TITLE

GOING THE DISTANCE

PUB. DATE
March 2002
SOURCE
Motor;Mar2002, p117
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Focuses on the brake systems of automobiles. Factors affecting speed; Significance of aerodynamic drag; Impact on immovable objects.
ACCESSION #
6387316

 

Related Articles

  • Inclusion of a Drag Approach in the Town Energy Balance (TEB) Scheme: Offline 1D Evaluation in a Street Canyon. Hamdi, R.; Masson, V. // Journal of Applied Meteorology & Climatology;Oct2008, Vol. 47 Issue 10, p2627 

    The Town Energy Balance module bridges the micro- and mesoscale and simulates local-scale urban surface energy balance for use in mesoscale meteorological models. Previous offline evaluations show that this urban module is able to simulate in good behavior road, wall, and roof temperatures and...

  • Energy Dissipation During Vibrational Motion in a Liquid. Gerasimov, S. A. // Journal of Applied Mechanics & Technical Physics;Sep/Oct2002, Vol. 43 Issue 5, p706 

    The paper reports calculation results and an approximate description of the power expended by a system in vibrational motion in a medium with drag proportional to velocity. It is shown that the power expended in vibrational motion is proportional to the squared mean velocity and the...

  • GAS GAMES. MILLER, JORDAN // IFR;Aug2014, Vol. 30 Issue 8, p6 

    The article discusses different ways to measure fuel efficiency by citing an example of Cessna 172N and Cessna 340A aircrafts. Topics discussed include measurement of speed at minimum drag for required lift, decrease in the density of air with rising altitude and function of hydroplanes by...

  • The Jet Exceptions.  // Aviation Safety;Oct2012, Vol. 32 Issue 10, p14 

    The article presents the author's insights on the roles of pitch and power in operating jet planes. The author states that jet pilots control altitude with pitch, while they control airspeed with power. Furthermore, the technique to establish a high-drag configuration in a straight-wing piston...

  • Design of Serrate-Semi-Circular Riblets with Application to Skin Friction Reduction on Engineering Surfaces. Saravi, Samira Sayad; Cheng, Kai; Chong, Tze Pei; Vathylakis, Alexandros // International Journal of Flow Control;Sep2014, Vol. 6 Issue 3, p83 

    Drag reduction in wall-bounded flows can be achieved by the passive flow control technique through the application of bio-inspired riblet surfaces. This paper presents the innovative design of Serrate-Semi-Circular riblet surfaces particularly focusing on the intrinsic relationship between the...

  • Evaluation of Planar Elongational Viscosity by Drag Force Acting on a Bullet Bob. TAKAHASHI, Tsutomu; SHIRAKASHI, Masataka // AIP Conference Proceedings;7/7/2008, Vol. 1027 Issue 1, p1129 

    A simple technique to evaluate planar elongational viscosity for various fluids including low viscous fluids is examined. A bullet shaped bob is pushed into a sample fluid held in a cylindrical cup. The gap between the bob and the cup forms an annular convergent channel to produce the planar...

  • Effect of roughness on pressure fluctuations in a turbulent channel flow. Bhaganagar, Kiran; Coleman, Gary; Kim, John // Physics of Fluids;Feb2007, Vol. 19 Issue 2, p028103 

    Direct numerical simulation is used to investigate the nature of pressure fluctuations induced by surface roughness in a turbulent channel flow at Reτ=400 for three-dimensional periodic roughness elements, whose peaks overlap approximately 25% of the logarithmic layer. The three-dimensional...

  • The effect of rotation and surface friction on orographic drag. Olafsson, Haraldur; Bougeault, Philippe // Journal of the Atmospheric Sciences;1/1/97, Vol. 54 Issue 1, p193 

    Investigates the form and magnitude of the pressure drag created by 3D elliptical mountains of various heights and aspect ratios using a numerical, hydrostatic model. Simulation series corresponding to increasing degrees of realism; Effects of surface friction; Combined effect of rotation and...

  • Quietly stepping up the pace. Bamsey, Ian // Automotive Engineer;Jul97, Vol. 22 Issue 6, p30 

    Focuses on the motor sport technology. Development of high-powered engines; Contribution of tire improvements on the increase of car speeds; Innovations in Formula One brake technology.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics