TITLE

MICRO AND NANO PARTICLES PRODUCED BY WATERJET ABRASION

AUTHOR(S)
Cabanillas, E. D.
PUB. DATE
January 2010
SOURCE
Acta Microscopica;2010, Vol. 19 Issue 1, p105
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The debris produced by a waterjet machining equipment was observed and analyzed by optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, backscattered electrons, and transmission electron microscopy. Micro and nano particles of different forms were found as result of the cutting process.
ACCESSION #
69583514

 

Related Articles

  • Immobilization of silver nanoparticles on silica microspheres. Chih-Kai Huang; Chia-Yin Chen; Jin-Lin Han; Chii-Chang Chen; Meng-Dan Jiang; Jen-Sung Hsu; Chia-Hua Chan; Kuo-Huang Hsieh // Journal of Nanoparticle Research;Jan2010, Vol. 12 Issue 1, p199 

    Abstract  The silver nanoparticles (Ag NPs) have been immobilized onto silica microspheres through the adsorption and subsequent reduction of Ag+ ions on the surfaces of the silica microspheres. The neat silica microspheres that acted as the core materials were prepared through...

  • LIPOSOMES CONTAINING UNDOPED AND Au+ / Ag+ DOPED TITANIUM DIOXIDE NANOPARTICLES. Hădărugă, D. I.; Hădărugă, N. G.; Lăzău, C.; Raţiu, C.; Crăciun, C.; Grozescu, I. // Digest Journal of Nanomaterials & Biostructures (DJNB);Oct2010, Vol. 5 Issue 4, p919 

    The paper presents the obtaining and characterization of liposomes containing undoped and metallic ions (Au+ and Ag+) doped titanium dioxide nanoparticles by using the ultrasonication method. Commercial "empty" liposomes and undoped and doped (with Au+ and Ag+ ions) titanium dioxide (obtained by...

  • Electromechanical properties of freestanding graphene functionalized with tin oxide (SnO2) nanoparticles. Dong, L.; Hansen, J.; Xu, P.; Ackerman, M. L.; Barber, S. D.; Schoelz, J. K.; Qi, D.; Thibado, P. M. // Applied Physics Letters;8/6/2012, Vol. 101 Issue 6, p061601 

    Freestanding graphene membranes were functionalized with SnO2 nanoparticles. A detailed procedure providing uniform coverage and chemical synthesis is presented. Elemental composition was determined using scanning electron microscopy combined with energy dispersive x-ray analysis. A technique...

  • STRUCTURAL AND OPTICAL CHARACTERIZATION OF GaSe NANOPARTICLES. Kyazym-Zade, A. G.; Salmanov, V. M.; Aliyev, I. M.; Aliyeva, A. M.; Salmanova, A. A. // Journal of Qafqaz University;2011, Issue 31, p50 

    GaSe nanoparticles have been successfully prepared with "Pulverisette" within 150 hours per a continuous operating mode. By means of energy dispersive X-ray spectroscopy (EDAX), X-rays diffraction analysis (XRD) and scanning electron microscope (SEM) researches structures and optical...

  • Electrochemical Response and Impedimetric Behaviour of Dopamine and Epinephrine at Platinum Electrode Modified with Carbon Nanotubes-Gold Nanocomposite. Adekunle, Abolanle S.; Ayenimo, Joseph G.; Xi-Ya Fang; Doherty, Winston O.; Arotiba, Omotayo A.; Mamba, Bhekie B. // International Journal of Electrochemical Science;Jul2011, Vol. 6, p2826 

    A Platinum (Pt) electrode was modified with gold and gold oxide nanoparticles electrodeposited on multi-walled carbon nanotubes. The modified electrodes were characterised with techniques such as Transmission Emission Microscopy (TEM), Scanning Electron Microscopy (SEM), and Energy Dispersive...

  • Synthesis and thermoelectric characterisation of bismuth nanoparticles. Gianfranco Carotenuto; Cornelia Hison; Filomena Capezzuto; Mariano Palomba; Pietro Perlo; Pellegrino Conte // Journal of Nanoparticle Research;Oct2009, Vol. 11 Issue 7, p1729 

    Abstract  An effective method of preparation of bismuth nanopowders by thermal decomposition of bismuth dodecyl-mercaptide Bi(SC12H25)3 and preliminary results on their thermoelectric properties are reported. The thermolysis process leads to Bi nanoparticles due to the efficient capping...

  • Biocorrosion studies of TiO2 nanoparticle-coated Ti–6Al–4V implant in simulated biofluids. Zaveri, Nikita; McEwen, Gerald D.; Karpagavalli, Ramji; Anhong Zhou // Journal of Nanoparticle Research;Jun2010, Vol. 12 Issue 5, p1609 

    The corrosion behaviors of the TiO2 nanoparticles coated bioimplant Ti–6Al–4V exposed to three different simulated biofluids (SBF), namely, (1) NaCl solution, (2) Hank’s solution, and (3) Cigada solution, were studied by using micro-Raman spectroscopy, electrochemical...

  • LCLD laser processing technology for microelectronics printed-circuit boards of new generation. Semenok, Dmitriy // Interdisciplinarity in Engineering;2014, Vol. 12, p277 

    This paper has dealt with the formation mechanism of nanosized metal coatings on dielectrics; the coatings were produced using laser-induced deposition from liquid phase. A diode-pumped solid-state (DPSS) laser (532 nm) was used in the deposition experiments. The laser power varied from 500 to...

  • Photocatalytic Degradation of Nitro and Chlorophenols Using Doped and Undoped Titanium Dioxide Nanoparticles. Ilyas, Hassan; Qazi, Ishtiaq A.; Asgar, Wasim; Ali Awan, M.; Khan, Zahir-ud-din // Journal of Nanomaterials;2011, p1 

    Pure and Ag-TiO2 nanoparticles were synthesized, with the metallic doping being done using the Liquid Impregnation (LI) method. The resulting nanoparticles were characterized by analytical methods such as scanning electron micrographs (SEMs), Energy Dispersive Spectroscopy (EDS), and X-ray...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics