TITLE

Implementation of PID Controller in MATLAB for Real-time Position Control of Faulhaber DC Micromotor

AUTHOR(S)
Manjunatha, Reddy H. K.; Immanuel, J.; Shrimanth, Sudheer L.; Parvathi, C. S.; Bhaskar, P.
PUB. DATE
May 2012
SOURCE
Sensors & Transducers (1726-5479);May2012, Vol. 140 Issue 5, p88
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this study, the Proportional-plus-Integral-plus-Derivative (PID) controller is implemented through MATLAB script file for real-time angular position control of a Faulhaber DC Micromotor. MATLAB serves as a good alternative to low-level programming languages such as 'C'. The entire process of data transfer between PC and external world or vice-versa is controlled by programming through script files in MATLAB. Different standard test command signals such as step, square, stair case, and ramp are applied. The controller implemented in MATLAB provides better response in terms of fast rise time, settling time, and reduced steady state error. The experimentally obtained results show the closer tracking response with the standard test inputs. An indigenously designed AD-DA board is interfaced to PC through PCI digital input/output and timer (DIOT) card to carry out the proposed real time study.
ACCESSION #
76359625

 

Related Articles

  • Power quality monitoring and evaluation system for micro-gridi based on LabVIEW. SHEN Hui; XIE Zhi-yun; YU Zhi-wen; FANG Xiao-hui; WENG Guo-qing // Journal of Mechanical & Electrical Engineering;Sep2014, Vol. 31 Issue 9, p1201 

    Aiming at lack of the power quality real-time monitoring and the software of the comprehensive evaluation system for micro-grid, a reasonable method of power quality comprehensive evaluation was studied, a system for power quality monitoring and comprehensive evaluation based on Lab VIEW was...

  • TRAJECTORY CONTROL OF TWO LINK ROBOTIC MANIPULATOR USING PID. Khatri, Manjeet; Khatri, Pooja // Golden Research Thoughts;Nov2013, Vol. 3 Issue 5, p1 

    This paper presents the design and implementation of PID controller for the general form of two-link planar robotic manipulator. Also for comparative analysis, proportional-derivative (PD), is implemented on the same system under same conditions. The comparative analysis of the results...

  • MATLAB RTW Tool Application to Configure RBF Neural Network PID Controller of Turntable Servo System. Yanmin Wu; Chun Huang; Wei Deng; Guangzhao Cui // International Review on Computers & Software;Sep2012, Vol. 7 Issue 5, p2750 

    The conventional PID controller is mostly effective for linear or nearly linear control systems. However, turntable servo system is highly nonlinear and uncertainty plants, nonlinear PID controllers are needed in order to satisfactorily control this system. An adaptive neural network PID control...

  • Fuzzy PID Control for Fast-Steering Mirror System. Xuejin Bai; Yongming Qiao // Applied Mechanics & Materials;2014, Issue 568-570, p1026 

    Fast-steering mirror system demands higher accuracy and fast responding speed to track targets, but the conventional PID controllers cannot meet the demands. Instead, the fuzzy PID control can greatly improve the capturing and tracking capacities to high-speed dynamic targets. So we apply the...

  • Brushless DC Motor Fuzzy PID Control System and Simulation. Guangya Liu; Jie Min; Qiulin Sheng // Sensors & Transducers (1726-5479);Oct2014, Vol. 181 Issue 10, p111 

    For digital model of brushless DC motor, simulation models can be built in MATLAB / Simulink. Simulation parameters are selected parameters according to the actual system. The conventional PID control algorithm produce large overshoot and oscillation, we use fuzzy logic PID algorithm to response...

  • Mechanical Research with PID Parameters Tuning Based on MATLAB/Simulink. Qingqing Huang; Tao Wu // Advanced Materials Research;2014, Issue 951, p30 

    The PID parameters tuning is to determine the proportional coefficient Kp, integral time Ti and differential time Td of the regulator. It is a very complicated and cumbersome process. This paper describes the strategy and the steps of the critical proportion method, and completes the simulation...

  • Simulation Study on the Fuzzy Self-adapting PID Controller Design. Zhu Xuexuan // Journal of Convergence Information Technology;Apr2013, Vol. 8 Issue 7, p708 

    When object changes in traditional PID, controller's parameter can hardly achieve automatic adjustment. Therefore, we combine fuzzy control with PID control and use fuzzy reasoning method to realize the on-line self-tuning of PID parameters, as so t render relatively fine self-adaption to...

  • Simulation of Smith fuzzy PID temperature control in enzymatic detection of pesticide residues. Sun Jun; Zhang Meixia; Li Zhengming; Wu Xiaohong // International Journal of Agricultural & Biological Engineering;Feb2015, Vol. 8 Issue 1, p50 

    Enzyme activity is easily influenced by temperature, resulting in accuracy decline of enzymatic detection of pesticide residues. In this study, a controller which controls the internal temperature of the pesticide residues detector was simulated and analyzed. The mathematical model of...

  • DYNAMICS ANALYSIS OF A MICROBIAL FUEL CELL SYSTEM AND PID CONTROL OF ITS POWER AND CURRENT BASED ON THE CRITICAL PROPORTION DEGREE METHOD. Aimin An; Jing Wang; Haochen Zhang; Guoqiang Yang // Environmental Engineering & Management Journal (EEMJ);Aug2015, Vol. 14 Issue 8, p1821 

    In this paper, the structure and working principles of a microbial fuel cell (MFC) are analysed, and a mathematical simulation model of MFCs is established based on the electrochemical equation, kinetic equation and material balance equation of a MFC. A simulation analysis and discussions are...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics