; Lim, H. S. // AIP Conference Proceedings;5/25/2011, Vol. 1341 Issue 1, p131 

    Electronic speckle pattern interferometry (ESPI) method is a wholefield, non destructive measurement method widely used in the industries such as detection of defects on metal bodies, detection of defects in intergrated circuits in digital electronics components and in the preservation of...

  • DIC-Based Surface Motion Correction for ESPI Measurements. Bingleman, L. W.; Schajer, G. S. // Experimental Mechanics;Sep2011, Vol. 51 Issue 7, p1207 

    Electronic Speckle Pattern Interferometry (ESPI) provides a sensitive technique for measuring surface deformations. The technique involves comparison of the speckle phase angles within surface images measured before and after material deformation. This phase angle comparison requires that the...

  • Deformation Measurement of Composite Laminate With Impact Damage Under Compressive Loads. Jiangtao Ruan; Shibin Wang; Jingwei Tong; Min Shen; Aymerichz, F.; Priolo, P. // Polymers & Polymer Composites;2012, Vol. 20 Issue 1/2, p177 

    The out-of-plane displacement fields for a cross-ply laminate [03/903]s with impact damage under axial compression are investigated using carrier electronic speckle pattern interferometry (carrier-ESPI) in this paper. The compression after impact (CAI) test is conducted on rectangular specimen...

  • Investigation of the Deformation and Fracture of Composites with the Help of Electronic Speckle Interferometry. Voronyak, T. I.; Ivanyts’kyi, Ya. L.; Muravs’kyi, L. I.; Semenets’, O. I. // Materials Science;Sep2013, Vol. 49 Issue 2, p270 

    We develop a procedure for the experimental investigations of the deformation and fracture of specimens of coal-plastic composites. A schematic diagram of the experimental installation is presented and the results of investigations are analyzed. We also show the efficiency of electronic speckle...

  • Study on the double pulse laser dynamic electronic speckle measurement based on FPGA. Fusheng Yu; Tengfei Li; Yanchao Wu; Zhongguo Sun; Shengjiang Yin // Advanced Materials Research;2014, Issue 900, p617 

    Speckle pattern interferometry can be used to measure he displacement, strain and vibration, surface deformation and surface roughness. And dynamic laser speckle measurement with high accuracy has been widely used in measurement of surface deformation. Tool breakage is the main bottleneck of...

  • Assessment of Initial Reaction of Nasomaxillary Complex to Maxillary Protraction using Electronic Speckle Pattern Interferometry. Poornima Raghuraman Jnaneshwar; Prem Kumar Sridhar; Manjula, W. S.; Bhaduri, Basanta // Journal of Indian Orthodontic Society;Jan-Mar2013, Vol. 47 Issue 1, p10 

    Objective: The aim of this study was to evaluate the initial reaction of nasomaxillary complex to protraction force using electronic speckle pattern interferometry (ESPI). Materials and methods: The experiment was done on a dry human skull. Orthopedic protraction forces were applied bilaterally...

  • Numerical Simulation of Tension Properties for Al-Cu Alloy Friction Stir-Welded Joints with GTN Damage Model. Sun, Guo-Qin; Sun, Feng-Yang; Cao, Fang-Li; Chen, Shu-Jun; Barkey, Mark // Journal of Materials Engineering & Performance;Nov2015, Vol. 24 Issue 11, p4358 

    The numerical simulation of tensile fracture behavior on Al-Cu alloy friction stir-welded joint was performed with the Gurson-Tvergaard-Needleman (GTN) damage model. The parameters of the GTN model were studied in each region of the friction stir-welded joint by means of inverse identification....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics