TITLE

LLM and X-FEM based interface modeling of fluid-thin structure interactions on a non-interface-fitted mesh

AUTHOR(S)
Sawada, Tomohiro; Tezuka, Akira
PUB. DATE
September 2011
SOURCE
Computational Mechanics;Sep2011, Vol. 48 Issue 3, p319
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents a non-interface-fitted mesh method for fluid-thin structure interactions. The key components are the Lagrangian Lagrange-multiplier (LLM) method and the extended finite element method (X-FEM). The LLM couples fluid and thin structure through the Lagrangian nodes of the structure element. The X-FEM gives flow discontinuity to the fluid elements intersected by the structure element. The combination method is verified through applications to flow with a domain-partitioning boundary and flow-induced flapping of a flexible filament. We discuss how the discontinuities at the interface enhance the simulation results, how the lack of the discontinuities affects the results, and identify some effects of these discontinuity enrichments.
ACCESSION #
64894654

 

Related Articles

  • Finite Element Simulation of Medium-Range Blast Loading Using LS-DYNA. Han, Yuzhen; Liu, Huabei // Shock & Vibration;7/16/2015, Vol. 2015, p1 

    This study investigated the Finite Element simulation of blast loading using LS-DYNA. The objective is to identify approaches to reduce the requirement of computation effort while maintaining reasonable accuracy, focusing on blast loading scheme, element size, and its relationship with scale of...

  • Immersed smoothed finite element method for fluid-structure interaction simulation of aortic valves. Yao, Jianyao; Liu, G.; Narmoneva, Daria; Hinton, Robert; Zhang, Zhi-Qian // Computational Mechanics;Dec2012, Vol. 50 Issue 6, p789 

    This paper presents a novel numerical method for simulating the fluid-structure interaction (FSI) problems when blood flows over aortic valves. The method uses the immersed boundary/element method and the smoothed finite element method and hence it is termed as IS-FEM. The IS-FEM is a...

  • Accurate fluid-structure interaction computations using elements without mid-side nodes. Nagaoka, Shinsuke; Nakabayashi, Yasushi; Yagawa, Genki; Kim, Young // Computational Mechanics;Sep2011, Vol. 48 Issue 3, p269 

    The paper proposes a new analysis method for fluid-structure problems, which has nodal consistency at the fluid-structure interface and its calculation efficiency and accuracy are high. The incompressible viscous fluid analysis method using the P1-P1 element based on SUPG/PSPG developed by...

  • Coupled analysis of material flow and die deflection in direct aluminum extrusion. Assaad, W.; Geijselaers, H. J. M. // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p495 

    The design of extrusion dies depends on the experience of the designer. After the die has been manufactured, it is tested during an extrusion trial and machined several times until it works properly. The die is designed by a trial and error method which is an expensive process in terms of time...

  • Numerical Simulation of Liner Curvature Radius on Formation of LEFP. Ruijun Gou // Advanced Materials Research;2014, Vol. 941, p2305 

    In order to obtain a linear explosively formed projectile (LEFP) with a good flying form under large stand-off, the LS-Dyna finite element analysis software and arbitrary Lagrangian -Eulerian (ALE) algorithm were used to simulate the forming process of LEFP with a 30mm charge structure diameter....

  • Resonant pumping in a multilayer impedance pump. Loumes, L.; Avrahami, I.; Gharib, M. // Physics of Fluids;Feb2008, Vol. 20 Issue 2, p023103 

    This paper introduces the concept of multilayer impedance pump, a novel pumping mechanism inspired by the embryonic heart structure. The pump is a composite two-layer fluid-filled elastic tube featuring a thick gelatinous internal. Pumping is based on the impedance pumping mechanism. In an...

  • On the coupling between fluid flow and mesh motion in the modelling of fluid—structure interaction. Dettmer, Wulf; Perić, Djordje // Computational Mechanics;Dec2008, Vol. 43 Issue 1, p81 

    Partitioned Newton type solution strategies for the strongly coupled system of equations arising in the computational modelling of fluid–solid interaction require the evaluation of various coupling terms. An essential part of all ALE type solution strategies is the fluid mesh motion. In...

  • A stabilized method for transient transport equations. Henao, Carlos A. A.; Coutinho, Alvaro L. G. A.; Franca, Leopoldo P. // Computational Mechanics;Jun2010, Vol. 46 Issue 1, p199 

    We present a stabilized method for the transient advective-reactive-diffusive equation. The discretization is based on Rothe’s method, which discretizes in time before the spatial discretization. The resulting steady state advective-reactive-diffusive equation is approximated by the...

  • Study The Fluid Structure Interaction Due to Dynamic Response of Elevated Concrete Water Tank. Algreane, Gareane A. I.; Osman, S. A.; Karim, Othman A.; Kasa, A. // Australian Journal of Basic & Applied Sciences;2011, Vol. 5 Issue 9, p1084 

    Fluid structure interaction (FSI) is complicated phenomena in which researches trying to suggest new techniques to account its effects in elevated concrete water tanks. Rectangular and circular shapes of elevated tanks have been chosen to conduct this study. In this paper the adding of impulsive...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics