TITLE

EFFECT OF LATTICE DEFECTS ON SHAPE MEMORY PROPERTIES OF Fe-Mn-Si ALLOYS

AUTHOR(S)
Druker, A.; Baruj, A.; Malarría, J.
PUB. DATE
January 2010
SOURCE
Acta Microscopica;2010, Vol. 19 Issue 1, p9
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We have investigated two shape memory ferrous alloys, Fe-30Mn-4Si and Fe-15Mn-4Si-9Cr-5Ni, processed by different thermo-mechanical ways, in order to analyze the effect of processing conditions and the stacking fault energy values on their shape memory properties. Rolling was conducted at 20, 600-800 and 1000ºC, and afterwards the sheets were annealed between 650 and 1000ºC. The density and structure of dislocations, as well as the presence of stacking faults, strongly depend on the process temperatures. Among the investigated cases, the alloy containing 15% Mn, rolled at 800°C and annealed at 650°C, the recovery temperature, shows the best shape memory behavior.
ACCESSION #
69583501

 

Related Articles

  • Microstructures and magnetostriction of two-phase Fe66-Pd30-Ni4 high-temperature ferromagnetic shape memory alloys. Lin, Yin-Chih; Lin, Chien-Feng; Yang, Jin-Bin; Lee, Hwa-Teng // Journal of Applied Physics;Apr2011, Vol. 109 Issue 7, p07A912 

    The microstructures and magnetostrictive strains of ferromagnetic shape memory Fe-Pd30 alloy systems with additions of Ni elements (4 at.%) have been investigated by a magnetostriction meter, scanning electron microscopy (SEM), x-ray diffraction (XRD), and transmission electron microscopy (TEM)....

  • Novel High-Speed High Pressure Torsion Technology for Obtaining Fe-Mn-Si-Cr Shape Memory Alloy Active Elements. Gurău, Gheorghe; Gurău, Carmela; Potecaşu, Octavian; Alexandru, Petrică; Bujoreanu, Leandru-Gheorghe // Journal of Materials Engineering & Performance;Jul2014, Vol. 23 Issue 7, p2396 

    This paper introduces an adapted high-speed high pressure torsion (HS-HPT) method of severe plastic deformation applied for obtaining shape memory alloy (SMA) active elements with revolution symmetry, able to develop axial displacement/force. Billets with circular crown forms were cut from...

  • Theoretical study on the dislocation structure of parent-martensite interface in a magnetic shape memory alloy. Ma, X.; Wei, Z.; Zhang, X. // Journal of Materials Science;Jul2014, Vol. 49 Issue 13, p4648 

    Ferromagnetic shape memory alloys have received increasing interest and have great potential for actuator and sensor applications, the mobility of the parent-martensite interphase interface in such alloys is determined by its interfacial structure and the migration mechanism; therefore, a...

  • Properties of Co-alloyed Ni-Fe-Ga Ferromagnetic Shape Memory Alloys. Chernenko, V. A.; Oikawa, K.; Chmielus, M.; Besseghini, S.; Villa, E.; Albertini, F.; Righi, L.; Paoluzi, A.; Müllner, P.; Kainuma, R.; Ishida, K. // Journal of Materials Engineering & Performance;Oct2009, Vol. 18 Issue 5/6, p548 

    It is experimentally found that in the Ni54Fe20- xCo xGa26 ferromagnetic shape memory alloys, Co variation from 0 to 9 at.% leads to: (i) almost linear change of martensitic transformation temperatures from −70 °C to 120 °C; (ii) a non-monotonous change of the Curie temperature, and...

  • Effect of Manganese on Microstructures and Solidification Modes of Cast Fe-Mn-Si-Cr-Ni Shape Memory Alloys. Peng, Huabei; Wen, Yuhua; Du, Yangyang; Yu, Qinxu; Yang, Qin // Metallurgical & Materials Transactions. Part B;Oct2013, Vol. 44 Issue 5, p1137 

    We investigated microstructures and solidification modes of cast Fe-(13-27)Mn-5.5Si-8.5Cr-5Ni shape memory alloys to clarify whether Mn was an austenite former during solidification. Furthermore, we examined whether the Cr/Ni equations (Delong, Hull, Hammer and WRC-1992 equations) and...

  • Texture characteristics controlled by single slip plane slipping in the warm-rolled Fe-14Mn-5Si-9Cr-5Ni shape memory alloy. Li, H.; Yin, F.; Sawaguchi, T.; Zhao, X.; Tsuzaki, K. // Journal of Materials Research;Jun2009, Vol. 24 Issue 6, p25 

    The article focuses on the results of a study on the effect of a single slip plane slipping on the rolling texture of the shape memory alloy, Fe-14Mn-5Si9Cr-5Ni. The research found that the rolling texture from such alloy is not similar to that of conventional copper-type and brass-type. The...

  • Effect of Deflection Rate on Bending Deformation Behavior of Fe-based Shape Memory Alloy. Keizo NISHIKORI; Takeshi IWAMOTO // Applied Mechanics & Materials;2014, Issue 566, p116 

    In this study, three-point bending test is conducted at various deformation rate by using a thin plate of Fe-based alloy. The rate sensitivity of its bending deformation during loading and shape memory effect by heating after unloading are investigated experimentally. The results obtained are...

  • Effect of NbC and TiC precipitation on shape memory in an iron-based alloy. Stanford, N.; Dunne, D. // Journal of Materials Science;Aug2006, Vol. 41 Issue 15, p4883 

    This paper examines the effects of TiC and NbC precipitation and prior cold rolling on the shape memory behaviour of an iron-based alloy. A precipitate-free alloy was used as a reference to investigate the relative contributions of prior-deformation and precipitation on shape memory. Heat...

  • Optimization of Shape-Memory Effect in Fe-Mn-Si-Cr-Re Shape-Memory Alloys. Lin, Kun-Ming; Chen, Jian-Hung; Lin, Chen-Chih; Liu, Cheng-Hsien; Lin, Hsin-Chih // Journal of Materials Engineering & Performance;Jul2014, Vol. 23 Issue 7, p2327 

    Fe-Mn-Si-Cr-based shape-memory alloys have excellent properties of formability, shape-memory effect, and low cost. These properties make Fe-Mn-Si-Cr SMAs ideal candidates for the application of pipe coupling and fish plates. In this study, we add slight Rhenium (Re, 0.05-0.3 wt.%) to...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics