TITLE

Distribution of stresses near V-shaped notches in the complex stressed state

AUTHOR(S)
Savruk, M.; Kazberuk, A.
PUB. DATE
January 2012
SOURCE
Materials Science;Jan2012, Vol. 47 Issue 4, p476
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
By the method of singular integral equations, we obtain the solution of a two-dimensional problem of the elasticity theory for a plane containing a semiinfinite rounded V-notch under complex loading. On the basis on this solution, we establish the relationships between the stress intensity factors at the tip of the sharp V-notch and the maximum stresses and their gradients at the tip of the corresponding rounded notch. For finite bodies with V-notches, the presented solutions are obtained as asymptotic dependences for small radii of rounding of the tips. The deduced relationships can be used to perform the limit transitions and find the stress intensity factors at the tips of sharp V-notches on the basis of the solutions obtained for the corresponding rounded stress concentrators. The efficiency of the method is illustrated for the problem of determination of the stress intensity factors at the vertices of a rectangular hole in the elastic plane.
ACCESSION #
73983066

 

Related Articles

  • Distribution of stresses over the contour of a rounded V-shaped notch under antiplane deformation. Savruk, M.; Kazberuk, A.; Tarasyuk, G. // Materials Science;May2012, Vol. 47 Issue 6, p717 

    The solution of the antiplane problem of the theory of elasticity for a plane with semiinfinite rounded V-shaped notch is obtained by the method of singular integral equations. On this basis, we deduce the relationships between the stress concentration and stress intensity factors for sharp and...

  • Critical applied stresses for a crack initiation from a sharp V-notch. Náhlík, L.; Hutař, P.; Štegnerová, K. // Frattura e Integrita Strutturale;2014, Vol. 8, p55 

    The aim of the paper is to estimate a value of the critical applied stress for a crack initiation from a sharp V-notch tip. The classical approach of the linear elastic fracture mechanics (LELM) was generalized, because the stress singularity exponent differs from 0.5 in the studied case. The...

  • Anti-plane stress state of a plate with a V-notch for a new class of elastic solids. Kulvait, Vojtěch; Málek, Josef; Rajagopal, K. // International Journal of Fracture;Jan2013, Vol. 179 Issue 1/2, p59 

    The main purpose of this study is to investigate the efficacy and usefulness of a class of recently proposed models that could be reasonable candidates for describing the response of brittle elastic materials. The class of models that are considered allows for a non-linear relationship between...

  • Antisymmetric stress distribution in an elastic body with a sharp or a rounded V-shaped notch. Savruk, M.; Kazberuk, A. // Materials Science;Sep2011, Vol. 46 Issue 6, p711 

    Using the method of singular integral equations, we have obtained a solution of the plane problem of the theory of elasticity for a plane with a semiinfinite rounded V-shaped notch under antisymmetric loading. On this basis, we have determined relations between the stress intensity factor at the...

  • Some Expressions for the Strain Energy in a Finite Volume Surrounding the Root of Blunt V-notches. Lazzarin, P.; Berto, F. // International Journal of Fracture;Sep2005, Vol. 135 Issue 1-4, p161 

    The paper gives some closed form expressions for the strain energy averaged in a finite size volume surrounding the root of blunt V-shaped notches under Mode I loading. The control volume, reminiscent of Neuber’s concept of elementary structural volumes, is thought of as dependent on the...

  • On the use of the Theory of Critical Distances to estimate the dynamic strength of notched 6063-T5 aluminium alloy. Yin, T.; Tyas, A.; Plekhov, O.; Terekhina, A.; Susmel, L. // Frattura e Integrita Strutturale;2014, Vol. 8, p220 

    In this paper the so-called Theory of Critical Distances is reformulated to make it suitable for estimating the strength of notched metals subjected to dynamic loading. The TCD takes as its starting point the assumption that engineering materials' strength can accurately be predicted by directly...

  • Recent developments in multi-parametric three-dimensional stress field representation in plates weakened by cracks and notches. Lazzarin, P.; Zappalorto, M.; Berto, F. // Frattura e Integrita Strutturale;2013, Issue 25, p61 

    The paper deals with the three-dimensional nature and the multi-parametric representation of the stress field ahead of cracks and notches of different shape. Finite thickness plates are considered, under different loading conditions. Under certain hypotheses, the three-dimensional governing...

  • An Update on the Fracture Toughness Testing Methods Related to the Cracked Chevron-notched Brazilian Disk (CCNBD) Specimen. Fowell, R.; Xu, C.; Dowd, P. // Pure & Applied Geophysics;May2006, Vol. 163 Issue 5/6, p1047 

    This paper reviews the use of the cracked Chevron-notched Brazilian disc (CCNBD) for fracture toughness testing. Theoretical and experimental backgrounds of the method are described. Some issues regarding the current development (i.e., recalibration) of the specimen geometry are presented and...

  • Stress Concentration Near Sharp and Rounded V-Notches. Panasyuk, V.; Savruk, M.; Kazberuk, A. // Materials Science;May2014, Vol. 49 Issue 6, p711 

    We present a survey of investigations of the stress concentration in elastic bodies weakened by sharp and rounded V-notches. Special attention is given to the unified approach to the study of stress distributions near the indicated stress concentrators in the case where the stress intensity...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics