TITLE

An experimental design for microluminescence

AUTHOR(S)
Cruz, J.M.R.; Morais, P.C.; Monte, A.F.G.
PUB. DATE
October 1997
SOURCE
Review of Scientific Instruments;Oct97, Vol. 68 Issue 10, p3890
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes an experimental design for microluminescence based on the optical analysis of a magnified luminescent region. Usefulness of the design for studying the photon transport mechanism in a solid luminescent material; Use of lock-in detection and a liquid-nitrogen-cooled detector to obtain signal-to-noise ratio.
ACCESSION #
627532

 

Related Articles

  • Precise measurement of the resolution in light microscopy using Fourier transform. Vainrub, Arnold // Review of Scientific Instruments;Apr2008, Vol. 79 Issue 4, p046112 

    The resolution power of light microscope has been accurately measured (±5%) by Fourier transform of various object images and further evaluation of the highest spatial frequency in Fourier spectrum. Any unknown shape plane object with a shape feature’s size smaller than the resolution...

  • Analytical thermal lens instrumentation. Franko, Mladen; Tran, Chieu D. // Review of Scientific Instruments;Jan1996, Vol. 67 Issue 1, p1 

    Describes instrumentation developments of the thermal lens techniques. Single beam instruments which were initially developed following dual beam instruments; Differential thermal lens instruments; Multiwavelength and spectral tunable instruments; Circular dichroism spectropolarimeters;...

  • Simulations of neutron focusing with curved mirrors. Copley, J.R.D. // Review of Scientific Instruments;Jan1996, Vol. 67 Issue 1, p188 

    Describes the development of a ray-tracing program to calculate the imaging properties of ellipsoidal and toroidal mirrors in glancing angle configurations. Achievement of increased count rates without sacrificing angular resolution; Instructive examples of calculations for both types of mirrors.

  • On the concentration, focusing, and collimation of x-rays and neutrons using microchannel plates and configurations of holes. Wilkins, Stephen W.; Stevenson, Andrew W.; Nugent, Keith A.; Chapman, Henry; Steenstrup, Stig // Review of Scientific Instruments;Jun89, Vol. 60 Issue 6, p1026 

    A new class of focusing, condensing, and collimating devices for x rays, γ rays, and neutrons is described which is based on the use of microchannel plates (MCPs) or configurations of holes. As well as providing a simple collimating action due to the absorption of severely divergent rays in...

  • Evaluation of a multilayer mirror spectrometer in the 230–304 Ã… wavelength range. Regan, S. P.; Zwicker, A. P.; Finkenthal, M.; Moos, H. W.; Barbee, Troy W. // Review of Scientific Instruments;Oct90, Vol. 61 Issue 10, p2789 

    The reflective properties of a flat Mo/Si multilayer mirror (MLM) optimized for the 230 Å < λ < 304 Å range (2d = 373.2 Å, N = 25, 25 Å < Δλ < 50 Å) have been measured. A nearnormal incidence spectrometer using the MLM as the dispersive element, a beryllium foil as...

  • Steve Schneider Satisloh Maintaining Coolant Levels.  // LabTalk;Mar2007, Vol. 35 Issue 155, p38 

    The article presents tip on maintaining coolant levels. According to the author, the only efficient way to verify that the percentage of coolant to water is appropriate is to use a refractometer. The author adds that improper mixture percentages of coolant to water can decrease the tool life of...

  • TFTR multichannel neutron collimator. Roquemore, A. L.; Chouinard, R. C.; Diesso, M.; Palladino, R.; Strachan, J. D.; Tait, G. D. // Review of Scientific Instruments;Oct90, Vol. 61 Issue 10, p3163 

    The TFTR multichannel neutron collimator provides time-resolved neutron emission profiles from ten vertical chords spaced in major radius across the vacuum vessel. An in situ calibration of the system has been made using a 120 mCi [sup 252]Cf source scanned inside the vacuum vessel. A mapping of...

  • High throughput multilayer mirror based soft x-ray spectrometer for metallic impurity emission from tokamaks. Zwicker, A. P.; Regan, S. P.; Finkenthal, M.; Moos, H. W. // Review of Scientific Instruments;Oct90, Vol. 61 Issue 10, p2786 

    A near-normal incidence high throughput spectrometer with a flat multilayer mirror (MLM) as the dispersive element has been built and operated on the Texas Experimental Tokamak (TEXT). Using a Mo/B[sub 4]C MLM that has a reflectivity of 20-30% and a bandpass of 4-9 Ã… (FWHM), the instrument...

  • Optical pens.  // Laser Focus World;Jun2006, Vol. 42 Issue 6, p147 

    The article introduces the modular confocal, chromatic optical pens from Micro Photonics in Irvine, California. It can be used for profilometry, microtopography and other measurements allow for 30 configurations with five magnifiers with focal lengths from 3.3 to 29 mm and six chromatic lenses...

Share

Read the Article

Courtesy of

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics