TITLE

Acoustic waves loss in Al-7075-T6 and St 304

AUTHOR(S)
Abdullah, A.; Malaki, M.
PUB. DATE
March 2011
SOURCE
Iranian Journal of Physics Research;Mar2011, Vol. 11 Issue 1, p6
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Propagation and dispersion of acoustic waves is one of the important phenomena in physics. Acoustic-waves are nowadays widely used in a variety of applications ranging from underwater communications, identification and specification of the internal defects of materials to extracorporeal shock wave lithotripsy. Apart from application and utilization of such phenomena, study on production and propagation of acoustic waves have a special importance. This paper is focused on the experimental and the analytical investigation of acoustic-waves loss in metallic materials. Firstly, the governing differential equations of the acoustic waves propagation are derived and solved for a damped cylindrically shaped rod. With regard to boundary and initial conditions, the equation and the curve of damped acoustic wave displacement are obtained. By using experimental modal techniques, experimental investigations on the energy loss and the extraction of damping coefficients of acoustic waves are done. The experimental information obtained from experimental tests such as Frequency Response Function, the formula and the curve of the energy loss versus frequency are extracted. Selected metallic materials for the experimental set-ups are two specimens of steel and aluminum.
ACCESSION #
64441533

 

Related Articles

  • Tunable mechanical filter for longitudinal vibrations. Asiri, S. // Shock & Vibration;2007, Vol. 14 Issue 4, p377 

    This paper presents both theoretically and experimentally a new kind of vibration isolator called tunable mechanical filter which consists of four parallel hybrid periodic rods connected between two plates. The rods consist of an assembly of periodic cells, each cell being composed of a short...

  • General methods for L/M-fold resizing of compressed images using lapped transforms. Lee, C.W. // IET Image Processing;2007, Vol. 1 Issue 3, p295 

    Two general methods are proposed for the arbitrary L/M-fold resizing of compressed images using lapped transforms. These methods provide general resizing frameworks in the transform domain. In order to analyse the image size conversion technique using lapped transforms, the impulse responses and...

  • Experimental verification of the temperature effects on Sader’s model for multilayered cantilevers immersed in an aqueous medium. Kim, S.; Kihm, K. D. // Applied Physics Letters;8/7/2006, Vol. 89 Issue 6, p061918 

    Recently, Sader [J. Appl. Phys. 84, 64 (1998)] and Green and Sader [J. Appl. Phys. 92, 6262 (2002)] developed a theory predicting thermally driven frequency responses of a microcantilever immersed in a fluid. This letter presents an experimental investigation of the temperature effects on...

  • Passive control of flexible structures by confinement of vibrations. Chtiba, M. Ouled; Choura, S.; El-Borgi, S.; Nayfeh, A.H. // Shock & Vibration;2007, Vol. 14 Issue 4, p321 

    We propose a two-step strategy for the design of passive controllers for the simultaneous confinement and suppression of vibrations (SCSV) in mechanical structures. Once the sensitive and insensitive elements of these structures are identified, the first design step synthesizes an active control...

  • Bias errors due to leakage effects when estimating frequency response functions. Josefsson, Andreas; Ahlin, Kjell; Broman, Göran // Shock & Vibration;2012, Vol. 19 Issue 6, p1257 

    Frequency response functions are often utilized to characterize a system's dynamic response. For a wide range of engineering applications, it is desirable to determine frequency response functions for a system under stochastic excitation. In practice, the measurement data is contaminated by...

  • Finite element model updating using FRF measurements. Asma, Farid; Bouazzouni, Amar // Shock & Vibration;2005, Vol. 12 Issue 5, p377 

    This study presents a new updating method based on measured frequency response functions. The objective function of the minimization procedure is formed by the difference between the measured and the analytical frequency responses. The updating parameters are the correction coefficients related...

  • Improving robustness of tuned vibration absorbers using shape memory alloys. Elahinia, Mohammad H.; Jeong-Hoi Koo; Honghao Tan // Shock & Vibration;2005, Vol. 12 Issue 5, p349 

    A conventional passive tuned vibration absorber (TVA) is effective when it is precisely tuned to the frequency of a vibration mode; otherwise, it may amplify the vibrations of the primary system. In many applications, the frequency often changes over time. For example, adding or subtracting...

  • Vibration excitation and control of a pedestrian walkway by individuals and crowds. Brownjohn, James Mark William; Tao Neng Fu // Shock & Vibration;2005, Vol. 12 Issue 5, p333 

    As part of a continuing study on effects of humans on loading and dynamic response of footbridges, a steel frame walkway has been the subject of studies on the effects of multiple pedestrians with respect to loading and response mitigation. Following finite element modeling and experimental...

  • Vibro-Acoustic Characterization and Optimization of Periodic Cellular Material Structures (PCMS) for NVH Applications. Mohammad Al-Zubi; Ayorinde, Emmanuel; Witus, Gary; Dundar, Mehmet; Warriach, Manjinder; Murty, Yellapu // Journal of Materials Science Research;2013, Vol. 2 Issue 4, p64 

    NVH (Noise, vibration, and harshness) performance has been identified as having a significant influence in the purchase considerations of most automobile purchasers. Periodic cellular material structures (PCMS) are recently introduced multi-functional structures, commonly in sandwich form, that...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics