TITLE

Unidirectional bistability in semiconductor waveguide ring lasers

AUTHOR(S)
Sorel, M.; Laybourn, P. J. R.; Giuliani, G.; Donati, S.
PUB. DATE
April 2002
SOURCE
Applied Physics Letters;4/29/2002, Vol. 80 Issue 17, p3051
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Large-diameter ridge-guided semiconductor lasers weakly coupled to a straight output waveguide show unidirectional operation and directional bistability at currents up to about twice the threshold. The direction of lasing in the ring may be controlled by biasing contacts at either end of the coupled guide. © 2002 American Institute of Physics.
ACCESSION #
6540302

 

Related Articles

  • Bistability in two-mode semiconductor lasers via gain saturation. Tang, C. L.; Schremer, A.; Fujita, T. // Applied Physics Letters;11/2/1987, Vol. 51 Issue 18, p1392 

    The conditions required to achieve bistability in two-mode semiconductor lasers via the nonlinearity associated with gain saturation are discussed. The laser can be switched between the bistable states through coherent or incoherent optical control. Wavelength bistability in such a laser is...

  • Effect of device parameters on bistable semiconductor laser. Hori, Yoshikazu; Sato, Hisanao; Serizawa, Hiroyuki; Kajiwara, Takao // Journal of Applied Physics;7/15/1986, Vol. 60 Issue 2, p534 

    Presents information on a study which analyzed the effect of device parameters on static and dynamic properties of inhomogenously current-injected bistable semiconductor lasers. Significance of optically bistable devices in optical computers and optical signal processing systems; Insight on the...

  • Conditions for self-sustained pulsation and bistability in semiconductor lasers. Ueno, Masayasu; Lang, Roy // Journal of Applied Physics;8/15/1985, Vol. 58 Issue 4, p1689 

    Analyzes the conditions for the occurrence for self-sustained pulsations and bistabilities in semiconductor lasers having a saturable absorber region. Important parameters in absorbing region to the cavity loss; Model structure used in the calculation; Expression for the bistable region.

  • Polarization bistability in external cavity semiconductor lasers. Fujita, T.; Schremer, A.; Tang, C. L. // Applied Physics Letters;8/10/1987, Vol. 51 Issue 6, p392 

    Polarization bistability between the transverse electric (TE) and transverse magnetic (TM) modes is observed in an external cavity semiconductor laser. Hysteresis in the polarization-resolved output power is obtained by controlling the optical feedback power of the TE mode via an intracavity...

  • Bistable operation of InGaAsP lasers using different absorber positions. Öhlander, Ulf; Sahlén, Olof // Applied Physics Letters;3/27/1989, Vol. 54 Issue 13, p1198 

    Experiments reveal that the physical characteristics related to absorptive bistability, such as lasing threshold, hysteresis width, and carrier redistribution, are greatly altered when the absorber position is changed from the middle section to one of the end-facet sections in a three-section...

  • Voltage-controlled optical bistability associated with two-dimensional exciton in GaAs-AlGaAs multiple quantum well lasers. Tarucha, Seigo; Okamoto, Hiroshi // Applied Physics Letters;9/8/1986, Vol. 49 Issue 10, p543 

    Voltage-controlled optical bistable laser operation is demonstrated for the first time using nonlinear optical absorption of two-dimensional excitons in a GaAs-AlGaAs multiple quantum well (MQW) laser. The laser used here is the conventional MQW laser diode but with tandem electrode...

  • Bistability in coupled cavity semiconductor lasers. Dutta, N. K.; Agrawal, G. P.; Focht, M. W. // Applied Physics Letters;1984, Vol. 44 Issue 1, p30 

    Experimental results on bistable operation of coupled cavity semiconductor lasers are presented. The light level at the upper and lower states can be controlled by varying the injection current. A model calculation of the coupled cavity laser system shows that the bistability is due to...

  • InGaAs/InAlAs bistable multiple quantum well lasers with large on/off ratio using the resonant tunneling effect. Kawamura, Y.; Wakita, K.; Mikami, O. // Applied Physics Letters;10/17/1988, Vol. 53 Issue 16, p1462 

    Bistable operation with a large on/off ratio of 800:1 is achieved in InGaAs/InAlAs multiple quantum well (MQW) lasers using the resonant tunneling effect at 77 K. Structural dependence of resonant tunneling characteristic in the MQW structures reveals that the threshold current density, at which...

  • Optical bistability at the band gap in InAs. Poole, C. D.; Garmire, E. // Applied Physics Letters;1984, Vol. 44 Issue 4, p363 

    Observation of optical bistability at the band gap in InAs is reported. Clear hysteresis was seen in the reflected signal from a Fabry-Perot etalon consisting of polished n-type InAs with silver deposited on the back surface. By using the 3.096-μm line of an HF laser, which matches the band...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics