Inverse problems in eddy current testing using neural network

Yusa, N.; Cheng, W.; Miya, K.
May 2000
AIP Conference Proceedings;2000, Vol. 509 Issue 1, p549
Academic Journal
Reconstruction of crack in conductive material is one of the most important issues in the field of eddy current testing. Although many attempts to reconstruct cracks have been made, most of them deal with only artificial cracks machined with electro-discharge. However, in the case of natural cracks like stress corrosion cracking or inter-granular attack, there must be contact region and therefore their conductivity is not necessarily zero. In this study, an attempt to reconstruct natural cracks using neural network is presented. The neural network was trained through numerical simulated data obtained by the fast forward solver that calculated unflawed potential data a priori to save computational time. The solver is based on A-&fgr; method discretized by using FEM-BEM A natural crack was modeled as an area whose conductivity was less than that of a specimen. The distribution of conductivity in that area was reconstructed as well. It took much time to train the network, but the speed of reconstruction was extremely fast after once it was trained. Well-trained network gave good reconstruction result. © 2000 American Institute of Physics.


Related Articles

  • Fast algorithms for crack simulation and identification in eddy current testing. Albanese, R.; Rubinacci, G.; Tamburrino, A.; Villone, F. // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p505 

    Examines simulation and identification of cracks in eddy current testing for general purpose electromagnetic analysis. Imposition of the electric constitutive equation; Evaluation of the magnetic signal for given shape of the flaw; Determination of the modified eddy current pattern.

  • Eddy current monitoring of fatigue crack growth in Zr-2.5% Nb pressure tube. Krause, T. W.; Martin, A. E.; Sheppard, R. R.; Schankula, J. J. // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p457 

    Zr-2.5% wt. Nb pressure tubes (PTs) form the core of the heat transport system in CANDU nuclear reactors. These 6 m long, 100 mm diameter tubes are operated at elevated temperatures (nominally 300 °C) and at pressures that produce hoop stresses that are 25% of the ultimate tensile strength of...

  • Inversion of open cracks using eddy-current probe impedance measurements. Bowler, J. R. // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p529 

    Crack profiles have been estimated by the inversion of eddy-current probe impedance data. In the calculations, the direct problem is solved numerically to obtain predictions of impedance. A penalty function is constructed quantifying the overall difference between predictions and measurements....

  • Distribution of eddy current along an ideal surface crack. Liaw, J. W.; Chu, S. L.; Kuo, M. K.; Yeh, C. S. // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p417 

    In this paper, a set of integral equations is derived systematically for the eddy current interacting with an ideal surface crack. An auxiliary surface integral equation is derived particularly for further determining the currents on both sides of the crack. These integral equations are solved...

  • A novel crack reconstruction method for steam generator tube ECT with noise sources outside. Huang, Haoyu; Takagi, Toshiyuki; Fukutomi, Hiroyuki // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p513 

    In eddy current testing of steam generator tubes, the signals obtained are always noised by many factors because of the complex environment. Some of these noise factors are caused by the support plates, the expansion part of the tube and the tube sheets outside. Previous works show that the...

  • Eddy current array probe for corrosion mapping on ageing aircraft. Leclerc, Re´mi; Samson, Rock // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p489 

    The life of an airplane in the civil and military fleet is expanding by many years. The corrosion on aircraft is becoming a serious problem. The corrosion can also lead to the development of “multi-site damage” (MSD) and catastrophic failure. The need for a fast and reliable...

  • Eddy current imager based on bobbin-type hall sensor arrays for nondestructive evaluation in small-bore piping system. Jun, Jongwoo; Lee, Jinyi; Kim, Jungmin; Le, Minhhuy; Lee, Sehoon // AIP Conference Proceedings;Jan2013, Vol. 1511 Issue 1, p502 

    A bobbin coil with bobbin-type solid-state Hall sensor arrays was proposed for eddy current testing. A 32×32 matrix of InSb Hall sensors was set on a cylinder 15 mm in diameter and 25 mm long. The distorted alternating magnetic fields around inner diameter (ID) and outer-diameter stress...

  • Natural Crack Sizing Based on Eddy Current Image and Electromagnetic Field Analyses. Endo, H.; Uchimoto, T.; Takagi, T.; Nishimizu, A.; Koike, M.; Matsui, T. // AIP Conference Proceedings;2006, Vol. 820 Issue 1, p720 

    An eddy current testing (ECT) system with multi-coil type probes is applied to size up cracks fabricated on austenite stainless plates. We have developed muti-channel ECT system to produce data as digital images. The probes consist of transmit-receive type sensors as elements to classify crack...

  • Conformable Eddy Current Array Delivery. Summan, Rahul; Pierce, Gareth; Macleod, Charles; Mineo, Carmelo; Riise, Jonathan; Morozov, Maxim; Dobie, Gordon; Bolton, Gary; Raude, Angélique; Dalpé, Colombe; Braumann, Johannes // AIP Conference Proceedings;2016, Vol. 1706 Issue 1, p1 

    The external surface of stainless steel containers used for the interim storage of nuclear material may be subject to Atmospherically Induced Stress Corrosion Cracking (AISCC). The inspection of such containers poses a significant challenge due to the large quantities involved; therefore,...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics