TITLE

Shock response of Ti-6Al-4V

AUTHOR(S)
Dandekar, Dattatraya P.; Spletzer, Stephen V.
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p427
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The shock behavior of a new Ti-6Al-4V alloy has been characterized up to stress levels of 13 GPa. Examination of velocity profiles obtained from five transmission experiments indicate elastic-plastic behavior in the material. Magnitude of the HEL lies between 2 - 3 GPa and appears to be dependent on material thickness. Spall strength tends to vary with changes in pulse width, ranging from 3.3 - 4.2 GPa.
ACCESSION #
5985496

 

Related Articles

  • Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6Fe). Fanning, J. C. // Journal of Materials Engineering & Performance;Dec2005, Vol. 14 Issue 6, p788 

    TIMETAL 555 is a high-strength near-β titanium alloy that was designed for improved producibility and excellent mechanical property combinations, including deep hardenability. The nominal chemical composition of TIMETAL 555 is Ti-5wt.%Al-5wt.%Mo-5wt.%V-3wt.%Cr. This article provides a summary...

  • Microstructure control and mechanical property correlation in Titanium alloy Ti-6Al-4V fasteners for space applications. Murty, S. V. S. Narayana; Manwatkar, Sushant; Narayanan, P. Ramesh // Materials Science Forum;2015, Vol. 830-831, p354 

    High strength fasteners of Titanium alloy Ti-6Al-4V are widely used in both launch vehicle and satellite structures. Ti-6Al-4V fasteners having three different types of microstructures were analysed for mechanical properties to understand the role of two phase α+β or transformed β phase...

  • RAPIDLY SOLIDIFIED ALUMINUM AND TITANIUM ALLOYS. DOBRESCU, Mircea; VASILESCU, Marius // Metalurgia International;2013 Special Issue Nr.6, Vol. 18, p136 

    Rapidly solidified aluminum alloys are obtained by a rapid solidification process called "melt spinning ". which generates aluminum alloys with superior properties in comparison with conventional aluminum alloy, together with fine-grained microstructure and more flexibility in alloying. Titanium...

  • Effect of the microstructure of titanium alloys on the fatigue strength characteristics. Herasymchuk, O.; Nalimov, Yu.; Markovs'kyi, P.; Terukov, A.; Bondarchuk, V. // Strength of Materials;May2011, Vol. 43 Issue 3, p282 

    The fatigue test results and the mechanical characteristics in static tension are obtained for specimens of titanium alloys belonging to the known classes of materials with a reference globular or bimodal microstructure and the so-called fine-grained β-transformed microstructure provided by...

  • Fabrication and Mechanical Characterization of Ti-Based Metallic Glass Matrix Composites by the Bridgman Solidification. Wang, Y.; Hao, G.; Zhang, Y.; Lin, J.; Qiao, J. // Metallurgical & Materials Transactions. Part A;May2014, Vol. 45 Issue 5, p2357 

    In situ Ti-based metallic glass matrix composites are fabricated by the Bridgman solidification, and the mechanical properties are investigated. The fine dendrites about 2 to 10 μm are uniformly distributed in the glass matrix. The compressive results show that the composites have high...

  • Mechanical properties of multicomponent titanium alloy. Firstov, S.; Gorban', V.; Krapivka, N.; Pechkovskii, É.; Danilenko, N.; Karpets, M. // Strength of Materials;Sep2010, Vol. 42 Issue 5, p622 

    β-titanium alloy, obtained by cooling a melt at a rate of ∼ 800°C/s, has been studied by the methods of scanning and transmission electron microscopy, short-duration and long-duration macroindentation, as well as uniaxial compression in a temperature range of 20-1000°C. The alloy...

  • Phase Effect on Deformation Anisotropy of Strength and Fracture Resistance Characteristics of Titanium Alloys. Nizhnik, S.; Dmitrieva, E. // Strength of Materials;Nov2014, Vol. 46 Issue 6, p785 

    Comparative analysis of anisotropy of mechanical characteristics of titanium and aluminum alloys as well as austenitic steel in the formation of structural and crystallographic texture on rolling and in biaxial tension was carried out. The effect of increasing the β-phase content in titanium...

  • Influence of Upsetting and Drawing Times on the Microstructure and Microtexture of TC4 Titanium Alloy. Mengqi Yan; Kai Li; Yuhui Wang; Wangfeng Zhang // Materials Science Forum;2016, Vol. 849, p317 

    TC4 titanium alloys have been extensively used in the aerospace engineering due to the high specific strength, high temperature resistance and good corrosion resistance. However, unsuitable forging methods will cause unqualified mechanical properties in the height direction of forgings. The...

  • Study of the effect of thinning during forming on the strength of elliptical dishes of titanium VT1-0. Kutepov, S.; Sadovskaya, E.; Kurilina, Yu. // Chemical & Petroleum Engineering;Jul2010, Vol. 46 Issue 7/8, p485 

    Results are given for testing the strength of formed elliptical dishes of titanium grade VT1-0 with thinning to 44% in the transition area. It is concluded from tests that thinning to 20% in the transition area does not affect the dish strength as a whole.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics