TITLE

Permeability Organic Coatings

AUTHOR(S)
Schoff, Clifford K.
PUB. DATE
March 2011
SOURCE
CoatingsTech;Mar2011, Vol. 8 Issue 3, p64
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The article discusses aspects of permeability measurements in organic coatings. It explains that mechanism of permeability, which is a measure of the ability of a solid to be permeated, involves both solution and diffusion in which measurements must be done with uniform films or sheets. It states that the rate of permeability depends on film thickness and E96 and D1653 are the two test methods used to test permeability in coatings industry.
ACCESSION #
64433282

 

Related Articles

  • Approaches to the Physico-Chemical and Mechanical Characterisation of Functional Coatings, Part II. Forster, A.; Neudeck, T.; Blatcher, S. // Medical Device Technology;Nov/Dec2008, Vol. 19 Issue 7, p42 

    Part 1 of this article� demonstrated that knowledge of coating science is important in the formulation and early development of a functionally active coating for a medical device/combination product. Part II focuses on the testing challenges and verification of the finished coating on the...

  • Possibilities of the magnetodynamic method for testing the thickness of coatings with nonuniform properties (experiment). Lukhvich, A.; Bulatov, O.; Luk�yanov, I. // Russian Journal of Nondestructive Testing;Nov2009, Vol. 45 Issue 11, p779 

    In measuring by the magnetodynamic method the thickness of nickel coatings having thicknesses of up to 1000 � and characterized by an almost maximum spread of structural properties, the possibility of tuning out their effect on the error of measurements was studied experimentally. The...

  • ELECTROCOAT CLINIC. Jacobs, Ron // Products Finishing;Sep2006, Vol. 70 Issue 12, p98 

    The article presents questions and answers related to electrocoating. One person asks about the causes why some parts only receive a thin film thickness while parts on the same rack are fully coated. A reader asks whether electrocoating have the same problems with laser cut edges like powder,...

  • Characteristics of thin films fabricated by spray coating on rough and permeable paper substrates. Zabihi, Fatemeh; Eslamian, Morteza // Journal of Coatings Technology & Research;May2015, Vol. 12 Issue 3, p489 

    This work presents the results of simple but effective experiments designed and performed to study the characteristics of coatings made by air-assist spray deposition of a food-dye solution on regular printer and glossy papers, with different surface roughness and porosity. The objective of this...

  • Formulation Effects on the Thermomechanical Properties and Permeability of Free Films and Coating Films. Jinghua Yuan; Dunn, Doug; Clipse, Nancy M.; Newton Jr., Ray J. // Pharmaceutical Technology;Mar2009, Vol. 33 Issue 3, p88 

    The article discusses the characteristics of water and plasticizer, polyethylene glycol 3350, and their effect on the thermomechanical and permeability properties of films used for osmotic drug delivery processes. Research results indicated that when plasticizer levels were increased, a...

  • Water Permeability of Fabric and Its Testing Methods.  // China Textile Leader;Jul2012, Issue 7, p154 

    This paper explained the influencing factors and test methods to water permeability and waterproofness of fabrics, and analyzed their three kinds of influencing factors, namely, the infiltration of the surface fiber, fabric coating and the environment.

  • Oxidation Control with Chromate Pretreatment of MCrAlY Unmelted Particle and Bond Coat in Thermal Barrier Systems. Yamano, Hideaki; Tani, Kazumi; Harada, Yoshio; Teratani, Takema // Journal of Thermal Spray Technology;Jun2008, Vol. 17 Issue 2, p275 

    MCrAlY alloy bond coat is widely used in thermal barrier coating (TBC) systems to protect substrates from high-temperature oxidizing environments. However, failure of the ceramic topcoat can occur due to a thermally grown oxide (TGO) that grows at the interface between the bond coat and the...

  • Thin Coating Challenges. Cohen, Edward O. // Paper, Film & Foil Converter;Feb2010, Vol. 84 Issue 2, p30 

    The article provides information on the trend in the development of new web-coated products and the technical challenges on the overall processes. It states that the advantages of thin coatings include the reduction of material cost, good quality and performance. It also notes the challenges...

  • Coating Properties and Test Procedures. Leeds, J. M.; Leeds, S. S. // Pipeline & Gas Journal;Mar2010, Vol. 237 Issue 3, p50 

    The article discusses the importance of coating in ensuring external corrosion protection for pipelines. It outlines the two basic contributions of coating in stopping external corrosion. It notes the problems associated with film coatings, and induction heating. It discusses the tests used for...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics