TITLE

Deposition of organic electrodes based on wet process for organic devices

AUTHOR(S)
Saito, Kazuhiro; Kobayashi, Shunsuke
PUB. DATE
February 2002
SOURCE
Applied Physics Letters;2/25/2002, Vol. 80 Issue 8, p1489
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the deposition of patterned organic electrodes of charge transfer complexes based on a printing method. Functions of deposited organic electrodes; Difference between the organic-organic and organic-inorganic contacts; Application of upper electrodes of organic photovoltaic cells.
ACCESSION #
6411765

 

Related Articles

  • Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C[sub 60] heterojunction.... Halls, J.J.M.; Pichler, K. // Applied Physics Letters;5/27/1996, Vol. 68 Issue 22, p3120 

    Measures the photovoltaic response of two-layer photocells formed with layers of the conjugated polymer poly, PPV, fullerene and C[sub 60] formed between indium-tin oxide and aluminum electrodes. Measurement of peak quantum efficiencies; Response of the photovoltaic model; Demonstration of the...

  • Photoelectrochemical Investigations on HgxCd1-xSe Thin Film Electrode/Electrolyte System. Pujari, Vithal Bhivaba; Deshmukh, Lalasaheb Patangrao // Turkish Journal of Physics;2008, Vol. 32 Issue 2, p105 

    Thin film electrodes of HgxCd1-xSe (0 ≤ x ≤ 0.2) were prepared in an aqueous alkaline medium (pH ≅=11) on highly conducting stainless steel substrates by chemical bath technique. Use of these films was made as an active photoelectrode in an electrochemical photovoltaic cell,...

  • Electrospun TiO2 nanowires for hybrid photovoltaic cells. Chuangchote, Surawut; Sagawa, Takashi; Yoshikawa, Susumu // Journal of Materials Research;9/14/2011, Vol. 26 Issue 17, p2316 

    A simple and controllable fabrication of TiO2 nanowires by electrospinning and their applications to the electron transporting layer for hybrid organic-inorganic photovoltaic cells are reported. TiO2 nanowires were directly electrospun onto an indium tin oxide on glass substrate from a solution...

  • Planar polymer photovoltaic cells with millimeter interelectrode spacing. Gao, Jun; Hui, Jin; Hou, Yanbing; Alem, Salima // Journal of Applied Physics;Oct2008, Vol. 104 Issue 8, p084512 

    We present the photovoltaic measurements of planar photovoltaic cells with extremely large interelectrode spacing based on either pure polymers or polymer/fullerene blends. The planar configuration allows for both uniform and site-selective illuminations. As expected, cells with identical...

  • Photovoltaic cells fabricated by electrophoretic deposition of CdSe nanocrystals. Smith, Nathanael J.; Emmett, Kevin J.; Rosenthal, Sandra J. // Applied Physics Letters;7/28/2008, Vol. 93 Issue 4, p043504 

    Electrophoretic deposition was used to deposit CdSe nanocrystals on TiO2 for use in photovoltaic cells. The deposition current underwent a simple exponential decay, consistent with the current being comprised of charge transfer from charged nanocrystals to the electrodes. Rutherford...

  • Plasmonic nanocavity arrays for enhanced efficiency in organic photovoltaic cells. Lindquist, Nathan C.; Luhman, Wade A.; Sang-Hyun Oh; Holmes, Russell J. // Applied Physics Letters;9/22/2008, Vol. 93 Issue 12, p123308 

    We demonstrate enhanced power conversion efficiency in organic photovoltaic (OPV) cells incorporated into a plasmonic nanocavity array. The nanocavity array is formed between a patterned Ag anode and an unpatterned Al cathode. This structure leads to the confinement of optical energy and...

  • Operation of a reversed pentacene-fullerene discrete heterojunction photovoltaic device. Nanditha, D. M.; Dissanayake, M.; Hatton, Ross A.; Curry, Richard J.; Silva, S. R. P. // Applied Physics Letters;3/12/2007, Vol. 90 Issue 11, p113505 

    The photoresponse of reversed bilayer organic photovoltaic device based on pentacene and C60 is examined, and the mechanism of photocurrent generation is shown to be different to that in conventional heterojunction devices, with free charge carriers generated at the electrode-organic interfaces...

  • Plasma Grooving System Using Atmospheric Pressure Surface Discharge Plasma. Hamada, Toshiyuki; Sakoda, Tatsuya; Otsubo, Masahisa // Plasma Chemistry & Plasma Processing;Jun2009, Vol. 29 Issue 3, p197 

    To fabricate narrow front contact grooves on a single crystalline silicon solar cell, we carried out etching of a silicon nitride film on a silicon substrate using the surface discharge plasma operated at atmospheric pressure. The control of groove width by changing the discharge voltage ( Vd)...

  • EFFICIENCY IMPROVEMENT IN TiO2-PARTICLE BASED SOLAR CELLS AFTER DEPOSITION OF METAL IN SPACES BETWEEN PARTICLES. Saehana, Sahrul; Prasetyowati, Rita; Hidayat, Marina I.; Arifin, Pepen; Khairurrijal; Abdullah, Mikrajuddin // International Journal of Basic & Applied Sciences;Dec2011, Vol. 11 Issue 6, p15 

    We report the fabrication of solar cells employing TiO2 particles as the active light-absorbing material. The solar cells were prepared by depositing TiO2 particles on a transparent conducting electrode (ITO), followed by a polymer electrolyte and a counter electrode. Copper particles were...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics