Structure and magnetic properties of nanostructured PrCo[sub7-x]Ti[subx](s+0-0.4) prepared by mechanical milling and subsequent annealing

Jian Zhang; Bao-gen Shen; Shao-ying Zhang; Wang, Y.Q.; Duan, X.F.
February 2002
Applied Physics Letters;2/25/2002, Vol. 80 Issue 8, p1418
Academic Journal
Examines the structure and magnetic properties of nanostructured PrCo[sub 7-x]Ti[subx] of Pr(Co,Ti)[sub7] phase alloy. Administration of mechanical milling and subsequent annealing; Coercivity of the material; Influence of the high uniaxial anisotropy field of the Pr(Co,Ti)[sub 7] phase.


Related Articles

  • Induced magnetic anisotropy in Fe[sub 80]B[sub 20] metallic glass by mechanical milling. Fan, G.J.; Quan, M.X. // Applied Physics Letters;2/19/1996, Vol. 68 Issue 8, p1159 

    Examines the effect of mechanical milling on the magnetic anisotropy of iron[sub 80]boron[sub 20] metallic glass. Use of transmission Mossbauer spectroscopy; Occurrence of chemical short-range order and surface crystallization; Rotation of magnetic moment direction in the metallic glass; Effect...

  • Remarkable improvement of coercivity in nanostructured TbMn[sub 6]Sn[sub 6] powders produced by mechanical milling. Zhao, Peng; Zhang, Jian; Zhang, Shao-ying; Zhang, Hong-wei; Sun, Zhi-gang; Shen, Bao-gen // Journal of Applied Physics;5/15/2002 Part 1, 2 & 3, Vol. 91 Issue 10, p7860 

    Nanostructured TbMn[sub 6]Sn[sub 6] powders have been obtained by mechanical milling cast alloys and subsequent annealing at different temperatures. Powders were synthesized by milling for 1, 3, 5, and 8 h, and annealed from 573 to 773 K for 20 min. For the TbMn[sub 6]Sn[sub 6] powders milled...

  • Hydrogen as a technological medium for the formation of nanostructures in Sm-Co ferromagnetic alloys. Bulyk, I.; Panasyuk, V. // Materials Science;Jul2012, Vol. 48 Issue 1, p1 

    We present a survey of the results of application of various modes of hydrogen treatment of ferromagnetic materials based on the SmCo compound aimed at the formation of anisotropic nanostructures, namely, of mechanochemical milling, thermal treatment [hydrogenation, disproportionation,...

  • Mechanical Milling Induced Improvement In Magnetic Property Of Nanosized Ni0.35Zn0.65Fe2O4: A Hyperfine Characterization. Dey, S.; Mukherjee, S.; Ghosh, B.; Kumar, S.; Poddar, A.; Mazumdar, C.; Banerjee, S. // AIP Conference Proceedings;6/30/2011, Vol. 1347 Issue 1, p230 

    The magnetic properties of nano-sized Ni0.35Zn0.65Fe2O4 prepared by high-energy ball milling have been investigated using dc magnetization. The study on relaxation dynamics of the system using Mössbauer spectroscopy is also reported. The Mössbauer spectrum at 300 K exhibits hyperfine split...

  • Two-phase high-performance Nd–Fe–B powders prepared by mechanical milling. Neu, V.; Schultz, L. // Journal of Applied Physics;8/1/2001, Vol. 90 Issue 3 

    Nanocrystalline two-phase NdFeB+α-Fe material was prepared by milling techniques and subsequent heat treatment. These isotropic exchange-coupled powders show excellent hard magnetic properties with enhanced remanences up to 1.20 T and energy densities (BH)[sub max] around 150 kJ/m[sup 3]. The...

  • Structure and magnetic properties of anisotropic Sm[sub 2]Fe[sub 17]N[sub x] powders. Ding, J.; McCormick, P.G.; Street, R. // Applied Physics Letters;11/30/1992, Vol. 61 Issue 22, p2721 

    Investigates the magnetic properties of anisotropic Sm[sub 2]Fe[sub 17]N[sub x] powders. Application of mechanical milling and nitriding; Effect of milling on crystal alignment; Alignment of the nitrided samples in a magnetic field; Influence of milling time, ball size, and heat treatment on...

  • Beneficial effect of nonmagnetic Y on magnetic properties due to the enhancement of exchange coupling in nanocomposite (Nd,Y)[sub 2]Fe[sub 14]B/α–Fe magnets. Zhang, M.; Zhang, Z. D.; Sun, X. K.; Liu, W.; Geng, D. Y.; Jin, X. M.; You, C. Y.; Zhao, X. G. // Journal of Applied Physics;11/1/2002, Vol. 92 Issue 9, p5569 

    We have studied the nanocomposite magnets with nominal compositions of Nd[SUB8-x]Y[SUBx]Fe[SUB88]B[SUB4] (x = 0-4.0) by mechanical milling techniques and subsequent heat treatment. We find that there exists the beneficial effect of nonmagnetic Y substitution for magnetic Nd on magnetic...

  • Effect of thermal fluctuations on the recoil loops of SmCo5/Fe nanocomposite system. Rong, Chuan-bing; Liu, J. Ping // Journal of Applied Physics;Apr2009, Vol. 105 Issue 7, p07A714 

    The correlation between the recoil loop openness and the activation volume has been studied for the SmCo5/α-Fe nanocomposite powder material prepared by mechanical alloying. The α-Fe phase content in the nanocomposite powders was adjusted by varying the amount of α-Fe addition in raw...

  • MECHANICAL ALLOYING OF FeCoCr. González, Gema; Oleszak, Dariusz; Sagarzazu, Amaya; Villalba, Rafael; D'Onofrio, Lisseta // La Revista Latinoamericana de Metalurgia y Materiales, RLMM;2011, Vol. 31 Issue 1, p64 

    The mechanical alloying of Fe-Co-Cr has been studied from the structural point of view by different techniques: XRD, TEM and Mössbauer spectroscopy, following the transformations taking place during milling. The alloys FeCo, Fe40Co50Cr10 and Fe50Co40Cr10 were prepared by milling of the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics