TITLE

A prototypical model of a dislocation source capable of generating shear band structures in crystalline solids during shock or impact

AUTHOR(S)
Coffey, C. S.
PUB. DATE
August 1989
SOURCE
Journal of Applied Physics;8/15/1989, Vol. 66 Issue 4, p1654
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the response of crystalline solids to high rate loading by shock or impact determined by the formation of shear band structures and the subsequent response of the localized structures to the applied stress. Maximum dislocation rate of the source; Rate of generation of dislocations; Potential sources for generating grain-boundary.
ACCESSION #
7626525

 

Related Articles

  • EQUILIBRIUM DISLOCATION STRUCTURES AT GRAIN BOUNDARIES IN SUBSURFACE AREAS OF POLYCRYSTALLINE GRAPHENE AND ULTRAFINE-GRAINED METALS. Konakov, Ya. V.; Ovid'ko, I. A.; Sheinerman, A. G. // Reviews on Advanced Materials Science;2014, Vol. 37 Issue 1/2, p83 

    A theoretical model is suggested which describes distribution of grain boundary (GB) dislocations at GBs located in subsurface areas of polycrystalline graphene and ultrafine-grained metals. Within the suggested model, spatial distribution of GB dislocations -- basic structural units of GBs --...

  • Strain heterogeneity and damage nucleation at grain boundaries during monotonic deformation in commercial purity titanium. Bieler, T. R.; Crimp, M. A.; Yang, Y.; Wang, L.; Eisenlohr, P.; Mason, D. E.; Liu, W.; Ice, G. E. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Dec2009, Vol. 61 Issue 12, p45 

    Heterogeneous strain was analyzed in polycrystalline, commercial-purity titanium using many experimental techniques that provide information about microstructure, dislocation arrangement, grain orientation, orientation gradients, surface topography, and local strain gradients. The recrystallized...

  • Extremely high oxygen sensing of individual ZnSnO3 nanowires arising from grain boundary barrier modulation. Xue, X. Y.; Feng, P.; Wang, Y. G.; Wang, T. H. // Applied Physics Letters;7/9/2007, Vol. 91 Issue 2, p022111 

    Extremely high oxygen sensing is realized from individual ZnSnO3 nanowires with abundant grain boundaries. The current across one single ZnSnO3 nanowire increases by about six orders of magnitude, from 1.20×10-7 to 3.78×10-1 μA, as the oxygen pressure decreases from 3.7×104 to...

  • Grain Boundary Sliding during Diffusion and Dislocation Creep in a Mg-0.7 Pct Al Alloy. Kottada, R. S.; Chokshi, A. H. // Metallurgical & Materials Transactions. Part A;Aug2007, Vol. 38 Issue 8, p1743 

    Early studies on grain boundary sliding (GBS) in Mg alloys have suggested frequently that the contribution of GBS to creep is high even under conditions corresponding to dislocation creep. The role of creep strain and grain size in influencing the experimental measurements has not been clearly...

  • Intergranular Corrosion of Σ9 Copper Bicrystal with Gradually Changed Misorientation in Young's Dislocation Etchant. Takehara, Yuhei; Fujiwara, Hiroshi; Miyamoto, Hiroyuki // Metallurgical & Materials Transactions. Part A;Aug2013, Vol. 44 Issue 8, p3685 

    The allowable deviation to preserve the 'specialness' of a coincident site lattice (CSL) boundary was shown using a pure copper bicrystal which was designed to have gradually changed deviation around 〈110〉 axis from near-ideal Σ9{221} to a random relation. The grain boundary...

  • The new trends in fabrication of bulk nanostructured materials by SPD processing. Valiev, R. Z. // Journal of Materials Science;Mar2007, Vol. 42 Issue 5, p1483 

    During the past decade, fabrication of bulk nanostructured metals and alloys using severe plastic deformation (SPD) has been evolving as a rapidly advancing direction of nanomaterials science and technology aimed at developing materials with new mechanical and functional properties for advanced...

  • Creep-Environment Interactions in Dwell-Fatigue Crack Growth of Nickel Based Superalloys. Maciejewski, Kimberly; Dahal, Jinesh; Sun, Yaofeng; Ghonem, Hamouda // Metallurgical & Materials Transactions. Part A;May2014, Vol. 45 Issue 5, p2508 

    A multi-scale, mechanistic model is developed to describe and predict the dwell-fatigue crack growth rate in the P/M disk superalloy, ME3, as a function of creep-environment interactions. In this model, the time-dependent cracking mechanisms involve grain boundary sliding and dynamic...

  • Analysis of Orientation Relations Between Deformed Grains and Recrystallization Nuclei. West, Stine; Winther, Grethe; Jensen, Dorte // Metallurgical & Materials Transactions. Part A;May2011, Vol. 42 Issue 5, p1400 

    Nucleation in 30 pct rolled high-purity aluminum samples was investigated by the electron backscattering pattern method before and after annealing. A total of 29 nuclei including two twins were observed, and approximately one third of these nuclei had orientations not detected in the deformed...

  • Cyclic-loading-induced accumulation of geometrically necessary dislocations near grain boundaries in an Ni-based superalloy. E.-Wen Huang; Barabash, Rozaliya I.; Ice, Gene E.; Wenjun Liu; Yee-Lang Liu; Ji-Jung Kai; Liaw, Peter K. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Dec2009, Vol. 61 Issue 12, p53 

    In this study, the fatigue-induced microstructure produced in a nickel-based polycrystalline superalloy that was subjected to cyclic loading was characterized by polychromatic x-ray microdiffraction (PXM) together with in-situ neutron diffraction and transmission-electron microscopy (TEM)....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics