TITLE

TURNING PARAMETER OPTIMIZATION FOR SURFACE ROUGHNESS OF ASTM A242 TYPE-1 ALLOYS STEEL BY TAGUCHI METHOD

AUTHOR(S)
Verma, Jitendra; Agrawal, Pankaj; Bajpai, Lokesh
PUB. DATE
March 2012
SOURCE
International Journal of Advances in Engineering & Technology;Mar2012, Vol. 3 Issue 1, p255
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The purpose of this research paper is focused on the analysis of optimum cutting conditions to get lowest surface roughness in turning ASTM A242 Type-1 ALLOYS STEEL by Taguchi method. Experiment was designed using Taguchi method and 9 experiments were conducted by this process. The results are analyzed using analysis of variance (ANOVA) method. Taguchi method has shown that the cutting speed has significant role to play in producing lower surface roughness about 57.47% followed by feed rate about 16.27%. The Depth of Cut has lesser role on surface roughness from the tests. The results obtained by this method will be useful to other researches for similar type of study and may be eye opening for further research on tool vibrations, cutting forces etc.
ACCESSION #
73179318

 

Related Articles

  • Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions. Eker, Beril; Ekici, Bülent; Kurt, Mustafa; Bakır, Barkın // Mechanika;2014, Vol. 20 Issue 3, p310 

    In this study, MQL turning performance was compared to dry conditions. The magnesium based material will be formed by applying the orthogonal cutting. The CNC Lathe shall be used for both cutting processes. The experiment used MINITAB 16 software to establish the experiment plan. In this study,...

  • ANALYSIS OF SURFACE ROUGHNESS IN HARD TURNING BY USING TAGUCHI METHOD. SALVI, S. B.; DESHMUKH, R. R.; DESHMUKH, S. D. // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p365 

    Hard turning is defined as the turning of hardened ferrous metals with Rockwell-C hardness ratings ranging from 45 to 70. Hard turning has the potential to reduce production costs by replacing more costly and less agile grinding operations on hard materials especially in finishing processes...

  • FORECASTING OF OPTIMUM TURNING PARAMETER ON SURFACE ROUGHNESS IN TURNING OF AL-AL2O3 METAL MATRIX COMPOSITE. SINGH, YASHVIR; SINGH, NISHANT KUMAR; SINGLA, AMNEESH; LOHANI, NITIN // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p267 

    The objective of this research work is to apply taguchi method to investigate the effects of turning parameters such as cutting speed, depth of cut and feed rate on surface roughness, in Turning of Al-Al2O3 MMC using TiC coated HSS cutting tool. The Signal-to- Noise (S/N) ratio, the analysis of...

  • Application of Taguchi Method Machining to CuA1. Ibrahim, M. R.; Abdullah, Aznizam; Kadir, A.R Ab; Sulaiman, S. // Applied Mechanics & Materials;2015, Vol. 789-790, p111 

    This paper is to study the application of Taguchi Method when experimental cutting on Copper (CuA1) generated by a milling machine. The respone of this study is surface roughness while machining with varying machining parameters such as cutting speed, feed rate and depth of cut. This experiment...

  • Optimization of Cutting Parameters to Minimize the Surface Roughness in the End Milling Process Using the Taguchi Method. Ribeiro, João; Lopes, Hernâni; Queijo, Luis; Figueiredo, Daniel // Periodica Polytechnica: Mechanical Engineering;2017, Vol. 61 Issue 1, p30 

    This paper presents a study of the Taguchi design application to optimize surface quality in a CNC end milling operation. The present study includes feed per tooth, cutting speed and radial depth of cut as control factors. An orthogonal array of L9 was used and the ANOVA analyses were carried...

  • Statistical analysis of process parameters in drilling of AL/SIC metal matrix composite. Tosun, Gül // International Journal of Advanced Manufacturing Technology;Jul2011, Vol. 55 Issue 5-8, p477 

    This paper presents a statistical analysis of process parameters for surface roughness in drilling of Al/SiCp metal matrix composite. The experimental studies were conducted under varying spindle speed, feed rate, drill type, point angle of drill, and heat treatment. The settings of drilling...

  • Multi-response optimization of machining parameters in hot turning using grey analysis. Ranganathan, S.; Senthilvelan, T. // International Journal of Advanced Manufacturing Technology;Sep2011, Vol. 56 Issue 5-8, p455 

    This paper envisages the multi-response optimization of machining parameters in hot turning of stainless steel (type 316) based on Taguchi technique. The workpiece heated with liquid petroleum gas flame burned with oxygen was machined under different parameters, i.e., cutting speed, feed rate,...

  • Surface Roughness Optimization of Brass Reinforced Epoxy Composite Using CNC Milling Process. Ahmadi, Naeim E.; Gohari, Ali; Zare, Ali // Australian Journal of Basic & Applied Sciences;Jun2014, Vol. 8 Issue 9, p195 

    This paper attempts to optimize the effect of cutting parameters on surface roughness of brass reinforced epoxy composite in CNC milling process. Practically, in milling operation, cutting parameters such as feedrate, spindle speed and depth of cut have greater effect on surface roughness. In...

  • The Effect of Surface Roughness of End-Mills on Optimal Cutting Performance for High-Speed Machining. Chi-Hsiang Chen; Yung-Cheng Wang; Bean-Yin Lee // Strojniski Vestnik / Journal of Mechanical Engineering;2012, Vol. 59 Issue 2, p124 

    In this study, the effect of surface roughness of end-mills on the cutting performance of high-speed machining has been investigated. A novel optimization design approach of the processing parameters for the high-speed cutting of the DIN 1.2344 tool steel has been also proposed. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics