TITLE

ELECTROCOAT CLINIC

PUB. DATE
March 2012
SOURCE
Products Finishing;Mar2012, Vol. 76 Issue 6, p44
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
The article presents questions and answers related to electrocoat such as the use of electrocoat for coating magnesium and copper substrates and ways for measuring electrocoat cure.
ACCESSION #
73366525

 

Related Articles

  • PVD Coating of Mg-AZ31 by Thin Layer of Al and Al-Si. Taha, Mohamed; El-Mahallawy, Nahed; Hammouda, Rawia; Nassef, Sherif // Journal of Coatings Technology & Research;Nov2010, Vol. 7 Issue 6, p793 

    Although magnesium alloys have the advantage of high specific strength, they have poor atmospheric corrosion resistance. An important method of improving the corrosion resistance is by applying a coating layer. In this work, the physical vapor deposition (PVD) technique is used for coating a...

  • Case Study of Low-Pressure Cold Spray Conductive Coating. Wilmot, Damian; Howe, Christopher D.; Todorovic, Ranko; Hoiland, Benjamin // Advanced Materials & Processes;Nov/Dec2010, Vol. 168 Issue 11, p62 

    The article presents a reprint of the article "Case Study of Low-Pressure Cold Spray Conductive Coating," by Damian Wilmot and colleagues, which appeared in the 2010 issue of "AMMTIAC Quarterly." It states that cold spray is a coating method that employs heated supersonic velocity gas stream to...

  • Editorial. Marple, Basil; Agarwal, Arvind; Hyland, Margaret; Lau, Yuk-Chiu; Li, Chang-Jiu; Lima, Rogerio; McDonald, André // Journal of Thermal Spray Technology;May2012, Vol. 21 Issue 3/4, p361 

    An introduction is presented in which the guest editors discuss various reports within the issue on topics including cold spraying, coating deposition, and coating characterization and performance.

  • Functionally graded bioactive glass coating on magnesia partially stabilized zirconia (Mg-PSZ) for enhanced biocompatibility. Rahaman, Mohamed; Li, Yadong; Bal, B. S.; Huang, Wenhai // Journal of Materials Science: Materials in Medicine;Jun2008, Vol. 19 Issue 6, p2325 

    The coating of magnesia partially stabilized zirconia (Mg-PSZ) with a bioactive glass was investigated for enhancing the bioactivity and bone-bonding ability of Mg-PSZ orthopedic implants. Individual coatings of three different bioactive glasses were prepared by depositing a concentrated...

  • Knight's knowledge. Knight, Jack // CanTech International;Mar2012, Vol. 19 Issue 6, p25 

    The article offers the author's insights regarding tinplate printing. He says that Coefficient Of Friction (COF), the ratio of the weight of the object and the force maintaining contact between the surface and the object, determines how ink will stick to the metal substrate surface. He mentions...

  • Coating Matters ∣ The Wizard Behind the Curtain. Hine, Claudia // Paper, Film & Foil Converter; 

    The article focuses on the concept of curtain coating which air is displaced to a substrate by using fluids. It states that the process is based on two concepts including physics and fluid dynamics. It further discusses importance of edge guides while adding slot die at the time of dropping...

  • Determination of Average Coating Removal Efficiency for Nd: YAG Laser over Three Types of Car Coated Substrate. Azhar Abdul Razab, Mohammad Khairul; Suhaimi Jaafar, Mohamad; Rahman, Azhar Abdul; Affandi Saidi, Syahrul // Advances in Environmental Biology;Jan2014, Vol. 8 Issue 1, p227 

    A technique to determine the average coating removal efficiency of Cynosure Cynergy Pulse Nd:YAG laser in paint removal has been developed on national and imported car coated substrates. This paper reports on the results of studies carried out on three types of different coating thicknesses...

  • Micromechanical and structural properties of nickel coatings electrodeposited on two different substrates. Lamovec, Jelena; Jović, Vesna; Aleksić, Radoslav; Radojević, Vesna // Journal of the Serbian Chemical Society;Jul2009, Vol. 74 Issue 7, p817 

    Fine-structured nickel coatings were electrodeposited from a sulfamate-based electrolyte onto different substrates: polycrystalline cold-rolled copper and single crystal silicon with (111) orientation. The influence of the substrate layers and chosen plating conditions on the mechanical and...

  • Two-layer nonreflective absorber of electromagnetic radiation. Kasimov, R.; Kasimova, S. // Journal of Engineering Physics & Thermophysics;May2009, Vol. 82 Issue 3, p604 

    Conditions for reflectionless quenching of electromagnetic radiation in the layer of absorbing dielectric applied to a nonabsorptive quarter-wave substrate have been found. These conditions as functions of the layer thickness and the dielectric properties of the coating and the substrate are...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics