TITLE

Ultrasonic monitoring of texture in aluminum alloy during annealing

AUTHOR(S)
Liu, Guizhong; Rehbein, D. K.; Foley, James C.; Thompson, R. B.
PUB. DATE
May 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 509 Issue 1, p1653
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents the measurement results of texture in an aluminum-magnesium alloy (Al5xxx) during annealing. The long term strategy is to gather information of texture and microstructure using in-situ ultrasonic measurement and to control the hot rolling process. The texture is characterized in terms of three orientation distribution coefficients (ODCs), i.e., W400, W420, and W440, which are inferred from ultrasonic velocity measurements. The electromagnetic-acoustic transducers (EMAT) are used to measure those quantitities because of their non-contact characteristics. We reported the preliminary results on the last year’s QNDE conference in Snowbird, Utah. The progress and recent measurement results are included in this paper.—Ames Laboratory is operated for the U.S. Department of Energy by Iowa State University under Contract W-7405-ENG-82. This work was supported by the Office of Basic Energy Sciences as a part of the Center of Excellence of the Synthesis and Processing of Advanced Materials. © 2000 American Institute of Physics.
ACCESSION #
6029207

 

Related Articles

  • Effect of Powerful Current Pulses on the Structure and Mechanical Properties of the Aluminum Alloy Al-6%Mg-0.6%Mn. Valeev, I. Sh.; Barykin, N. P.; Trifonov, V. G.; Valeeva, A. Kh. // Journal of Materials Engineering & Performance;Apr2005, Vol. 14 Issue 2, p236 

    Changes in the microstructure and mechanical properties of commercial aluminum alloy Al-6%Mg0.6%Mn after recrystallization have been studied. This alloy was recrystallized by two methods: annealing in air at temperatures of 250 to 450 °C for 20 min in an electrical resistance furnace; and...

  • Degradation of the structure of specimens of the intermetallide Ni[sub 3]Al obtained by self-propagating high-temperature synthesis. Marvina, L. A.; Marvin, V. B. // Technical Physics;Jan97, Vol. 42 Issue 1, p49 

    Specimens of Ni[sub 3]Al obtained by self-propagating high-temperature synthesis (SHS) are subjected to an experimental study of the influence of the structural homogeneity on the recrystallization under conditions of diffusional contact with steel at T = 1473 K. It is found that the...

  • Genesis of the structure and the phase and elemental compositions of an aluminum oxide catalyst in the isomerization process of n-butylenes. Lamberov, A. A.; Basheva, I. A.; Sitnikova, E. Yu.; Aptikasheva, A. G.; Gil'manov, Kh. Kh.; Egorova, S. R.; Kamalov, B. A. // Theoretical Foundations of Chemical Engineering;Oct2009, Vol. 43 Issue 5, p752 

    An investigation of the changes in the characteristics of the porous structure, phase, and elemental compositions of catalyst samples for the isomerization of n-butylenes using a set of physicochemical methods has been conducted. In has been established that under hydrothermal conditions of the...

  • Effects of the synthesis of intermetallic compounds on the growth and consolidation of detonation diamond nanocrystals. Plotnikov, V. A.; Dem'yanov, B. F.; Makarov, S. V. // Technical Physics Letters;Oct2009, Vol. 35 Issue 10, p933 

    The synthesis of intermetallic compounds belonging to the nickel-aluminum system in the presence of detonation nanodiamond (DND) particles leads to a significant change in the structure of consolidated nanocrystals. The broadening of (111), (220), and (311) X-ray diffraction reflections usually...

  • The evolution of texture and deformation anisotropy at an equal channel extruded aluminum 1050 alloy. Sussai, W. R.; Bolmaro, R. E.; Kliauga, A. M. // Materials Science Forum;2014, Vol. 783-786, p192 

    The aim of this work was to analyze the evolution of texture and the deformation anisotropy of a AA1050 after ECAP and further recrystallization. The initial material was processed by two different routes: the first set of samples came from a hot rolled band with a mixture of cube, copper and...

  • Accuracy of measurement of thickness of a 6061 aluminum sample at 1-mm lift off. Schmidt, W. F.; Zinke, O. H. // AIP Conference Proceedings;2002, Vol. 615 Issue 1, p1757 

    The accuracy of measurement of a 0.51-mm thick, 6061 aluminum sample under lift-off variations of 0.25 mm at 1.08 is shown to be 5 percent by means of a complex-reluctance plane analysis. The analysis is shown to depend critically on the statistical accuracy of such measurements. Large lift-off...

  • Theoretical Aspects of Linear and Non-Linear Guided Wave Propagation in Rolled Aluminum Sheets. Price, D. C.; Scott, D. A. // AIP Conference Proceedings;2003, Vol. 657 Issue 1, p1567 

    Despite the strongly dispersive nature of guided wave propagation in isotropic planar waveguides, it is shown that material non-linearity can result in the generation of propagating harmonics at points in the guided wave spectrum where the dispersion curves of all three orthogonal modes...

  • Modeling Recrystallization Kinetics in AA1050 Following Simulated Breakdown Rolling. Chen, S. P.; Van der Zwaag, S. // Metallurgical & Materials Transactions. Part A;Sep2006, Vol. 37 Issue 9, p2859 

    A physical model based on the single grain approach is refined to predict the recrystallization kinetics of a single-phase alloy following hot deformation. The model involves the original and deformed grain geometry, the characteristics of the dislocation networks formed during deformation, and...

  • Precipitation and Grain Refinement in a 2195 AI Friction Stir Weld. Fonda, R. W.; Bingert, J. F. // Metallurgical & Materials Transactions. Part A;Dec2006, Vol. 37 Issue 12, p3593 

    The microstructure across a friction stir weld in aluminum alloy 2195 was analyzed to reveal the precipitation processes, grain evolution mechanisms, and crystallographic texture within that weld. The complex microhardness variations across the weld are explained by the observed precipitation...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics