TITLE

15A DC/DC module

PUB. DATE
October 2010
SOURCE
EDN Europe;Oct2010, Vol. 57 Issue 10, p1
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
The article offers brief information on LTM4627 a 15 ampere direct current to direct current voltage regulator.
ACCESSION #
61228666

 

Related Articles

  • Use a TL431 shunt regulator to limit high ac input voltage. Arsenov, Todor // EDN;10/25/2007, Vol. 52 Issue 22, p69 

    The article explores the use of TL431 shunt regulator to limit high alternating current (AC) input voltage. Using input-limiting circuits enables the user to increase the input voltage to 440V root-mean-square (rms) without affecting the power supply components. A diagram is presented that shows...

  • 35A Mosfets for mobile processors.  // Electronics Weekly;7/12/2006, Issue 2249, p29 

    This article presents information on the IRF7835PbF and IRF7836PbF, 30V synchronous buck HEXFET Mosfets for DC-DC synchronous point-of-load converters from International Rectifier Corp. They target the latest generation of mobile processors requiring a thermal design current of 35A from a...

  • Secondary-Side Synchronous PWM Controller.  // Power Electronics Technology;Jun2004, Vol. 30 Issue 6, p10 

    Focuses on Texas Instruments Inc.'s UCC2540 secondary-side synchronous buck pulsed width modulation (PWM) controllers. Bias-voltage range and supply tracking function of the controllers; Voltage-mode control; Metal oxide semiconductor field-effect transistors of the PWM controllers; Electric...

  • SPICE Model Supports LDO Regulator Designs. Sandler, Steven; Hymowitz, Charles E. // Power Electronics Technology;May2005, Vol. 31 Issue 5, p26 

    Reports on the use of SPICE models of power MOSFET (metal oxide semiconductor field-effect transistors) in applications such as low dropout regulator designs. Development of a design of a low-dropout voltage regulator using a power MOSFET as the series pass element; Discovery of inadequacies in...

  • Improving the Performance of Flyback Power Supplies. Hancock, Jon Mark // Power Electronics Technology;Sep2005, Vol. 31 Issue 9, p33 

    Reports that innovative metal oxide semiconductor field-effect transistors and flyback controllers help designers meet challenging efficiency and power density requirements, while also satisfying demands for reliability and low cost. Investigation of how to satisfy conflicting requirements for...

  • Back-gated MOSFETs with controlled silicon thickness for adaptive threshold-voltage control. Avci, U.; Tiwari, S. // Electronics Letters;1/8/2004, Vol. 40 Issue 1, p74 

    Experimental results for back-gated thin silicon transistors that allow adaptive threshold-voltage control and exhibit low drain-induced barrier-lowering due to improved electrostatics of the geometry are reported. The implementation of the back-gate is achieved by a low-temperature bonding...

  • New Processors Will Require New Powering Technologies. Stanford, Edward // Power Electronics Technology;Feb2002, Vol. 28 Issue 2, p32 

    Discusses the need for high performance voltage regulators to power future generations of microprocessors. Trends in the semiconductor fabrication technology; Factors affecting the design of voltage regulators; Regulator performance; Losses associated with the switching of power metal oxide...

  • Polycrystalline silicon/metal stacked gate for threshold voltage control in metal-oxide-semiconductor field-effect transistors. Polishchuk, Igor; Hu, Chenming // Applied Physics Letters;4/3/2000, Vol. 76 Issue 14 

    A stack structure for the gate electrode of metal-oxide-semiconductor (MOS) transistors is proposed, analyzed, and simulated. The stack consists of a very thin polycrystalline silicon (polysilicon) layer and metal. By changing the thickness of the polysilicon layer, one can change the effective...

  • FPGA adds ADC to yield mixed-signal single chip. Prophet, Graham // EDN Europe;Jan2006, Vol. 51 Issue 1, p20 

    The article focuses on a chip designed by Actel Corp. in which the company has integrated a block of its pASIC-3 flash FPGA along with an A/D converter, analogue inputs and MOSFET output drivers, further flash memory and additional analogue functions. With the chip one can build a complete...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics