Point projection radiography with the flexible x-ray imager

Budil, K. S.; Perry, T. S.; Alvarez, S. A.; Hargrove, D.; Mazuch, J. R.; Nikitin, A.; Bell, P.M.
January 1997
Review of Scientific Instruments;Jan1997, Vol. 68 Issue 1, p796
Academic Journal
Discusses improvements made to the technique of point projection radiography to make imaging at high x-ray energies feasible. Use of the flexible x-ray imager developed at the Nova laser facility; Imaging of an expanding aluminum cylinder in flight.


Related Articles

  • A comparison of the response of storage phosphor and film radiography to small variations in X-ray exposure. Hildebolt, C F; Fletcher, G; Yokoyama-Crothers, N; Conover, G L; Vannier, M W // Dentomaxillofacial Radiology;Apr97, Vol. 26 Issue 3, p147 

    Objective: To determine the response to small repeated variations in X-ray exposure of storage phosphor (SP) plates compared with Ektaspeed Plus dental film. Methods: Exposure of SP plates and Ektaspeed Plus dental film was varied within a small range [8.62 µC kg[sup -1] to 9.03 µC kg[sup...

  • A method to extract quantitative information in analyzer-based x-ray phase contrast imaging. Pagot, E.; Cloetens, P.; Fiedler, S.; Bravin, A.; Coan, P.; Baruchel, J.; Härtwig, J.; Thomlinson, W. // Applied Physics Letters;5/19/2003, Vol. 82 Issue 20, p3421 

    Analyzer-based imaging is a powerful phase-sensitive technique that generates improved contrast compared to standard absorption radiography. Combining numerically two images taken on either side at ±½ of the full width at half-maximum (FWHM) of the rocking curve provides images of "pure...

  • Imaging Using Energy Discriminating Radiation Detector Array. Willson, Paul D.; Clajus, Martin; Tümer, Tümay O.; Visser, Gerard; Cajipe, Victoria // AIP Conference Proceedings;2003, Vol. 680 Issue 1, p913 

    Industrial X-ray radiography is often done using a broad band energy source and always a broad band energy detector. There exist several major advantages in the use of narrow band sources and or detectors, one of which is the separation of scattered radiation from primary radiation. ARDEC has...

  • PATIENT DOSE IN DIGITAL PROJECTION RADIOGRAPHY. Compagnone, Gaetano; Pagan, Laura; Casadio Baleni, Massimo; Luca Calzolaio, Felice; Barozzi, Libero; Bergamini, Carlo // Radiation Protection Dosimetry;2008 Special Issue, Vol. 129 Issue 1-3, p135 

    In projection radiography, two types of digital imaging systems are currently available, computed radiography (CR) and direct radiography (DR): a difference between them can be stated in terms of dose and image quality. In the Radiology Emergency Department of our hospital, a flat-panel DR...

  • Evaluating Zn[sub 2] SiO[sub 4] :Mn phosphor for use in medical imaging radiation detectors. Kandarakis, I.; Cavouras, D.; Prassopoulos, P.; Kanellopoulos, E.; Nomicos, C.D.; Panayiotakis, G.S. // Applied Physics A: Materials Science & Processing;1998, Vol. 67 Issue 5, p521 

    Abstract. Zn[sub 2]SiO[sub 4]:Mn phosphor was evaluated for use in radiation detectors of medical imaging systems. Zn[sub 2]SiO[sub 4]:Mn was used in the form of laboratory-prepared fluorescent layers (screens) with coating weights from 18 to 150 mg/cm[sup 2]. The phosphor was excited to...

  • EVALUATION AND TESTING OF COMPUTED RADIOGRAPHY SYSTEMS. Charnock, P.; Connolly, A.; Hughes, D.; Moores, B. M. // Radiation Protection Dosimetry;2005, Vol. 114 Issue 1-3, p201 

    The implementation of film replacement digital radiographic imaging systems throughout Europe is now gathering momentum. Such systems create the foundations for totally digital departments of radiology, since radiographic examinations constitute the most prevalent modality. Although this type of...

  • MEASUREMENT OF THE MODULATION TRANSFER FUNCTION OF DIGITAL X-RAY DETECTORS WITH AN OPAQUE EDGE-TEST DEVICE. Illers, Hartmut; Buhr, Egbert; Günther-Kohfahl, Susanne; Neitzel, Ulrich // Radiation Protection Dosimetry;2005, Vol. 114 Issue 1-3, p214 

    A variant of the edge method for the determination of the pre-sampled modulation transfer function (MTF) of digital X-ray imaging devices has been developed and accepted as the standard method in the novel DQE measurement standard IEC 62220-1. An opaque tungsten edge-test device accomplishes the...

  • THE INFLUENCE OF PATIENT THICKNESS AND IMAGING SYSTEM ON PATIENT DOSE AND PHYSICAL IMAGE QUALITY IN DIGITAL CHEST IMAGING. Ullman, Gustaf; Sandborg, Michael; Dance, David R.; Hunt, Roger; Carlsson, Gudrun Alm // Radiation Protection Dosimetry;2005, Vol. 114 Issue 1-3, p294 

    The aim of this work was to study the influence of patient thickness, tube voltage and image detector on patient dose, contrast and ideal observer signal-to-noise ratio (SNR1), for pathological details positioned at different regions in the image in posterior-anterior (PA) chest radiology. A...

  • Evaluation of Current Dental Radiographs Segmentation Approaches in Computer-aided Applications. Ehsani Rad, Abdolvahab; Mohd Rahim, Mohd Shafry; Rehman, Amjad; Altameem, Ayman; Saba, Tanzila // IETE Technical Review;May/Jun2013, Vol. 30 Issue 3, p210 

    With a wide variety researches on Image segmentation techniques in biomedical and bioinformatics area, it is important to analyze the performance of these approaches in specific problems. Image segmentation is one of the most significant processes of dental X-ray image analysis. Therefore, to...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics