TITLE

Nondestructive evaluation of a transversely isotropic cylinder encased in a solid elastic medium

AUTHOR(S)
Fan, Y.; Sinclair, A. N.; Honarvar, F.
PUB. DATE
May 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 509 Issue 1, p89
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A mathematical model is developed to describe the scattering of a plane wave incident at an arbitrary angle on a transversely isotropic cylinder imbedded in a solid elastic matrix. The model is based on the normal mode expansion method, and accommodates both compression and shear waves, polarized in any direction. The geometry is a good model for a composite material featuring a single reinforcing fiber encased in an elastic matrix. The sensitivity of the system to perturbations in the cylinder’s elastic constants in explored, as revealed by changes in the scattered wave spectrum. The results indicate several system resonances, each sensitive to perturbations in certain elastic constants of the cylinder. Also, dispersive pseudo-Stoneley waves that travel on the matrix-cylinder interface lead to resonances in the scattered wave spectrum that would be good indicators of deficiencies in the integrity of the interface. © 2000 American Institute of Physics.
ACCESSION #
6029030

 

Related Articles

  • NUMERICAL PREDICTION OF RESIDUAL STRESSES IN OPEN-ENDED THICK-WALLED CROSS-PLY FILAMENT WOUND FIBER-REINFORCED CYLINDERS. Turusov, R. A.; Memarianfard, H. // Proceedings of Moscow State University of Civil Engineering / Ve;2015, Issue 11, p80 

    In this paper a three-dimensional finite element analysis employed to predict thermal residual stresses field which arises during the cooling stage at the free edges of a thick walled filament wound cylinder with cross-ply lamination. The inner radius of composite is 50 mm and outer radius is 75...

  • Analysis of the Change in Relaxation Properties of Polypropylene Fibre in Deformation. Biryukov, A. V.; Artemenko, S. E.; Biryukov, V. P. // Fibre Chemistry;Sep/Oct2003, Vol. 35 Issue 5, p391 

    A method is proposed for analyzing the change in the relaxation parameters of polymers during deformation by the method of repeated drawing with holding at each step until relaxation occurs. It is shown that the stress relaxation curves for polypropylene fibre can be described by two Maxwellian...

  • Stress Distribution in an Elastic Body with a Periodically Curved Row of Fibers. Akbarov, S.D.; Kosker, R.; Ucan, Y. // Mechanics of Composite Materials;May2004, Vol. 40 Issue 3, p191 

    Within the framework of a piecewise homogeneous body model, with the use of exact three-dimensional equations of elasticity theory for anisotropic bodies, a method is developed for investigating the stress distribution in an infinite elastic matrix containing a periodically curved row of...

  • Cross-Property Connections for Fiber-Reinforced Composites with Transversely Isotropic Constituents. Sevostianov, Igor; Sabina, Federico J.; Bravo-Castillero, Julian; Guinovart-Diaz, Raul; Rodriguez-Ramos, Reinaldo // International Journal of Fracture;Nov2006, Vol. 142 Issue 3/4, p299 

    The paper addresses the problem of the connection between effective elastic and conductive properties of a fiber reinforced material with both phases (the matrix and the fibers) being transversely-isotropic. The exact solution for a square array of fibers and approximate solutions for randomly...

  • Equilibrium of elastic solids with thin elastic inclusions. Negri, M.; Khludnev, A. // Doklady Physics;Mar2012, Vol. 57 Issue 3, p140 

    The article discusses the simulation of linear boundary conditions for the equilibrium of elastic solids with thin elastic fibers. It notes that mutual penetration of crack edges must be excluded in boundary conditions for inequalities to define exfoliation. It mentions that an elastic solid...

  • Matrix fracture strength in bonded brittle composites. Yih-Cherng Chiang // Journal of Materials Science;Jan2006, Vol. 41 Issue 2, p573 

    The article discusses a study on matrix fracture strength in a bonded brittle composites. It indicates that crack-tip transverse tensile stress often leads to the problem of matrix cracking modeling for bonded fibers. As the matrix crack continuously propagating, the crack-tip transverse tensile...

  • Determination of the torsion angles of alanine and glycine residues of model compounds of spider silk (AGG)10 using solid-state NMR methods. Ashida, Jun; Ohgo, Kosuke; Komatsu, Kohei; Kubota, Ayumi; Asakura, Tetsuo // Journal of Biomolecular NMR;Feb2003, Vol. 25 Issue 2, p91 

    Spiders synthesize several kinds of silk fibers. In the primary structure of spider silk, one of the major ampullate (dragline, frame) silks, spidroin 1, and flagelliform silk (core fibers of adhesive spiral), there are common repeated X-Gly-Gly (X = Ala, Leu, Pro, Tyr, Glu, and Arg) sequences,...

  • Cylinders withstand extremes. Korane, Kenneth // Machine Design;11/6/2003, Vol. 75 Issue 21, p100 

    Reports on the installation of the RexMover rodless pneumatic cylinders designed by Bosch Rexroth Pneumatics in the production facility of USG Corp. in Walworth, Wisconsin. Product manufactured by the facility; Advantages of the RexMover; Features of the cylinders.

  • The Effect of Cylinder Speed of Carding Machine on Immature Fiber Content.  // China Textile Leader;Feb2014, Issue 2, p36 

    The article carried out a study of the relationship between cylinder speed of carding machine and immature fiber content. The study result shows that the speed of cylinder has evident effect on immature fiber content. First, the immature fiber content is gradually reducing in both carding and...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics