TITLE

Position sensitive sensors provide background suppression

PUB. DATE
March 1998
SOURCE
Environmental Engineering;Mar98, Vol. 11 Issue 1, p35
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Provides information on the D1 series of triangular photoelectric sensors from Matsushita Automation Controls. Use of a position sensitive device for the sensors; Self-diagnosis function of the sensors.
ACCESSION #
7678682

 

Related Articles

  • Low noise position sensitive detector for optical probe beam deflection measurements. Spear, Jonathan D.; Russo, Richard E. // Review of Scientific Instruments;Jul96, Vol. 67 Issue 7, p2481 

    Reports on the design of an optical position sensor that uses discrete photodiodes electrically connected in parallel, with opposing polarities. Restriction of the acceptance angle of the detector; Response of the device to displacements of an optical spot; Measurements by the sensor of the...

  • Optical sensor may help robots feel.  // Machine Design;2/23/95, Vol. 67 Issue 4, p42 

    Examines the potential of a prototype optical position sensor as a more reliable replacement for potentiometers. Application as tactile sensor for robots due to its compactness; Replacement of the light pipes with fiber optic cables to shrink the sensor; Advantage over potentiometers.

  • Electron detection by resistive charge division based position sensitive detectors. Ra¨isa¨nen, J.; Harju, O.; Tjurin, G.; Riihima¨ki, I.; Lindholm, L. // Review of Scientific Instruments;Dec2001, Vol. 72 Issue 12, p4358 

    The use of resistive charge division based solid-state detectors for position sensing of electrons has been studied. The operational conditions having importance for device performance are considered for one- and two-dimensional detectors manufactured by SiTek®. The parameter of main interest...

  • Capacitive sensor for micropositioning in two dimensions Kolb, P. W.; Kolb, P.W.; Decca, R. S.; Decca, R.S.; Drew, H. D.; Drew, H.D. // Review of Scientific Instruments;Jan1998, Vol. 69 Issue 1, p310 

    Develops a capacitive sensor for micropositioning in two dimensions. Principles of the sensing operation; Compatibility with high magnetic field and cryogenic temperature; Effect of electronics used on positioning resolution; Factors limiting the position reproducibility.

  • Radiation position-sensitive detector based on plastic scintillating fibers. Ikhlef, A.; Skowronek, M. // Review of Scientific Instruments;Sep93, Vol. 64 Issue 9, p2566 

    The applicability of plastic scintillation fibers as a radiation position detector is evaluated for low-energy x-ray irradiation. A continuous x-ray generator with a copper anode is used as a source radiating very intense lines: K[sub α2]=8.02 keV, K[sub α1] = 8.04 keV, K[sub β1] = 8.9...

  • Limits of different detection schemes used in the optical beam deflection method. Garcia-Valenzuela, A. // Journal of Applied Physics;8/1/1997, Vol. 82 Issue 3, p985 

    Compares the theoretical performances of a split detector and lateral effect detector used as a position sensitive device (PSD) in the optical beam deflection method. Three types of PSD; Cylindrical mirror as an amplification stage.

  • Method for fabricating a simple low-cost position-sensitive photodetector. Burns, Michael J. // Review of Scientific Instruments;Mar89, Vol. 60 Issue 3, p327 

    We describe a very simple method for making a low-cost wide-band position-sensitive photodetector (PSD) and preamplifier circuit. The detector is most suitable for experiments where a laser is used to measure the deflection (linear or angular) of some part of the experimental apparatus. The...

  • A temporally resolved position sensing device for autofocusing. Shie, Jin-Shown; Chang, Gow-Dawn // Review of Scientific Instruments;Mar91, Vol. 62 Issue 3, p825 

    A position-sensing method for autofocus purpose is demonstrated, based on the triangular ranging principle applied to a photoconductive Haynes-Shockley device. This method provides a linear variation of the minority-carrier transit time in the sensor with respect to the inverse of the object...

  • A fast low noise charge preamplifier for position sensitive detectors. Beltra´n, David; Perlas, Josep Antoni // Review of Scientific Instruments;Aug2002, Vol. 73 Issue 8, p3075 

    We present the design and the results of the evaluation of a fast, low noise, charge preamplifier. This device uses commercial circuits; the advantages over classical circuits based on transistors are presented. These include short development time, high reliability and reproducibility, and easy...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics