TITLE

Gun Switch Cuts Maintenance Costs

AUTHOR(S)
Buhler, Bruce
PUB. DATE
March 2002
SOURCE
Gases & Welding Distributor;Mar/Apr2002, Vol. 46 Issue 2, p53
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Discusses the benefits of using gas-metal-arc welding guns. Decrease in consumable costs and repair part costs; Increase production rates without sacrificing weld quality; Implementation of continuous flow manufacturing; Basic low-carbon steel welding.
ACCESSION #
7254108

 

Related Articles

  • WELDING ALUMINUM ALLOY INVESTIGATIONS WITH EDDY-CURRENT DEFECTOSCOPY METHOD. CONSTANTIN, DUMITRACHE; MIHAELA, BARHALESCU; ADRIAN, SABAU // Journal of Marine Technology & Environment;2012, Vol. 1, p43 

    The purpose of this paper is to make investigations at aluminum alloy welded structures in condition of normal welding (TIG-tungsten inert gas welding), and the same procedure but arc-weld is disrupting and makes void spaces into the weld bead. It is very known that aluminum reacts with oxygen...

  • Investigation of Hot Cracking Behavior in Transverse Mechanically Arc Oscillated Autogenous AA2014 T6 TIG Welds. Biradar, N.; Raman, R. // Metallurgical & Materials Transactions. Part A;Sep2012, Vol. 43 Issue 9, p3179 

    Hot cracking studies on autogenous AA2014 T6 TIG welds were carried out. Significant cracking was observed during linear and circular welding test (CWT) on 4-mm-thick plates. Weld metal grain structure and amount of liquid distribution during the terminal stages of solidification were the key...

  • THE IMPACT OF WELDING WIRE ON THE MECHANICAL PROPERTIES OF WELDED JOINTS. Mazur, Magdalena; Ulewicz, Robert; Bokůvka, Otakar // Materials Engineering / Materialove Inzinierstvo;2014, Vol. 21 Issue 3, p122 

    This paper presents results of the mechanical properties of Hardox 450 steel welded joints. These welded joints were made in accordance with welding procedure specifications (WPS), which was prepared and applied in the Wielton company. Fillers were provided by welding wires with two different...

  • Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process. Kumar, Kamlesh; Ahirwar, Pankaj; Masanta, Manoj // Materials Science Forum;2017, Vol. 880, p21 

    In this study, AISI 1020 plate of 6 mm thickness has been welded by autogenous TIG welding process maintaining different root gap (0, 0.5, 0.75 and 1 mm). The weld bead profile and the tensile strength of the welded joint has been analysed. From the experimental results it is revealed that, for...

  • Influence of Parameters of Laser Beam Welding on Structure of 2205 Duplex Stainless Steel. Landowski, M. // Advances in Materials Science;Mar2019, Vol. 19 Issue 1, p21 

    Laser welding is used in modern industry, having many advantages comparing to traditional welding technologies. Nowadays, industry sectors such as shipbuilding, automotive and aviation can't be imagined without laser processing technologies. Possibility of increase of welded joint properties,...

  • Numerical prediction and experimental validation of temperature and residual stress distributions in buried‐arc welded thick plates. Perić, Mato; Garašić, Ivica; Tonković, Zdenko; Vuherer, Tomaž; Nižetić, Sandro; Dedić‐Jandrek, Hrvoje // International Journal of Energy Research;6/25/2019, Vol. 43 Issue 8, p3590 

    Summary: The paper deals with the numerical simulation and experimental investigations of a buried‐arc welding process on a butt‐welded plate sample. In the numerical investigations, the finite element analysis is carried out by applying the element birth and death technique in the...

  • The Influence of Different Gas Welding Flame on Corrosion Behavior of the Carbon steel's Heat Affected Zone in Seawater. Cai-xiang GU; Guang-wei LIU; Yu-dong XU // Advanced Materials Research;2015, Vol. 1120-1121, p1059 

    The influence of different flame of gas welding on corrosion behavior of the carbon steel's heat affected zone in seawater were studied by the weight-loss method, electroanalytical chemistry method and surface and microstructure observation. The result indicate that when gas welding the carbon...

  • Oxyfuel gouging removes defects, preps welds. Harris, Richard A. // Welding Design & Fabrication;Sep99, Vol. 72 Issue 9, p28 

    Discusses the use of oxyfuel gouging to remove weld defects, trim, shape and prep plate edges for welding in one operation in all positions for steel fabrication and repairs. Comparison with mechanical methods; Use of same equipment as for oxyfuel welding and cutting; Control of the depth of...

  • Tunneling microscopy, lithography, and surface diffusion on an easily prepared, atomically flat gold surface. Schneir, J.; Sonnenfeld, R.; Marti, O.; Hansma, P. K.; Demuth, J. E.; Hamers, R. J. // Journal of Applied Physics;2/1/1988, Vol. 63 Issue 3, p717 

    Focuses on a study which described that a gold surface with atomically flat terraces can be easily prepared in air by melting a gold wire with an oxyacetylene torch. Methodology; Results; Conclusions.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics