TITLE

Carbon nanotubules: morphology and properties

AUTHOR(S)
Mikhalchan, A.; Lysenko, V.; Muradova, N.; Zhiteneva, D.; Saklakova, E.; Lysenko, A.
PUB. DATE
March 2011
SOURCE
Fibre Chemistry;Mar2011, Vol. 42 Issue 5, p287
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The morphology and sorption characteristics of carbon nanotubules of different types were investigated. Experiments were conducted on separating individual carbon nanotubules from agglomerates with mechanical, electric arc, and ultrasound effects. Fractionation of suspensions of nanotubules combined with ultrasound treatment is the most promising. The effect of the chemical composition of the surface of carbon nanotubules on their electrical properties was demonstrated. Composite film materials with resistivity of 15.10 at a 0.5 wt. % degree of filling were obtained from fluoroplastic F-2M and carbon nanotubules CNT-6.
ACCESSION #
60821744

 

Related Articles

  • Adhesion to Bovine Dentin--Surface Characterization. RUSE, N. D.; SMITH, D. C. // Journal of Dental Research;Jun1991, Vol. 70 Issue 6, p1002 

    X-ray photo-electron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) were used to characterize the dentin surface, to determine the effects of different pre-conditioning procedures on the elemental composition of the dentin surface, and to investigate the interaction between dentin...

  • Structure and composition of zirconium carbide thin-film grown by ion beam sputtering for optical applications. Singh, Amol; Modi, Mohammed H.; Dhawan, Rajnish; Lodha, G. S. // AIP Conference Proceedings;2014, Vol. 1591, p869 

    Thin film of compound material ZrC was deposited on Si (100) wafer using ion beam sputtering method. The deposition was carried out at room temperature and at base pressure of 3×10-5 Pa. X-ray photoelectron spectroscopy (XPS) measurements were performed for determining the surface chemical...

  • Superconductivity in Ca10(Ir4As8)(Fe2As2)5 with Square-Planar Coordination of Iridium. Kazutaka Kudo; Daisuke Mitsuoka; Masaya Takasuga; Yuki Sugiyama; Kento Sugawara; Naoyuki Katayama; Hiroshi Sawa; Hiroaki S. Kubo; Kenta Takamori; Masanori Ichioka; Tatsuo Fujii; Takashi Mizokawa; Minoru Nohara // Scientific Reports;11/1/2013, p1 

    We report the unprecedented square-planar coordination of iridium in the iron iridium arsenide Ca10(Ir4As8)(Fe2As2)5 . This material experiences superconductivity at 16 K. X-ray photoemission spectroscopy and first-principles band calculation suggest Ir(II) oxidation state, which yields...

  • Simultaneous purification and functionalization of carbon nanotubes using chlorination. Pełech, Iwona; Narkiewicz, Urszula; Moszyński, Dariusz; Pełech, Robert // Journal of Materials Research;Dec2012, Vol. 27 Issue 18, p2368 

    Multiwalled carbon nanotubes (MWCNTs) obtained using ethylene as a carbon source and nanocrystalline iron as a catalyst were used as the initial material. The functionalization of MWCNTs was carried out using chlorine in the liquid and gas phase. In the second case, the reaction was conducted in...

  • Characterization of Multiple Functional Solid Line of Graphite Ink Surface Printed by Micro-Flexographic. Maksud, M. I.; Yusof, M. S.; Embong, Z. // Applied Mechanics & Materials;2015, Vol. 752-753, p1379 

    The purpose of this paper is to study a ink surface morphology, quantify the chemical composition involved in processing of carbon ink printed by flexographic printing. The methodology is to use surface sensitive technique, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM)...

  • Surface electronic structure of nitrogen-doped semiconducting single-walled carbon nanotube networks. Ran Park, Young; Jae Ko, Min; Song, Yoon-Ho; Jin Lee, Cheol // Journal of Applied Physics;Oct2013, Vol. 114 Issue 15, p153516 

    We investigated the effects of vacuum annealing on the surface electronic structure and the work function of single-walled carbon nanotubes (SWCNTs). We changed the doping type of semiconducting single-walled carbon nanotubes (semi-SWCNTs) from p-type to n-type, and investigated their optical...

  • Surface Chemistry Effects of Topographic Modification of Titanium Dental Implant Surfaces: 1. Surface Analysis. Morra, Marco; Cassinelli, Clara; Bruzzone, Giuseppe; Carpi, Angelo; Santi, Giuseppe Di; Giardino, Roberto; Fini, Milena // International Journal of Oral & Maxillofacial Implants;Jan/Feb2003, Vol. 18 Issue 1, p40 

    Purpose: To analyze the surface composition of 34 different commercially available titanium dental implants. Materials and Methods: Surface composition was evaluated by x-ray photoelectron spectroscopy (XPS). Samples were divided into 4 groups, depending on their surface topography (machined,...

  • Formaldehyde removal by Rayon-based activated carbon fibers modified by P-aminobenzoic acid. Haiqin Rong; Zhenyu Liu; Qilin Wu; Ding Pan; Jingtang Zheng // Cellulose;Feb2010, Vol. 17 Issue 1, p205 

    We impregnated Rayon-based activated carbon fibers (ACFs) by p-aminobenzoic acid (PABA) and systematically investigated their porous structure, surface chemistry, and formaldehyde removal behavior. Using standard nitrogen adsorption analysis, we found that the specific surface area, the...

  • Effect of Surface Properties of T800 Carbon Fibers on Epoxy /Fiber Interface Adhesion. Li-li Wang; Peng Li; Ling-cong Li; Yun-hua Yu; Xiao-ping Yang // Polymers & Polymer Composites;2013, Vol. 21 Issue 9, p607 

    The purpose of this paper is to study the effect of surface properties of domestic sized-T800 carbon fibers on the epoxy/fiber interfacial adhesion by comparing with Toray sized-T800 carbon fibers. Surface chemistry analysis of the fibers was carried out by using X-ray photoelectron spectroscopy...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics