TITLE

Investigations on Non-Condensation Gas of a Heat Pipe

AUTHOR(S)
Jung-Chang Wang
PUB. DATE
April 2011
SOURCE
Engineering;Apr2011, Vol. 3 Issue 4, p376
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper utilizes numerical analysis method to determine the influence of non-condensation gas on the thermal performance of a heat pipe. The temperature difference between the evaporation and condensation sections of a single heat pipe and maximum heat capacity are the index of the thermal performance of a heat pipe for a thermal module manufacturer. The thermal performance of a heat pipe with lower temperature difference between the evaporation and condensation sections is better than that of higher temperature difference at the same input power. The results show that the maximum heat capacity reaches the highest point, as the amount of the non-condensation gas of a heat pipe is the lowest value and the temperature difference between evaporation and condensation sections is the smallest one. The temperature difference is under 1°C while the percentage of the non-condensation gas is under 8 × 10−5%, and the heat pipe has the maximum heat capacity.
ACCESSION #
63802014

 

Related Articles

  • THERMAL PERFORMANCE MEASUREMENT OF HEAT PIPE. Nemec, Patrik; Čaja, Alexander; Malcho, Milan // Global Journal of Technology & Optimization;2011, Vol. 2 Issue 1, p1 

    Heat pipe is device working on two phase change of working fluid inside. This phase change of working fluid lead to increasing heat transport efficiency of heat pipe. The basic heat pipe working position is vertical position, when the heat pipe can transport maximal heat flow from evaporator to...

  • Thermal Performance of a Cylindrical Heat Pipe For Different Heat Inputs and Inclination Angles. Idrus, Fairosidi; Mohamad, Nazri; Zailani, Ramlan; Wisnoe, Wirachman; Abdullah, Mohd Zulkifly // Applied Mechanics & Materials;2014, Issue 661-662, p148 

    An experimental study on thermal performance of a copper heat pipe operated with sintered powder wick has been performed. A miniature cylindrical heat pipe with small outer diameter, Ï•10 mm and 300 mm in length, has been chosen in the study. An attempt is also made to design, fabricate and...

  • Features of the determination of the thermal conductivity of graphite at temperatures of 3000-3300 K. Kostanovskii, A.; Kostanovskaya, M.; Zeodinov, M. // Measurement Techniques;Aug2011, Vol. 54 Issue 5, p529 

    The results of an investigation of the thermal conductivity of DE-24 isostatic graphite in the temperature range 3000-3300 K are presented. The temperature dependences of the thermal conductivity are determined by the two hollow cylinders method in which it is assumed that the properties of the...

  • Optimal control of heat conductivity. Lelevkina, L. G.; Sklyar, S. N.; Khlybov, O. S. // Automation & Remote Control;Apr2008, Vol. 69 Issue 4, p654 

    Consideration was given to the problem of optimal control of heat conductivity in the spherical coordinate system under a bounded control action. Proposed was a procedure of numerical solution of this problem based on the Pontryagin method for the distributed-parameter systems, special iterative...

  • Loop Heat Pipe: Simple Thermodynamic. Hamdan, Mohammad; Elnajjar, Emad // International Journal of Mechanical Systems Science & Engineerin;2009, Vol. 1 Issue 2, p111 

    The LHP is a two-phase device with extremely high effective thermal conductivity that utilizes the thermodynamic pressure difference to circulate a cooling fluid. A thermodynamics analytical model is developed to explore different parameters effects on a Loop Heat Pipe (LHP).. The effects of...

  • Vapor condensation on nonisothermal curvilinear fins. Marchuk, I. V.; Glushchuk, A. V.; Kabov, O. A. // Technical Physics Letters;May2006, Vol. 32 Issue 5, p388 

    An analytical expression is obtained for the optimum curvature of a nonisothermal fin featuring stationary condensation of motionless vapor under the conditions of a significant influence of the surface tension on the motion of a condensed liquid. An algorithm is proposed and realized that finds...

  • On Heat Conduction with Phase Change: Accurate Explicit Numerical Method. Sadoun, N.; Si-Ahmed, E. K.; Legrand, J. // Journal of Applied Fluid Mechanics;Jan2012, Vol. 5 Issue 1, p105 

    The one phase Stefan problem is discussed using the Goodman HBI method and an explicit numerical method including modified boundary immobilization scheme. The main advantage of the HBI method lie in the remarkable association of simplicity, flexibility and acceptable accuracy which an error less...

  • NUMERICAL ANALYSIS WITH FINITE AND BOUNDARY ELEMENTS OF THERMAL FIELDS IN STEADY STATE REGIME. Sârbu, Ioan; Popina, Oana // Journal of Engineering & Applied Sciences;2011, Vol. 6 Issue 2, p13 

    Solving the differential equations of heat conduction, the temperature in each point of the body can be determined. However, in the case of bodies with boundary surface of sophisticated geometry no analytical method can be used. In this case the use of numerical methods becomes necessary. The...

  • One Iterative Method for calculating the Thermal Conductivity of Layered soil. Rysbaiuly, Bolatbek; Makhambetova, Gulshat // International Journal of Human Resource Studies (IJHRS);2012, Vol. 2 Issue 2, p18 

    The equation of heat conduction in a heterogeneous environment is being studied. An approximate method was developed for calculating the thermal conductivity of layered soil. Priori estimates were obtained to solve the direct and conjugate problems of difference. We prove the limitation of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics