TITLE

Effect of ferrite-bainite structure on the properties of high-strength pipe steel

AUTHOR(S)
Smirnov, M.; Pyshmintsev, I.; Maltseva, A.; Mushina, O.
PUB. DATE
January 2012
SOURCE
Metallurgist;Jan2012, Vol. 56 Issue 1/2, p43
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Mechanical properties of pipe steel 07G2MFB are studied after cooling from the austenitic region at rates of 0.9-32�C/sec making it possible to obtain a ferrite-bainite structure with different ratios of structural components. It is shown that formation of a predominantly bainitic structure formed with high cooling rates provides less crack resistance with static loading than a structure in which polygonal ferrite predominates. A bainitic structure is preferable with dynamic loading. Treatment leading to formation of coarse islands of martensite-austenite (MA) component within a ferrite-bainite structure has an unfavorable effect on crack tip opening displacement CTOD, ductile-brittle transition temperature T, and resistance to hydrogen embrittlement ??/?.
ACCESSION #
76172296

 

Related Articles

  • Effect of structural anisotropy of ferrite-bainite pipe steel on mechanical properties in tensile and impact bending tests. Kichkina, A.; Matrosov, M.; Efron, L.; Klyukvin, M.; Golovanov, A. // Metallurgist;Nov2010, Vol. 54 Issue 11/12, p808 

    The mechanical properties of thick rolled plate for main pipelines with a ferrite-bainite microstructure in different directions over the plate plane are determined, mechanical property anisotropy is revealed, and its features are studied. It is established that the structure of bainite,...

  • Influence of Isothermal Bainite Transformation Time on Microstructure and Mechanical Properties of Hot-Dip Galvanized TRIP Steel. Ding, Wei; Tang, Di; Jiang, Haitao; Huang, Wei // Journal of Materials Engineering & Performance;Aug2011, Vol. 20 Issue 6, p997 

    The influence of isothermal bainitic transformation (IBT) time on microstructure and mechanical properties of hot-dip galvanized TRIP steel with 0.20C-1.50Mn-1.2Al-0.26Si was investigated using optical microscopy, x-ray diffraction (XRD), Transmission Electron Microscope (TEM), dilatometry, and...

  • Effect of tempering temperature on mechanical properties and microstructures of 800MPa microalloy low carbon bainitic steel. Kelu Wang; Xin Li; Xianjuan Dong // Advanced Materials Research;2014, Issue 893, p406 

    The effect of tempering temperature on the microstructures and mechanical properties of a microalloy low carbon bainitic steel was investigated by microscopic analysis and testing of mechanical properties. The results show that the microstructures of the tested steel primarily consists of lath...

  • Influence of Cooling Rate on Final Properties of Laboratory Rolled Products. Kawulok, Petr; Schindler, Ivo; Milan Čmiel, Karel; Sojka, Jaroslav; Rusz, Stanislav; Kawulok, Rostislav // Key Engineering Materials;2014, Vol. 592/593, p602 

    The objective of investigation was to determine the influence of chosen cooling rates after finish rolling on final microstructural and mechanical properties of the laboratory rolled products from steel 42CrMo4. Metallographic analysis showed that microstructure of rolled products, which were...

  • Role of structural orientation on the susceptibility of 2205 duplex stainless steel to hydrogen embrittlement. Sharrfeddin, A.; Musa, S. M.; Elshawesh, F. M. // AIP Conference Proceedings;9/6/2012, Vol. 1476 Issue 1, p199 

    Relationship between the microstructure directionality of delta ferrite and austenite islands and the crack morphology, crack velocity and time to failure of the mechanically notched duplex stainless samples tested in hydrogen bearing environment was assessed in aqueous solution of 3.5%...

  • Microstructures and Mechanical Behavior of Fe-18Mn-10Al-(0.8-1.2)C Steels. Ding, Hua; Han, Dong; Cai, Zhihui; Wu, Zhiqiang // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Sep2014, Vol. 66 Issue 9, p1821 

    In the present work, two Fe-18Mn-10Al- xC low-density steels with different C concentrations were investigated. It is revealed that the difference in C concentration resulted in a marked difference in the microstructures of the investigated steels. The microstructure consisted of ferrite and...

  • Dilatometric measurement of carbon enrichment in austenite during bainite transformation. Chupatanakul, Smati; Nash, Philip // Journal of Materials Science;Aug2006, Vol. 41 Issue 15, p4965 

    The article focuses on the transformation dynamics in the carburized case of a 4317M2 steel. In order to study the transformation dynamics, experimental heats with carbon contents of 0.58% and 0.82% are produced. The carbon concentration of bainitic ferrite during transformation is one of the...

  • Production of high-strength hot-rolled steel to make energy-absorbing automotive parts. Vasiliev, I.; Molostov, M.; Kurban, V.; Savenkov, V.; Semenov, P.; Tazov, M. // Metallurgist;Jan2012, Vol. 56 Issue 1/2, p119 

    Results are reported from studies performed to help master a new technology for obtaining rolled products of strength class 570 on the 2000 hot-rolling mill at the Magnitogorsk Metallurgical Combine. An analysis is conducted to determine how the formation of the properties of the rolled product...

  • Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures. Karmakar, Anish; Sivaprasad, S.; Kundu, S.; Chakrabarti, Debalay // Metallurgical & Materials Transactions. Part A;Apr2014, Vol. 45 Issue 4, p1659 

    Ferrite-carbide and ferrite-martensite dual-phase microstructures have been produced in a low-carbon steel with different ferrite grain structures such as, uniform distribution of coarse- and very fine-ferrite grains, and bimodal distribution of ferrite grain sizes comprising of coarse grains...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics