TITLE

Modelling of CZT strip detectors

AUTHOR(S)
Kalemci, E.; Matteson, J. L.; Skelton, R. T.; Hink, P.; Slavis, K.
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 510 Issue 1, p769
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Position-sensitive CZT detectors for astrophysical research in the five-several hundred keV range are being developed at UCSD and WU. These can be used for large area detector arrays in coded mask imagers and small-area focal plane detectors for focusing X-ray telescopes. The detectors have crossed-strip readout and optimized strip widths and gaps to improve energy resolution. A model of charge drift in the detectors and charge induction on the electrodes has been developed to allow for a better understanding of these types of detectors and to improve their design. The model is described and its predictions are compared with laboratory measurements. In general, there is good agreement between the model and the measurements. © 2000 American Institute of Physics.
ACCESSION #
6029686

 

Related Articles

  • Effects of intensity and position modulation on switched electrode electronics beam position monitor systems at Jefferson Lab. Powers, Tom // AIP Conference Proceedings;2000, Vol. 546 Issue 1, p541 

    Two types of switched electrode electronics beam position monitors are in use at Jefferson Lab. Together they provide accurate beam position to the control system for beam intensities between 50 nA and 2 mA. One version, called the linac style, has a switching frequency of 125 kHz. The other,...

  • The Design and Experiment of a Two-dimensional Position Sensitive Detecting (PSD) sensor Based on Avalanche Breakdown. Yuanyuan Shan; Ming Qin; Shengqi Chen // Key Engineering Materials;2014, Vol. 609-610, p1094 

    A two-dimensional position sensitive detecting sensor (PSD) based on avalanche breakdown is introduced in this paper. The structure of the sensor is designed under the assumption that the breakdown of the PN junction in the sensor occurs at the bottom of the PN junction. The breakdown structure...

  • Optical sensor may help robots feel.  // Machine Design;2/23/95, Vol. 67 Issue 4, p42 

    Examines the potential of a prototype optical position sensor as a more reliable replacement for potentiometers. Application as tactile sensor for robots due to its compactness; Replacement of the light pipes with fiber optic cables to shrink the sensor; Advantage over potentiometers.

  • Electron detection by resistive charge division based position sensitive detectors. Ra¨isa¨nen, J.; Harju, O.; Tjurin, G.; Riihima¨ki, I.; Lindholm, L. // Review of Scientific Instruments;Dec2001, Vol. 72 Issue 12, p4358 

    The use of resistive charge division based solid-state detectors for position sensing of electrons has been studied. The operational conditions having importance for device performance are considered for one- and two-dimensional detectors manufactured by SiTek®. The parameter of main interest...

  • Low noise position sensitive detector for optical probe beam deflection measurements. Spear, Jonathan D.; Russo, Richard E. // Review of Scientific Instruments;Jul96, Vol. 67 Issue 7, p2481 

    Reports on the design of an optical position sensor that uses discrete photodiodes electrically connected in parallel, with opposing polarities. Restriction of the acceptance angle of the detector; Response of the device to displacements of an optical spot; Measurements by the sensor of the...

  • Position sensitive sensors provide background suppression.  // Environmental Engineering;Mar98, Vol. 11 Issue 1, p35 

    Provides information on the D1 series of triangular photoelectric sensors from Matsushita Automation Controls. Use of a position sensitive device for the sensors; Self-diagnosis function of the sensors.

  • Capacitive sensor for micropositioning in two dimensions Kolb, P. W.; Kolb, P.W.; Decca, R. S.; Decca, R.S.; Drew, H. D.; Drew, H.D. // Review of Scientific Instruments;Jan1998, Vol. 69 Issue 1, p310 

    Develops a capacitive sensor for micropositioning in two dimensions. Principles of the sensing operation; Compatibility with high magnetic field and cryogenic temperature; Effect of electronics used on positioning resolution; Factors limiting the position reproducibility.

  • Radiation position-sensitive detector based on plastic scintillating fibers. Ikhlef, A.; Skowronek, M. // Review of Scientific Instruments;Sep93, Vol. 64 Issue 9, p2566 

    The applicability of plastic scintillation fibers as a radiation position detector is evaluated for low-energy x-ray irradiation. A continuous x-ray generator with a copper anode is used as a source radiating very intense lines: K[sub α2]=8.02 keV, K[sub α1] = 8.04 keV, K[sub β1] = 8.9...

  • Method for fabricating a simple low-cost position-sensitive photodetector. Burns, Michael J. // Review of Scientific Instruments;Mar89, Vol. 60 Issue 3, p327 

    We describe a very simple method for making a low-cost wide-band position-sensitive photodetector (PSD) and preamplifier circuit. The detector is most suitable for experiments where a laser is used to measure the deflection (linear or angular) of some part of the experimental apparatus. The...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics