The influence of material properties and crack length on the Q-stress value near the crack tip for elastic-plastic materials for single edge notch plate in tension

Graba, M.
April 2011
Archives of Civil & Mechanical Engineering (Oficyna Wydawnicza P;2011, Vol. 11 Issue 2, p301
Academic Journal
In the paper the values of the Q-stress determined for various elastic-plastic materials for single edge notched plates in tension (SEN(T)) presented. Used in the paper specimens, are the basic structural elements, which can be used to idealizing real construction, based on FITNET procedure. The influence of the yield strength, the work-hardening exponent and the crack length on the Q-parameter was tested. The numerical results were approximated by the closed form formulas. All obtained results may be a handy catalogue of the J-Q curves, which may be useful in engineering practice.


Related Articles

  • Determination of Second-Order term Coefficients for the Inclined Crack in Orthotropic Plate using Singular Finite Elements. Lim, Won-Kyun // International Journal of Fracture;Mar2011, Vol. 168 Issue 1, p125 

    The finite element method with quarter-point crack-tip elements is used and a simple formula for obtaining the coefficients of the second-order terms in the series expansion for near crack tip stresses in orthotropic materials under biaxial loading is presented. This formula is obtained by...

  • DAÄ°RESEL DELÄ°KLÄ° DÄ°KDÖRTGEN LEVHANIN H-TÄ°PÄ° SONLU ELEMANLAR Ä°LE UYARLAMALI ANALÄ°ZÄ°. Alyavuz, Bahadır // Journal of the Faculty of Engineering & Architecture of Gazi Uni;Mar2007, Vol. 22 Issue 1, p39 

    Stress analysis of rectangular plates with a circular hole is carried out by a program written in MATLAB® environment and iterative h-version adaptive finite element method. Two different approaches were used in the adaptive solution of loaded plate. In the first one, stress calculation was...

  • Investigation of Stress Intensity Factor for a Plate with Hole Using FEA. Kumar, P. Ashok; Reddy, P. Ravinder; Chandra, N. Sharath; Gupta, A. V. S. S. K. S. // International Journal of Theoretical & Applied Mechanics;2009, Vol. 4 Issue 2, p223 

    This paper presents work, concerning the determination of stress intensity factor for a finite width plate containing cracked circular hole, using the finite element method. Since geometries with very small cracks are of particular relevance for equivalent initial flaw size fatigue studies,...

  • Effect of biaxial loads on elastic-plasticJand crack tip constraint for cracked plates: finite element study. Kim, Yun-jae; Chung, Ki-hyun; Kim, Jin-su; Kim, Young-jin // International Journal of Fracture;Dec2004, Vol. 130 Issue 4, p803 

    Based on detailed two-dimensional (2-D) and three-dimensional (3-D) finite element (FE) analyses, this paper attempts to quantify in-plane and out-of-plane constraint effects on elastic-plasticJand crack tip stresses for a plate with a through-thickness crack and semi-elliptical surface crack...

  • Analysis of the Crack of Heavy Dump Truck Cargo Body Floor. Xiangyin Liu; Dawei Liu; Xiaodong Cheng; Minjie Si // Applied Mechanics & Materials;2014, Vol. 723, p3 

    In view of the heavy dump truck occurred cargo body floor cracking problems in the process of using, this paper established cargo body finite element analysis (FEA) model with the shell elements as basic element, and calculated the strength of the cargo body floor by using the Hyperworks (a FEA...

  • Bimaterial Four Point Bend Specimen with Sub-Interface Crack. Marsavina, Liviu; Piski, Timea // International Journal of Fracture;Aug2010, Vol. 164 Issue 2, p325 

    Asymmetric four point bend specimens are often used for determination mode II fracture toughness. Different corrections were proposed to classical solution of Stress Intensity Factors for this specimen. This paper provides a solution for a bi-material four point specimen with sub-interface...

  • Numerical analysis of dynamic crack propagation in rubber. Elmukashfi, Elsiddig; Kroon, Martin // International Journal of Fracture;Oct2012, Vol. 177 Issue 2, p163 

    In the present paper, dynamic crack propagation in rubber is analyzed numerically using the finite element method. The problem of a suddenly initiated crack at the center of stretched sheet is studied under plane stress conditions. A nonlinear finite element analysis using implicit time...

  • Numerical Modelling of The Crack Tip Singularity. Abdelaziz, Y.; Abou-bekr, N.; Hamouine, A. M. // International Journal of Materials Science;2007, Vol. 2 Issue 1, p65 

    On the basis of fracture mechanics, a numerical study has been considered in order to model the singularity near the crack-tip. The aim of this work is to estimate numerically the values of stress intensity factors using different techniques (classical finite element, enriched finite element,...

  • Three-dimensional problem of the limit state of a main pipeline with corrosion damage. Astanin, V.; Borodachev, N.; Kuznetsov, N. // Strength of Materials;Aug2011, Vol. 43 Issue 5, p548 

    A modification of a method for the determination of limiting pressure for gas and oil pipelines with corrosion damages of local type under the action of internal pressure and with allowance for temperature field is considered. The problem is solved numerically in three-dimensional formulation....


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics