TITLE

EFECTOS DE LA RECRISTALIZACIÓN INCOMPLETA EN ACEROS MICROALEADOS PARA HOJALATA

AUTHOR(S)
Strubbia, R.; Hereñú, S.; Alvarez, I.
PUB. DATE
January 2010
SOURCE
Acta Microscopica;2010, Vol. 19 Issue 1, p13
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The steels used for tinplate are microalloyed steels with low carbon content. Some of the applications for which tinplates are potentially considered are the manufacture of different types of containers for the food industries and ornaments. Due to the increasing cost of alloying elements, the search for processes to obtain different properties even in the same alloy is relevant. The study of the microstructural and mechanical properties enables a more effective control of the manufacturing process of the final rolled product. The objective of this work is to investigate the influence of temperature, chemical composition and microstructure on the mechanical properties of a cold rolled low carbon steel. It is of particular interest of this research to analyze the drawbacks resulting from incomplete recrystallization.
ACCESSION #
69583502

 

Related Articles

  • Fiber Texture and Substructural Features in the Caliber-Rolled Low-Carbon Steels. Yin, Fuxing; Hanamura, Toshihiro; Inoue, Tadanobu; Nagai, Kotobu // Metallurgical & Materials Transactions. Part A;Feb2004, Vol. 35 Issue 2, p665 

    Caliber rolling at the recrystallization temperatures of ferrite is a new process that was developed to fabricate an ultrafine-grained microstructure for low-carbon steels. In the present investigation, the electron backscattered diffraction (EBSD) measurement was carried out to characterize...

  • Hot Deformation Behavior and Dynamic Recrystallization of Medium Carbon LZ50 Steel. Du, Shiwen; Chen, Shuangmei; Song, Jianjun; Li, Yongtang // Metallurgical & Materials Transactions. Part A;Mar2017, Vol. 48 Issue 3, p1310 

    Hot deformation and dynamic recrystallization behaviors of a medium carbon steel LZ50 were systematically investigated in the temperature range from 1143 K to 1443 K (870 °C to 1170 °C) at strain rates from 0.05 to 3s using a Gleeble-3500 thermo-simulation machine. The flow stress...

  • Microstructure Evolution Characterization of Multi-pass Hot Rolling Simulation of Nb-Ti Microalloyed Steel. Bin Shen; Song-he Zhu; Heng-hua Zhang // Advanced Materials Research;2014, Vol. 936, p1141 

    In this study, a improved mathematical model was developed for Nb-Ti microalloyed steel during hot rolling simulation. Using the compression test, the dynamic and static recrystallization characteristics of Nb-Ti microalloyed steel were studied. Though multi-pass hot rolling simulation, it is...

  • Modeling the High Temperature Flow Behavior and Dynamic Recrystallization Kinetics of a Medium Carbon Microalloyed Steel. Ferdowsi, Mahmoud; Nakhaie, Davood; Benhangi, Pooya; Ebrahimi, Gholam // Journal of Materials Engineering & Performance;Mar2014, Vol. 23 Issue 3, p1077 

    In this study, the hot deformation behavior of a medium carbon microalloyed steel was investigated. The hot compression test was conducted in the temperature range of 1000-1200 °C under strain rates of 0.01, 0.1 and 1 s. It has been observed that the flow stress increases with a decrease in...

  • A study of the dynamic recrystallization kinetics of V-microalloyed medium carbon steel. Kim, K.; Park, J. // Journal of Materials Science;Sep2015, Vol. 50 Issue 18, p6142 

    The Avrami kinetics of the dynamic recrystallization (DRX) of V-microalloyed medium carbon steel is studied by measuring the flow curves and evolution of grain size distribution (GSD) due to DRX and by modeling the flow softening kinetics and flow curves under various deformation conditions. The...

  • Thermal Transients During Processing of 3003 Al-H18 Multilayer Build by Very High-Power Ultrasonic Additive Manufacturing. Sriraman, M.; Gonser, Matt; Foster, Daniel; Fujii, Hiromichi; Babu, S.; Bloss, Matt // Metallurgical & Materials Transactions. Part B;Feb2012, Vol. 43 Issue 1, p133 

    Previous investigations suggested a gradient in bond microstructure along the height of a 'build' made by very high power ultrasonic additive manufacturing-a rapid prototyping process that is based on ultrasonic seam welding. The bonding of foils is associated with the occurrence of dynamic...

  • Deformation Processing Maps for Control of Microstructure in Al-Cu-Mg Alloys Microalloyed with Sn. Banerjee, Sanjib; Robi, P.; Srinivasan, A. // Metallurgical & Materials Transactions. Part A;Oct2012, Vol. 43 Issue 10, p3834 

    High-temperature deformation behaviors of Al-5.9 pct Cu-0.5 pct Mg alloy and Al-5.9 pct Cu-0.5 pct Mg alloy containing 0.06 wt pct Sn were studied by hot compression tests conducted at different temperatures and strain rates. Trace content of Sn resulted in a significant increase of flow stress...

  • Investigation of Dynamic and Static Recrystallization Behavior During Thermomechanical Processing in a API-X70 Microalloyed Steel. Mirzakhani, Bahman; Salehi, Mohammad; Khoddam, Shahin; Seyedein, Seyed; Aboutalebi, Mohammad // Journal of Materials Engineering & Performance;Nov2009, Vol. 18 Issue 8, p1029 

    Recovery and recrystallization phenomena and effects of microalloying elements on these phenomena are of great importance in designing thermomechanical processes of microalloyed steels. Control of these phenomena can lead to manufacturing of products with suitable structures and desirable...

  • Effect of Composition and Deformation on Coarse-Grained Austenite Transformation in Nb-Mo Microalloyed Steels. Isasti, N.; Jorge-Badiola, D.; Taheri, M.; López, B.; Uranga, P. // Metallurgical & Materials Transactions. Part A;Dec2011, Vol. 42 Issue 12, p3729 

    Thermomechanical processing of microalloyed steels containing niobium can be performed to obtain deformed austenite prior to transformation. Accelerated cooling can be employed to refine the final microstructure and, consequently, to improve both strength and toughness. This general rule is...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics