Cyclic bend tests for the reliability evaluation of printed circuit boards under dynamic loads

Fuchs, P. F.; Major, Z.
January 2011
Frattura e Integrita Strutturale;2011, Issue 15, p64
Academic Journal
No abstract available.


Related Articles

  • Bending fatigue characteristics of wire rope. Kim, Sung; Bae, Rjeon; Kwon, Jae // Journal of Mechanical Science & Technology;Jul2012, Vol. 26 Issue 7, p2107 

    Wire rope in elevators can become disconnected by tensile stress from friction between the rope and sheave, and by repeated stress including bending stress from various effects formed during contact between the rope and sheave. It is known that in designing wire rope, its strength is affected...

  • Fatigue Life Increasing Method for Cyclically Bent Threaded Connection. Krenevičius, A.; Juchnevičius, Ž.; Šukšta, M.; Selivonec, J. // Mechanika;2011 Conference Issue, p187 

    To realize the method for fatigue life increasing the mutual position of the threaded connection and its bending plane must be changed periodically during the servise life. This possibility is examined by using the law of the load distribution in thread of bent threaded connection and the...

  • Mixed-mode Testing for an Asymmetric Four-point Bending Configuration of Polyurethane Foams. Apostol, Dragos Alexandru; Constantinescu, Dan Mihai; Marsavina, Liviu; Linul, Emanoil // Applied Mechanics & Materials;2015, Vol. 760, p239 

    Many efforts have been made recently to determine the fracture toughness of different types of foams in static and dynamic loading conditions. Taking into account that there is no standard method for the experimental determination of the fracture toughness of plastic foams, different procedures...

  • Development of in-situ fatigue crack observing system for rotating bending fatigue testing machine. Lian, B.; Ueno, A.; Iwashita, T. // Frattura e Integrita Strutturale;2016, Issue 35, p389 

    To substitute for a traditional replication technique, an in-situ fatigue crack observing system for rotating bending testing machine has been newly developed. For verifying performance of this observing system, fatigue tests were carried out by using fatigue specimen having a small artificial...

  • A Novel Impact Test Rig for Hydraulic Prop. Xin Zhang; Jianwu Zhang; Jihua Bao; Meng Zang // Advances in Information Sciences & Service Sciences;Nov2011, Vol. 3 Issue 10, p409 

    Hydraulic prop is the key power component of support system in the coalface, which can bear the impact by unloaded yielding. Its work characteristic directly affects reliability of support system, safety of coalface and efficiency of mining. The paper presents a novel impact test rig for...

  • Design Optimization Of Cnc Verticalmilling Machine Bed. Swami, B. Malleswara; Kumar, K. Sunil Ratna; Ramakrishna, Ch. // Indian Streams Research Journal;Aug2012, Vol. 2 Issue 7, Special section p1 

    In this paper , a machine bed (Manufacturer: M/s Lokesh Machine Tools Ltd) is selected for the complete analysis for both static and dynamic loads. Then investigation is carried out to reduce the weight of the machine bed without deteriorating its structural rigidity and the accuracy of the...

  • Whistling Past the Boneyard. BOGUSKI, ROBERT // Printed Circuit Design & Fab: Circuits Assembly;Sep2015, p49 

    The article discusses the resurrection of bonepiles, or those printed circuit boards (PCB) that failed functional or system test after production, or in the field while under warranty. Topics covered include the preparation of documentation and data files for developing test programs, securing a...

  • Method Research on Bending Fatigue Test of Vehicle Steering Wheel. Xunjiong Xu; Liang Tian // Advanced Materials Research;7/24/2014, Vol. 989-994, p3029 

    Through researches a new method of bending fatigue test of vehicle steering wheel was raised in this paper. The new method is closer to the actual using condition of vehicle steering wheel, which enhances the reliability of the test.

  • Influence of the Fillet Root Surface Treatment on Bending Fatigue Test Results of the Hardened Gears. Jonšta, Petr; Maršálek, Petr; Havlík, Jiří; Jonšta, Zdenek // Key Engineering Materials;2014, Vol. 586, p154 

    This article deals with testing of fatigue properties of hardened gears at bending. These tests are defined by the ISO 6336 - method B standard, when testing is carried out under reference conditions close to the real operation. This type of testing may be helpful to evaluate the influence of...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics