TITLE

Fabrication of frequency-selective surfaces using microlens projection photolithography

AUTHOR(S)
Wu, Ming-Hsien; Paul, Kateri E.; Yang, Jerry; Whitesides, George M.
PUB. DATE
May 2002
SOURCE
Applied Physics Letters;5/13/2002, Vol. 80 Issue 19, p3500
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This letter describes the use of microlens projection photolithography (μLPL) for the fabrication of repetitive metallic micropatterns, and the application of these patterns as frequency-selective surfaces. Microlens projection photolithography uses an array of microlenses (diameter d=1–1000 micrometers) to project an array of images of an illuminated mask into photoresist. We converted these arrays into patterns in metals by electron beam evaporation and lift off. This technique can produce arrays over areas >10 cm[sup 2] with submicrometer feature sizes in a single exposure. We fabricated arrays of metallic micropatterns on substrates transparent to infrared radiation, and demonstrated that appropriate patterns acted as frequency-selective filters. © 2002 American Institute of Physics.
ACCESSION #
6630288

 

Related Articles

  • Maskless photolithography: Embossed photoresist as its own optical element. Paul, Kateri E.; Breen, Tricia L.; Aizenberg, Joanna; Whitesides, George M. // Applied Physics Letters;11/16/1998, Vol. 73 Issue 20 

    This letter demonstrates that features embossed on the surface of a layer of photoresist can direct UV light in the photoresist layer. These topographical features act as optical elements: they focus/disperse and phase shift incident light in the optical near field, inside the resist layer. A...

  • Organic plastic laser in holographic materials by photopolymerization. Dorkenoo, Kokou D.; Crégut, Olivier; Fort, Alain // Applied Physics Letters;4/12/2004, Vol. 84 Issue 15, p2733 

    We demonstrate how to excite a laser mode in a thin film of organic holographic material. By initiating a photopolymerization process with visible light, we generate a distributed feedback laser in such films. The technique fulfills two important aims. First, the construction of a tunable laser...

  • Gold-nanoparticles-induced pattern metallization on high-roughness diamond film surfaces. Ruhai Tian; Jinfang Zhi // Applied Physics Letters;5/15/2006, Vol. 88 Issue 20, p203102 

    In this letter, we report an approach toward the pattern metallization of high roughness diamond film surfaces under mild experimental conditions. First, hydrogen-terminated diamond film surfaces were activated through bonding with allylamine molecules under 254 nm UV light irradiation. Then,...

  • Trends in photolithography analysis and control. Pellegrini, Joseph C. // Solid State Technology;Oct96, Vol. 39 Issue 10, p87 

    Discusses trends in photolithography analysis and control. Analysis history; Metrology analysis; Overlay composition; Static tuning to predictive tuning; Isodense bias and the common corridor analysis approach.

  • Chemically amplified resists for advanced lithography: Road to success or detour? Seeger, David // Solid State Technology;Jun97, Vol. 40 Issue 6, p115 

    Part III. Explores the development of chemically amplified (CA) resists for use in lithographic applications in the semiconductor industry. Advantages of CA systems; Limitations for more advanced applications; Alternatives to CA resists.

  • High-throughput optical direct write lithography. Paufler, J.; Kuck, H. // Solid State Technology;Jun97, Vol. 40 Issue 6, p175 

    Describes a system for submicron lithography by fast laser direct writing. Description of the principle behind this operation; System setup; Experimental system performance.

  • Europeans work on 193-nm lithography. Feuerstein, Bonnie // Laser Focus World;Mar96, Vol. 32 Issue 3, p41 

    Reports that a European project to develop ArF-laser photolithography will be funded under the European Community's ESPRIT program. Project description; Participants of the program.

  • In situ monitoring of the surface reconstructions on InP(001) prepared by molecular beam epitaxy. Ozanyan, K.B.; Parbrook, P.J. // Journal of Applied Physics;7/1/1997, Vol. 82 Issue 1, p474 

    Studies clean InP(001) surfaces prepared by molecular beam epitaxy (MBE) using reflection anisotropy spectroscopy (RAS) and reflection high-energy electron diffraction. Evolution of the RAS spectra.

  • Dislocation model of a subsurface crack. Fuqian Yang; Li, J.C.M. // Journal of Applied Physics;11/15/1997, Vol. 82 Issue 10, p4816 

    Presents a dislocation model of a subsurface crack parallel to the surface. Use of the bending theory; Inverse proportion of stress intensity factors to the 3/2 power of the distance between the subsurface crack and the free surface; Solution for the sub-surface crack problem using dislocation...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics