TITLE

Mark I Gun Carrier

AUTHOR(S)
Guttman, Jon
PUB. DATE
September 2011
SOURCE
Military History;Sep2011, Vol. 28 Issue 3, p25
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article considers the Mark I gun carrier used by British armed forces in World War I, noting its status as the first tracked, self-propelled artillery in military history.
ACCESSION #
62665012

 

Related Articles

  • Brassey's Artillery of the World (Book).  // Library Journal;6/1/1977, Vol. 102 Issue 11, p1295 

    Reviews the book 'Brassey's Artillery of the World,' compiled by brian Blunt and Tolley Taylor, edited by Shelford Bidwell.

  • Untitled.  // Military Technology;2011, Vol. 35 Issue 5, p95 

    A photograph of the self-propelled artillery supplied by Elbit Systems Ltd. is presented.

  • CLEAN SLIP RING IN SEGMENTS.  // PS: Preventive Maintenance Monthly;Apr2011, Issue 701, p9 

    The article offers step-by-step instructions for cleaning the segment board of slip rings in an M109A6 Paladin self-propelled artillery vehicles.

  • Design of Controlled Fire Extinguisher Filling Pretreatment Equipment of Self-propelled Artillery. Liao Xuebing; Zhao Haiyan; Peng Lei; Huang Lijuan // Applied Mechanics & Materials;2014, Issue 543-547, p1483 

    According to the technical requirements of controlled fire extinguisher filling pretreatment of self-propelled artillery, in this paper, we use the method of principles tunnel to control the air flow, combined with multi-parameter self-tuning fuzzy PID control, different models of controlled...

  • Whole Trajectory Design Optimization of Self-propelled Artillery Based on Adaptive Genetic Algorithm. Fuqiang NIU; Cheng XU; Xiao XIAO // Advanced Materials Research;2014, Vol. 971-973, p1391 

    An optimization design method of whole trajectory for a self-propelled artillery, including interior, exterior and terminal ballistic trajectory, is proposed. The structural parameters of the projectile, ballistic parameters, charge weight and explosive weight are selected as the design...

  • Research of ADRC in Application to the Servo System of Self-propelled Gun. Peng Lei; Xuebing Liao; Linhao Huang; Changhong Gong // Applied Mechanics & Materials;2014, Vol. 713-715, p730 

    Aiming at the problems of disturbance, coupling and fluctuation of load existing in permanent magnet synchronous motor(PMSM),which is used in the servo system of self-propelled gun, the auto disturbance rejection control technique(ADRC) is introduced into in the servo system of self-propelled...

  • IDENTIFICATION OF LOADING PROCESS BASED ON HYDRAULIC PRESSURE SIGNAL. Polak, Marta; Stefaniak, Paweł; Zimroz, Radosław; Wyłomańska, Agnieszka; Śliwiński, Paweł; Andrzejewski, Marek // Proceedings of the International Multidisciplinary Scientific Ge;2016, Vol. 2, p459 

    One of the indicators of work efficiency in copper ore mines is the number of cycles during the shift performed by self-propelled machine called loader. Its cycle of work can be divided into four basic operation regimes: loading ore at the bucket, haulage to the dumping point, unloading and...

  • REMOVE BROKEN SKIRT BOLTS WITH EASE.  // PS: Preventive Maintenance Monthly;Oct2004, Issue 623, p6 

    The article advises crewmen to be cautious while removing broken skirt bracket bolts. Crewmen must take care of the skirt bracket bolts, NSN 5305-00-724-7222, on Bradley. Those skirts are very heavy. So if even one of the bolts vibrates loose, a lot of pressure is put on the remaining ones. They...

  • ARE ARSS MOUNTED RIGHT?  // PS: Preventive Maintenance Monthly;Oct2004, Issue 623, p14 

    The article presents information about correct installation of the M4 adapter rail system (ARS). Both the M4 and M5 ARS use a rear clamp with a screw and a forward leaf spring to secure the upper rail to the M4/M4A1 or M16A4. The clamp must straddle the gas tube just forward of either weapon's...

  • HOW MANY DRIPS?  // PS: Preventive Maintenance Monthly;May2006, Issue 642, p9 

    The article offers tips on how to determine leak problems on the elevation cylinder of an M109A6 Paladin vehicle. The number of oil drops coming from the two vent holes determines whether or not the cylinder has a problem. To check the problem, a crewman needs to elevate and depress the cannon....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics