TITLE

Review on lateral stress measurements with piezoresistive gauges

AUTHOR(S)
Rosenberg, Z.
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p1033
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The use of piezoresistance stress gauges to measure longitudinal and lateral stresses behind the shock front has become very popular in the last two decades. While the longitudinal gauge calibrations were achieved with the help of other techniques, the lateral stress gauge results could not be compared with other tests, resulting in some controversies between different workers. In the present review we show that these controversies have actually a very small effect on the handling and calibration procedures for the lateral stress gauge. Some important applications are also reviewed and discussed.
ACCESSION #
5985640

 

Related Articles

  • Investigation of Shrinkage-induced Stresses in Stereolithography Photo-curable Resins. Dimitirs Karalekas; Despina Rapti; Emmanuel E Gdoutos; A Aggelopoulos // Experimental Mechanics;Dec2002, Vol. 42 Issue 4, p439 

    An experimental study has been undertaken to investigate the shrinkage characteristics of acrylic-based and epoxy-based stereolithography (SL) photopolymer resin systems after they have been laser cured and post-cured under ultraviolet (UV), and thermal exposure. The induced residual stresses...

  • Comparison of Non-linear Finite Element Stress Analysis with In Vitro Strain Gauge Measurements on a Morse Taper Implant. İplikçioğlu, Haldun; Akça, Kivanç; Çehreli, Murat C.; Şahin, Saime // International Journal of Oral & Maxillofacial Implants;Mar/Apr2003, Vol. 18 Issue 2, p258 

    Purpose: To understand the mechanical and biomechanical behavior of dental implants, validation of stress and strain measurements is required. The objective of this study was to compare a non-linear finite element stress analysis with in vitro strain gauge measurements on strains in an...

  • Measurement of strain in a shock loaded, high-density glass. Millett, J. C. F.; Bourne, N. K.; Rosenberg, Z. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p607 

    Longitudinal strain has been measured in DEDF (Type D, Extra Dense Flint), a high-density, lead-filled glass, over the stress range 2.0 GPa to 4.5 GPa (the supposed Hugoniot Elastic Limit -- HEL). Such glasses have been shown to fail in compression across a front which has been called the...

  • A novel method for determining dynamic fracture toughness. Anderson, C. E.; Popelar, C. H.; Nagy, A.; Walker, J. D. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p505 

    Drop weight or pendulum machines are frequently used to determine the dynamic fracture toughness of a material. Determination of the dynamic fracture toughness requires an analysis of the experiment, but unfortunately the boundary and loading conditions are not directly measurable in these tests...

  • Direct measurements of strain in shock-loaded glass specimens. Rosenberg, Z.; Bourne, N. K.; Millett, J. C. F. // Journal of Applied Physics;4/15/1996, Vol. 79 Issue 8, p3971 

    Presents a study that investigated the nature of the various waves propagating in shock-loaded glasses by measuring the one-dimensional strain behind such waves. Description of the specimens used in the experiment; Presentation of a Lagrangian x-t diagram for the strain gauge experiment;...

  • STRAIN GAUGES MEASUREMENTS AND FEM ANALYSIS OF ELEMENTS OF CHASSIS OF OPEN CAST MINING MACHINES. Maślak, Paweł; Smolnicki, Tadeusz; Pietrusiak, Damian // Tehnicki vjesnik / Technical Gazette;Jul/Aug2013, Vol. 20 Issue 4, p655 

    In the paper are shown selective elements of chassis of open cast mining machines: control steering track and caterpillar tracks of open cast mining machines. Loads on each element are defined in accordance with current standard requirements norms. After setting boundary conditions, stress...

  • Measurement of small strains in a noisy environment. Tillack, M. S.; Kazimi, M. S.; Lidsky, L. M. // Review of Scientific Instruments;Sep85, Vol. 56 Issue 9, p1706 

    A simple technique is demonstrated for measuring strains in an electromagnetically noisy environment using electrical strain gauges. For applications in which strains are produced electromagnetically in current-carrying structures, the noise signal can be much larger than the strain signal....

  • Underwater application of strain gauges. Haase, Karl-Heinz // Environmental Engineering;Dec2004, Vol. 17 Issue 4, p39 

    Presents a study which explored the underwater application of strain gauges. Measurements of mechanical loads using strain gauges; Technical challenge with the underwater strain gauge application; Information on the FINO project by the German government.

  • Structural health monitoring Carbon nano paint can detect strain.  // High Performance Composites;Sep2012, Vol. 20 Issue 5, p17 

    The article provides information on a study which found that carbon nanotube paint can help detect structural strain in buildings conducted by scientists at Rice University in Houston, Texas. the study details a method on how strain paint can show signs of deformation before the effects become...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics