TITLE

Hybridized boron–carbon nitride fibrous nanostructures on Ni substrates

AUTHOR(S)
Yap, Yoke Khin; Yoshimura, Masashi; Mori, Yusuke; Sasaki, Takatomo
PUB. DATE
April 2002
SOURCE
Applied Physics Letters;4/8/2002, Vol. 80 Issue 14, p2559
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Stoichiometric BC[sub 2]N films can be deposited on Si (100) at 800 °C, however, they are phase separated as pure carbon and BN phases. Likewise, hybridized boron–carbon nitride (BCN) films can be synthesized on Ni substrates. On Ni, the carbon and BN phases are hybridized through carbon nitride and boron carbide bonds. These films appeared as fibrous nanostructures. Evidence indicates that the Ni substrate acts as a sink for the carbon and forces the carbon composites to grow on top of the B and N atoms. However, as these films are grown thicker, phase separation occurs again. These results indicate that hybridized BCN phases should now be regarded as semiconducting or superhard nanostructures. High-temperature deposition on Ni substrates might be a solution to the obstacle of preparing hybridized BCN phases. © 2002 American Institute of Physics.
ACCESSION #
6427063

 

Related Articles

  • Evolution of Nanostructural Ensembles in Boride�Nitride Films. Andrievski, R. A.; Kalinnikov, G. V.; Oblezov, A. E.; Shtansky, D. V. // Doklady Physics;May2002, Vol. 47 Issue 5, p353 

    Analyzes the evolution of nanostructural ensembles in boride-nitride films. Phase composition of the films; Harness of films; Average size of the crystallites in the original and annealed films; Effect of annealing on the microhardness.

  • Structure of boron nitride nanotubules. Demczyk, B. G.; Cumings, J.; Zettl, A.; Ritchie, R. O. // Applied Physics Letters;4/30/2001, Vol. 78 Issue 18, p2772 

    We have used high-resolution transmission electron microscopy to resolve the [0001] projected basal plane structure and chirality relationships in boron nitride nanotubes. Evidence for tube growth along both <101¯0> and <112¯0> is found. Our results suggest that the <112¯0> (armchair)...

  • Unique morphologies of boron nitride nanotubes. Golberg, D.; Bando, Y. // Applied Physics Letters;7/16/2001, Vol. 79 Issue 3 

    Unusual morphological features of boron nitride nanotubes produced via metal–oxide-promoted high-temperature syntheses from carbon nanotubes, boron oxide, and nitrogen were observed using high-resolution transmission electron microscopy. The tubes normally displayed open ends and...

  • Flexible pulse-wave sensors from oriented aluminum nitride nanocolumns. Akiyama, Morito; Ueno, Naohiro; Nonaka, Kazuhiro; Tateyama, Hiroshi // Applied Physics Letters;3/24/2003, Vol. 82 Issue 12, p1977 

    Flexible pulse-wave sensors were fabricated from density-packed oriented aluminum nitride nanocolumns prepared on aluminum foils. The nanocolumns were prepared by the rf magnetron sputtering method and were perpendicularly oriented to the aluminum foil surfaces. The sensor structure is...

  • Synthesis, structure, and photoluminescence of very thin and wide alpha silicon nitride (α-Si[sub 3]N[sub 4]) single-crystalline nanobelts. Long-Wei Yin, L.; Bando, Yoshio; Ying-Chun Zhu; Yu-Bao Li, Yoshio // Applied Physics Letters;10/27/2003, Vol. 83 Issue 17, p3584 

    Large quantities of very thin and wide single-crystal alpha silicon nitride (α-Si[sub 3]N[sub 4]) nanobelts were synthesized by a vapor-solid thermal reaction between ammonia and silicon monoxide (SiO) without using any added catalyst. Scanning electron microscopy, high-resolution electron...

  • Formation and structure of boron nitride conical nanotubes. Han, W.Q.; Bourgeois, L.; Bando, Y.; Kurashima, K.; Sato, T. // Applied Physics A: Materials Science & Processing;2000, Vol. 71 Issue 1, p83 

    Abstract. Nanotubes exhibiting a novel structure - boron nitride (BN) conical nanotubes whose walls consist of conical layers with their cone axis parallel to the tube axis, as opposed to ordinary nanotubes, composed of concentric cylindrical layers with their normal perpendicular to the tube...

  • JMR volume 30 issue 1 Cover and Back matter.  // Journal of Materials Research;Jan2015, Vol. 30 Issue 1, pb1 

    No abstract available.

  • Publisher's Note: 'GaN nanostructure design for optimal dislocation filtering' [J. Appl. Phys. 108, 074313 (2010)]. Liang, Zhiwen; Colby, Robert; Wildeson, Isaac H.; Ewoldt, David A.; Sands, Timothy D.; Stach, Eric A.; García, R. Edwin // Journal of Applied Physics;Nov2010, Vol. 108 Issue 10, p109901 

    A correction to the article "GaN nanostructure design for optimal dislocation filtering," Zhiwen Liang et al, published in a previous issue is presented.

  • Bulk synthesis and characteristic properties of boron nitride nanostructures: nanocapsules and nanotubes. Borowiak-Palen, E.; Rümmeli, M. H.; Knupfer, M.; Behr, G.; Gemming, T.; Kalenczuk, R. J.; Pichier, T. // AIP Conference Proceedings;2004, Vol. 723 Issue 1, p141 

    A new synthesis route for the formation of boron nitride (BN) nanocapsules by means of a substitution process using single wall carbon nanotubes as templates, with yields of > 95% is presented. It is also shown that these BN nanocapsules can act as ideal reference samples for the determination...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics