TITLE

GEL TAPE CASTING ceramic sheets

AUTHOR(S)
Zhipeng Xie; Chunlei Ma; Yong Huang; Junhui Xiang
PUB. DATE
October 2002
SOURCE
American Ceramic Society Bulletin;Oct2002, Vol. 81 Issue 10, p33
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Examines the tape casting technique used for fabrication of ceramic-based substrates structures. Materials and procedures of tape-casting; Details about the gel-tape-casting mechanism; Effects of dispersant in the system.
ACCESSION #
7491579

 

Related Articles

  • Robocasting provides moldless fabrication from slurry deposition. Cesarano III, Joseph; Segalman, Rachel; Calvert, Paul // Ceramic Industry;Apr98, Vol. 148 Issue 4, p94 

    Focuses on robocasting, a freeform fabrication and its application in ceramic manufacturing. Information on the computer-aided manufacturing of laminated engineering materials; Development of a modified stereolithographic techniques; Details on a technique being developed at Sandia National...

  • Obtenção e caracterização de espumas de cimento de fosfato de cálcio: avaliação dos métodos de emulsão e gelcasting. de Sousa, E.; Motisuke, M.; Bertran, C. A. // Ceramica;out-dez2012, Vol. 58 Issue 348, p500 

    The article presents the study on the characterization and fabrication of calcium phosphate cement (CPC) foams and several processing techniques in producing ceramics scaffolds.

  • Fabrication of CdO�Bi2O3 Ceramics. Ristich, M.; Brankovich, G.; Srechkovich, T.; Vlasova, M.; Kakazei, M.; Domingez-Pati�o, M. L.; Domingez-Pati�o, G. F.; Timofeeva, I. I.; Isaeva, L. P. // Inorganic Materials;Sep2003, Vol. 39 Issue 9, p988 

    The phase formation in the CdO-rich part (=10 wt % Bi2O3) of the CdO�Bi2O3 system was studied by x-ray diffraction, IR spectroscopy, electron microscopy, and other techniques. The results indicate that the grinding of the starting powder mixtures in a planetary mill leads to an...

  • Na0.25Cu0.75VO3: A New Perovskite-like Vanadium Bronze. Volkov, V. L.; Kadyrova, N. I.; Zakharova, G. S.; Zainulin, Yu. G.; D'yachkova, T. V.; Tyutyunnik, A. P.; Zubkov, V. G. // Inorganic Materials;Feb2004, Vol. 40 Issue 2, p184 

    A new cubic perovskite-like vanadium bronze of composition Na0.25Cu0.75VO3 , with a lattice parameter of 7.2517(1) Å, is obtained by reacting NaVO3 , V2O5 , and Cu2O at 1100°C and 8 GPa. It exhibits metallic conduction, with a sharp change in resistivity above 200°C, and, presumably,...

  • Macroporous hydroxyapatite bioceramics by solid freeform fabrication: towards custom implants. Richter, P.W.; Thomas, M.E.; van Deventer, T. // South African Journal of Science;Aug99, Vol. 95 Issue 8, p325 

    Solid freeform fabrication is a recent technology by which prototype devices can be manufactured layer by layer under computer control. This allows the production not only of individual devices of complex shape, but also objects with an internal structure that would be impossible to make by...

  • Fabrication and Microstructures of YAG Transparent Ceramics. Liu, M.; Wang, S. W.; Tang, D. Y.; Chen, L. D.; Ma, J. // Science of Sintering;Oct2008, Vol. 40 Issue 3, p311 

    YAG transparent ceramics with different microstructures were fabricated via solid-state reaction of high-purity powders. Influences of grain size, grain-boundary phases on the transmittance of the fabricated YAG ceramics were experimentally investigated. Our results confirm that the optical...

  • Highly textured bismuth-containing high-temperature superconductor ceramics obtained by uniaxial pressing in liquid medium: Fabrication and properties. Petrov, M. I.; Balaev, D. A.; Belozerova, I. L.; Vasil'ev, A. D.; Gokhfel'd, D. M.; Mart'yanov, O. N.; Popkov, S. I.; Shaihutdinov, K. A. // Technical Physics Letters;Sep2007, Vol. 33 Issue 9, p740 

    A new method of fabricating textured ceramics with a composition of Bi1.8Pb0.3Sr1.9Ca2Cu3Ox is described, according to which the initial low-density ceramics is subjected to uniaxial pressing in a liquid medium followed by drying and annealing. Analysis of the X-ray diffraction and scanning...

  • Mathematical model for calculating the heating of glass-kremnezit material. Puzach, V. G.; Puzach, S. V.; Shelkov, E. M.; Zabolotnikov, G. M. // Glass & Ceramics;May2007, Vol. 64 Issue 5/6, p177 

    A technology and a facility for cost-effective fabrication of glass-kremnezit based on modular production methods have been developed. A mathematical model is proposed for calculating heat transfer. This model makes it possible to determine the required thicknesses of the thermal insulation for...

  • Development of Mechanics in Support of Rocket Technology in Ukraine. Prisnyakov, V. F. // International Applied Mechanics;Jun2003, Vol. 39 Issue 6, p656 

    The paper analyzes the advances of mechanics made in Ukraine in resolving various problems of space and rocket technology such as dynamics and strength of rockets and rocket engines, rockets of different purpose, electric rocket engines, and nonstationary processes in various systems of rockets...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics