TITLE

Dynamic infrared imaging of crush tests of composite tubes

AUTHOR(S)
Han, Xiaoyan; Favro, L. D.; Thomas, R. L.; Chadwick, M.; Caliskan, A.; Griffith, N.
PUB. DATE
May 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 509 Issue 1, p621
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We will describe fast infrared imaging of both static and dynamic crush tests on glass-fiber composite tubes. The results are compared with simultaneous high-speed video images of the same tests, and with microscopy following the tests.—This work is supported in part by the Institute for Manufacturing Research, Wayne State University. © 2000 American Institute of Physics.
ACCESSION #
6029072

 

Related Articles

  • Incorporating interlaminar fracture mechanics into design. Martin, R H // Proceedings of the Institution of Mechanical Engineers -- Part L;2000, Vol. 214 Issue 2, p91 

    In laminated composite structures, interlaminar failures or delaminations have continued to be a predominant life-limiting failure mode. The main concern for designers has focused on the damage tolerance of structures in the presence of delamination damage from impact events. The design approach...

  • Yield surfaces for anisotropic plates. Walker, J. D.; Thacker, B. H. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p567 

    Aerospace systems are incorporating composite materials into their structures. The composite materials are often anisotropic in mechanical response due to their geometric layout. For many years, the failure surfaces of anisotropic materials were thought to be characterizable by a quadratic...

  • Infrared technology for measuring the effect of fire on materials.  // Advanced Materials & Processes;Feb2012, Vol. 170 Issue 2, p6 

    The article reports on research regarding the use of an infrared camera to measure the temperature of flame and process images to analyze the resistance of various composite materials to fire.

  • Influence of Interphase Imperfection on Micro-Crack Behavior in Polymer Composites Filled by Rigid Particles. Majer, Zdenĕk; Náhlík, Luboš // Key Engineering Materials;2014, Vol. 586, p194 

    In this paper a particulate composites with polypropylene matrix and rigid mineral fillers are studied. The polymer particulate composites are frequently used in many engineering applications. Due to the physical and chemical interaction between matrix and particles a third phase (generally...

  • Discrete meso-element simulation of the failure behavior of short-fiber composites under dynamic loading. Liu, Wenyan; Tang, Z. P.; Liu, Yunxin // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p325 

    In recent years, more attention has been paid to a better understanding of the failure behavior and mechanism of heterogeneous materials at the meso-scale level. In this paper, the crack initiation and development in epoxy composites reinforced with short steel fibers under dynamic loading were...

  • Comparative analysis of optical and ultrasonic stimulation of flaws in composite materials. Vavilov, V. P.; Nesteruk, D. A. // Russian Journal of Nondestructive Testing;Feb2010, Vol. 46 Issue 2, p147 

    The papers on ultrasonic infrared thermography are briefly reviewed. The results of comparative experimental investigations of composite-material specimens subjected to ultrasonic and optical stimulation are described.

  • Defect detection capability of pulsed transient thermography. Quek, S.; Almond, D. P. // Insight: Non-Destructive Testing & Condition Monitoring;Apr2005, Vol. 47 Issue 4, p212 

    Pulsed thermography is gaining wide acceptance in the aerospace, automotive and power generation industries, owing to its quickness of inspection, repeatability and sensitivity. Recently, advancement in pulsed thermographic data processing has been made by Thermal Wave Imaging Inc (TWI) in USA....

  • Estimating confidence lower bounds for Weibull percentiles. B&idot;rg�ren, B. // Journal of Materials Science Letters;Aug2003, Vol. 22 Issue 16, p1121 

    The article presents a study related to Weibull distribution that has been widely used in recent years to model the statistical behavior of many materials such as advanced ceramics, metallic and ceramic matrix composites. In particular, it is in the ASTM standards for modeling fracture strength...

  • Review papers in Journal of Materials Science Volumes 39 and 40.  // Journal of Materials Science;Apr2005, Vol. 40 Issue 8, p2113 

    Lists research papers in the volumes 39 and 40 of the "Journal of Materials Science". "Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials," by A. Baldan; "Thermo-mechanical fatigue of shape memory alloys," by E. Hornbogen; "Role of entropy of fusion in...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics