TITLE

Molecular-beam-epitaxial growth and characterization of Zn1-xCaxSySe1-y alloys for blue-green laser applications

AUTHOR(S)
Jobst, B.; Lunz, U.; Zerlauth, S.; Cerva, H.; Hommel, D.; Landwehr, G.
PUB. DATE
January 1996
SOURCE
Journal of Applied Physics;1/15/1996, Vol. 79 Issue 2, p763
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Presents a study which examined the characterization of Zn[sub1-x]Ca[sybx]S[suby]se[sub1-y] alloys for blue-green laser applications. Experimental procedures; Results of the study.
ACCESSION #
7662246

 

Related Articles

  • Formation of Ca--Mg--Zn bulk glassy alloy by casting into cone-shaped copper mold. Park, E. S.; Kim, D. H. // Journal of Materials Research;Mar2004, Vol. 19 Issue 3, p685 

    A new Ca-Mg-Zn alloys having significantly improved glass-forming ability (GFA) has been developed. The ternary Ca65Mg15Zn20 bulk metallic glass with diameter of at least 15 mm is successfully fabricated by conventional copper-mold casting method in air atmosphere. The critical cooling rate for...

  • Photo-pumped ZnCdSe/ZnCdMgSe blue-green quantum well lasers grown on InP substrates. Yongming Guo; Aizin, Gregory // Applied Physics Letters;3/17/1997, Vol. 70 Issue 11, p1351 

    Reports the operation of a blue-green ZnCdSe or ZnCdMgSe quantum well lasers grown on InP substrates. Analysis on the spectra of edge emission below threshold and above lasing threshold; Effect of the presence of strain in the active region; Alternative materials proposed for the fabrication of...

  • Microstructure evolution of laser surface remelted Zn-2.7 wt.%Cu hyperperitectic alloy. Yunpeng Su; Xin Lin; Sen Yang; Meng Wang; Weidong Huang // Journal of Materials Science;Jul2007, Vol. 42 Issue 13, p4763 

    Laser surface remelting experiments on Zn-2.7 wt.%Cu hyperperitectic alloy were performed by using a 5kW CW CO2 laser at beam scanning velocities ranging between 6 and 1,207 mm/s. With the increase of the growth rate, the microstructures of Zn-2.7 wt.% Cu alloy changed from planar interface to...

  • WELDING OF MAGNESIUM ALLOYS.  // JOM: The Journal of The Minerals, Metals & Materials Society (TM;May2006, Vol. 58 Issue 5, p58 

    The article focuses on the welding processes for magnesium alloys. A study reported on a very extensive evaluation of welding numerous wrought and cast magnesium alloys including the thorium-containing creep-resistant alloys. It was found that increased zinc concentrations led to increased weld...

  • Microstructures and mechanical properties of Mg–Al–Zn–Ca alloys fabricated by high frequency electromagnetic casting method. Park, J.; Kim, M.; Yoon, U.; Kim, W. // Journal of Materials Science;Jan2009, Vol. 44 Issue 1, p47 

    The microstructures and mechanical properties of AZ31 and 1 wt%Ca-containing AZ31 billets fabricated using EMC (Electromagnetic Casting) and EMS (Electromagnetic Stirring) were examined. The results show a great potential of producing high-quality surface magnesium billets with fine-grained...

  • Effect of Zn content on the microstructures and mechanical properties of laser beam-welded ZK series magnesium alloys. Yu, Z. H.; Yan, H. G.; Chen, J. H.; Wu, Y. Z. // Journal of Materials Science;Jul2010, Vol. 45 Issue 14, p3797 

    The effect of Zn content on the microstructures and mechanical properties of laser beam welded ZK series magnesium alloys (ZK21, ZK40, and ZK60) has been studied. Owing to the lower heat input, laser beam welding can successfully be employed to weld ZK series magnesium alloys having Zn content...

  • Precipitation Hardening in Mg-Ca-Zn Alloys. Bamberger, M.; Levi, G.; Sande, J. B. Vander // Metallurgical & Materials Transactions. Part A;Feb2006, Vol. 37 Issue 2, p481 

    Based on thermodynamic calculations, four alloys in the system Mg-Ca-Zn produced by gravity die casting were solution treated and aged at 175 �C for different times. The scanning electron microscopy and X-ray diffraction analyses of the solutionized alloys were in good agreement with the...

  • The Hard Facts About Metallic Glass.  // Trends Magazine;Jul2011, Issue 99, p23 

    The article presents the anticipated trends in applications of metallic glass. It mentions a study in which researchers at Switzerland's ETH Zurich create magnesium-zinc-calcium alloy-based metallic glass. It also predicts that metallic glasses will become a common material in several products...

  • High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance. Hofstetter, J.; Becker, M.; Martinelli, E.; Weinberg, A.; Mingler, B.; Kilian, H.; Pogatscher, S.; Uggowitzer, P.; Löffler, J. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Apr2014, Vol. 66 Issue 4, p566 

    This article deals with the development of fine-grained high-strength low-alloy (HSLA) magnesium alloys intended for use as biodegradable implant material. The alloys contain solely low amounts of Zn and Ca as alloying elements. We illustrate the development path starting from the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics