TITLE

Effect of low additives of calcium on corrosion resistance of alloys of the Mg - Al - Zn - Mn system

AUTHOR(S)
Koltygin, A.; Bazlova, T.
PUB. DATE
March 2012
SOURCE
Metal Science & Heat Treatment;Mar2012, Vol. 53 Issue 11/12, p584
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The effect of calcium (0.2 - 0.5 wt.%) on the resistance of a liquid and solid magnesium alloy to oxidation is investigated. It is shown that calcium may be used as a microalloying additive raising the corrosion resistance of magnesium alloys not only at a high temperature but also at the operating temperature of parts produced from them for both cast and heat treated conditions.
ACCESSION #
74466635

 

Related Articles

  • Influences of Current Density on the Structure and Corrosion Resistance of Ceramic Coatings on ZK60 Mg Alloy by Plasma Electrolytic Oxidation. Zhaozhong Qiu; Rui Wang; Xiaohong Wu; Yushen Zhang // International Journal of Electrochemical Science;Feb2013, Vol. 8 Issue 2, p1957 

    Current density was a key factor of plasma electrolytic oxidation (PEO) process. It influenced the composition, morphology and corrosion resistance of ceramic coatings on ZK60 Mg alloy by plasma electrolytic oxidation in Na2SiO3 solution. The microstructure and composition of coatings were...

  • YSZ-reinforced Mg-based amorphous composites: Processing, Characterisation & Corrosion. Yongsheng WANG; Ming Jen TAN; Beng Wah CHUA; Emin, Bayraktar // Advanced Materials Research;2014, Issue 939, p122 

    MgZnCa amorphous matrix-based composites whereby reinforcing the matrix with suitable reinforcements to achieve enhanced mechanical, biomedical and anti-corrosion properties have been studied here. Here, MgZnCa-based composites have been developed with different amounts (0-25%wt) of...

  • THE INFLUENCE OF ANODIZED FILM ON CORROSION BEHAVIOR OF MAGNESIUM ALLOYS. LIQUN BAI; MIN GUO; DI LI; JIANGANG QIAN; BAOLAN GUO // International Journal of Modern Physics B: Condensed Matter Phys;10/30/2006, Vol. 20 Issue 25-27, p3674 

    The influence of anodized film on corrosion and electrochemical behavior of extruded magnesium alloy AZ63, cast and die-cast magnesium alloys AZ91D were investigated by using immersion technique, electrochemical methods, SEM, EDAX, IR and XRD. The results showed anodized film could improve...

  • High-Performance Magnesium. Jeal, Nicholas // Advanced Materials & Processes;Sep2005, Vol. 163 Issue 9, p65 

    Focuses on high-performance magnesium called the Elektron 21. Abundance in sea water; Chemistry; Castability; Corrosion resistance; Aerospace applications. INSET: Elektron 21 was designed to improve on the collective . . ..

  • The Comparison of the Microstructure and Corrosion Resistance of Sand Cast Aluminum Alloys. Dobkowska, A.; Adamczyk - Cieślak, B.; Mizera, J.; Kurzydłowski, K. J.; Kiełbus, A. // Archives of Metallurgy & Materials;Mar2016, Vol. 61 Issue 1, p209 

    The influence of different types of precipitation on the corrosion behavior was investigated in three aluminum-siliconmagnesium alloys. The microstructures of the alloys were studied through optical (OM) and scanning electron microscopy (SEM). The structures consisted of an α-Al solid...

  • Passivity and Corrosion of Cu� xZn ( x = 10�40 wt%) Alloys in Borate Buffer Containing Chloride Ions. Mikic, T.; Milo�ev, I.; Pihlar, B. // Journal of Applied Electrochemistry;Oct2005, Vol. 35 Issue 10, p975 

    The electrochemical behaviour of Cu� xZn alloys and of Cu and Zn metals was studied by cyclic voltammetry and chronopotentiometry in borate buffer, pH = 9.2, with and without the addition of chloride ions in the range from 0.01 m to 1 m. In general, the shape of voltammograms of four...

  • Investigation of Wear and Corrosion Protection of AlSi20 Coatings Produced by Plasma Spraying and Laser Cladding on AZ31B. Bobzin, Kirsten; Kopp, Nils; Warda, Thomas; Schulz, Christiane; Rolink, Gesa; Weisheit, Andreas // Journal of Thermal Spray Technology;Mar2013, Vol. 22 Issue 2/3, p207 

    Magnesium and magnesium alloys are the lightest structural materials with an approximate density of 1.7 g/cm (density of aluminum ~2.7 g/cm). Due to poor corrosion and wear resistance properties, they need to be coated for usage in service conditions under corrosive and tribological loads....

  • Corrosion resistance of MA5 magnesium alloy with electric-arc coatings. Chervins'ka, N. R. // Materials Science;Jul2009, Vol. 45 Issue 4, p605 

    We study the possibilities of increasing the corrosion resistance of MA5 magnesium alloy by applying aluminum electric-arc coatings from D16 and AMg6 solid wires, a mixture of wires of different kinds (D16 + AMg6), and a powder wire in an aluminum sheath with B4 C + Ni Cr B Si mixture. The...

  • Corrosion Resistance of Magnesium Alloy (AZ31E) as Orthopaedic Biomaterials in Sodium Chloride Containing Antioxidantly Active Compounds from Eichhornia crassipes. Shanab, S. M. M.; Ameer, M. A.; Fekry, A. M.; Ghoneim, A. A.; Shalaby, E. A. // International Journal of Electrochemical Science;Jul2011, Vol. 6, p3017 

    Eichhornia crassipes (Water hyacinth) is a hydrophyte which invaded all Egyptian water bodies causing serious problems of navigation and water quality deterioration. Known weight of the sample was successively extracted with hexane (E1), ethyl acetate (E2) and methanol (E3). Antioxidant activity...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics