TITLE

An anisotropic magneto resistive sensor with set/reset field

AUTHOR(S)
He, D. F.; Shiwa, M.
PUB. DATE
September 2011
SOURCE
Review of Scientific Instruments;Sep2011, Vol. 82 Issue 9, p094703
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Using a set/reset magnetic field, an anisotropic magneto resistive (AMR) magnetic field sensing system was developed to reduce the low frequency noise of an AMR sensor. The magnetic field resolution of the AMR sensor was improved by about three times at the frequencies below 30 Hz and a magnetic field resolution of about 150 pT/[Square_Root]Hz was obtained at 1 Hz. For magnetic particle detection using an AMR sensor with set/reset method, the thermal disturbance effect was canceled well and the signal-to-noise ratio was improved by about three times.
ACCESSION #
66185152

 

Related Articles

  • Intrinsic timing jitter of superconducting nanowire single-photon detectors. Zhao, Q.; Zhang, L.; Jia, T.; Kang, L.; Xu, W.; Chen, J.; Wu, P. // Applied Physics B: Lasers & Optics;Sep2011, Vol. 104 Issue 3, p673 

    We report on an experimental investigation of the timing jitter (TJ) in a fiber-coupled detection system based on a superconducting nanowire single-photon detector (SNSPD). We used a picosecond pulsed laser and fiber delay lines to generate subsequent optical pulsed pairs in each period and...

  • Enhancing the sensitivity of magnetoelectric sensors by increasing the operating frequency. Petrie, Jonathan; Viehland, Dwight; Gray, David; Mandal, Sanjay; Sreenivasulu, Gollapudi; Srinivasan, Gopalan; Edelstein, Alan S. // Journal of Applied Physics;Dec2011, Vol. 110 Issue 12, p124506 

    We present a field modulation technique that increases the operating frequency of magnetoelectric (ME) sensors so that it can match the mechanical resonance frequency of the sensor. This not only improves the sensitivity but also reduces the effect of 1/f noise that is inherent at low...

  • Magnetic field structure in single late-type giants: β Ceti in 2010-2012. Tsvetkova, S.; Petit, P.; Aurière, M.; Konstantinova-Antova, R.; Wade, G. A.; Charbonnel, C.; Decressin, T.; Bogdanovski, R. // Astronomy & Astrophysics / Astronomie et Astrophysique;Aug2013, Vol. 556 Issue 6, p1 

    Aims. We study the behavior of the magnetic field and the line activity indicators of the single late-type giant β Ceti. Using spectropolarimetric data, we aim to reconstruct the magnetic field structure on the star's surface and to present the first magnetic maps for β Ceti. Methods. The...

  • Modeling and the signal-to-noise ratio research of magnetoelectric sensors at low frequency. Xing, Zengping; Li, Jiefang; Viehland, Dwight // Applied Physics Letters;10/1/2007, Vol. 91 Issue 14, p142905 

    The authors have modeled magnetoelectric (ME) laminate sensor units by considering both the ME laminate and detection circuitry. Theory predicts and experiments confirm that the signal-to-noise ratio increases with increasing frequency in the low frequency range. Our findings provide useful...

  • Signal to noise in the search for gravitational waves. Schulte, Bruce; Schnabel, Roman // Physics Today;Sep2012, Vol. 65 Issue 9, p8 

    A letter to the editor is presented in response to an article related to gravitational wave detection with the help of signal to noise by Johanna Miller in the November, 2011 issue.

  • Rally your noise tools for a good offense. BAKER, BONNIE // EDN Europe;Oct2013, Vol. 10, p22 

    The article offers tips in dealing with circuit noise problems. Highlighted is the approach that needs to plan for an organised campaign of action wherein the strongest tool to use is knowledge and from therein is the ideal design of a system where circuit noise could be controlled. Emphasised...

  • Noise Reduction of Electrocardiographic Signals using Wavelet Transforms. Qureshi, S. A.; Masood, I.; Hashmi, M.; Hanninen, S.; Sarwar, M.; Jameel, A. // Electronics & Electrical Engineering;2014, Vol. 20 Issue 3, p29 

    It has always been a critical issue to extract original signal having low signal-to-noise ratio (SNR) buried in heavy noise and interferences. Since the amplitude of the electrocardiogram (ECG) signal is smaller so while gathering and recording it may mix with various kinds of noises and...

  • Noise Reduction of Electrocardiographic Signals using Wavelet Transforms. Qureshi, S. A.; Masood, I.; Hashmi, M.; Hanninen, S.; Sarwar, M.; Jameel, A. // Electronics & Electrical Engineering;2014, Vol. 20 Issue 4, p39 

    It has always been a critical issue to extract original signal having low signal-to-noise ratio (SNR) buried in heavy noise and interferences. Since the amplitude of the electrocardiogram (ECG) signal is smaller so while gathering and recording it may mix with various kinds of noises and...

  • A Hybrid Electrocardiogram Denoising Technique Based on Continuous Wavelet Transform and Forward Wavelet Transform Translation Invariant. Hadji, Salah; Talbi, Mourad; Aouinat, Akram; Ellouze, Noureddine; Cherif, Adnène // International Review on Computers & Software;Mar2011, Vol. 6 Issue 2, p168 

    In this paper, we propose a denoising scheme of ECG signal based on smoothing of continuous wavelet transform coefficients. To evaluate the proposed technique, we compare it to Smoothing Translation Invariant Denoising Procedure recTI. Performance evaluation uses parameters like signal to noise...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics