TITLE

Material failure and pattern growth in shock-driven aluminum cylinders at the Pegasus facility

AUTHOR(S)
Stokes, John; Fulton, R. D.; Morgan, D. V.; Obst, A. W.; Oro, D. M.; Oona, H.; Anderson, W.; Chandler, E. A.; Egan, P.
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p493
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Experiments on the Pegasus pulsed power facility have investigated material failure and the growth of sinusoidal perturbations machined on the free inner surface of both A1 1100 and A1 6061-T6 samples undergoing shocked acceleration. The material behind the free surface exhibits massive microspall resulting in a volume of low-density material. Rapid pattern growth in the failed material and subsequent pattern growth on the surface, including jetting in some cases, were seen. Shock pressures were 15 GPa and 50 GPa.
ACCESSION #
5985478

 

Related Articles

  • Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloy. Huijie Liu; Fujii, H.; Maeda, M.; Nogi, K. // Journal of Materials Science Letters;Aug2003, Vol. 22 Issue 15, p1061 

    Discusses the tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloy. Chemical composition and mechanical properties of 6061-T6 aluminum alloy; Suggestion that the tensile properties of the joint seriously deteriorate, and the fracture location of the...

  • Enhancement of Mechanical Properties of AA 5083 Welded Joint by Pulsed Current Tungsten Inert Gas Welding. Subbaiah, K.; Manivasagam, Geetha; Sridhar, N.; Rao, S. R. K. // International Journal of Applied Engineering Research;2010, Vol. 5 Issue 15, p2677 

    AA5083-H321 aluminium alloy plates were welded using Continuous Current Tungsten Inert Gas and Pulsed Current Tungsten Inert Gas welding techniques. In this study the Bead-on-Plate technique was employed, to weld the samples autogenously. The joints were made at two different pulse frequencies...

  • Multiscale modeling of intergranular fracture in aluminum: constitutive relation for interface debonding. Yamakov, V.; Saether, E.; Glaessgen, E. // Journal of Materials Science;Dec2008, Vol. 43 Issue 23/24, p7488 

    Intergranular fracture is a dominant mode of failure in ultrafine grained materials. In the present study, the atomistic mechanisms of grain-boundary debonding during intergranular fracture in aluminum are modeled using a coupled molecular dynamics—finite element simulation. Using a...

  • Fracture behavior of notched specimens of TiAl alloys. Chen, J. H.; Cao, R.; Zhang, J.; Wang, G. Z. // Journal of Materials Science;Apr2007, Vol. 42 Issue 8, p2820 

    Fracture behavior of a two-phase TiAl alloy was investigated using notched specimens. Fracture surfaces and metallographic sections of surviving notch in double notched specimens are observed. The fracture process of notched specimens of TiAl alloys was described as that several inter-lamellar...

  • Investigation into the Mechanical Properties and Fracture Behavior of A356 Aluminum Alloy-Based ZrO2-Particle-Reinforced Metal-Matrix Composites. Abdizadeh, H.; Baghchesara, M. A. // Mechanics of Composite Materials;Nov2013, Vol. 49 Issue 5, p571 

    In the present study, an investigation has been carried out into the influence of ZrO 2 content and casting temperature on the mechanical properties and fracture behavior of A356 Al/ZrO 2 composites. A356 aluminum alloy matrix composites reinforced with 5, 10 and 15 vol.% ZrO 2 were...

  • Non-Local Modeling and Simulation of Wave Propagation and Crack Growth. Martowicz, Adam; Ruzzene, Massimo; Staszewski, Wieslaw J.; Uhl, Tadeusz // AIP Conference Proceedings;2014, Vol. 1581, p513 

    The paper presents the results of numerical analyses carried out for 2D models of aluminum plates undergoing crack propagation. Different types of numerical analyses were performed to show the area of applicability of a non-local discrete formulation of mechanical continua for NDE and QNDE. The...

  • Failure mechanisms in single-point incremental forming of metals. Silva, Maria; Nielsen, Peter; Bay, Niels; Martins, P. // International Journal of Advanced Manufacturing Technology;Oct2011, Vol. 56 Issue 9-12, p893 

    The last years saw the development of two different views on how failure develops in single-point incremental forming (SPIF). Today, researchers are split between those claiming that fracture is always preceded by necking and those considering that fracture occurs with suppression of necking....

  • Deformation behavior and mechanisms of a nanocrystalline multi-phase aluminum alloy. Shaw, Leon L.; Luo, Hong // Journal of Materials Science;Mar2007, Vol. 42 Issue 5, p1415 

    A nanocrystalline (nc) Al–Fe–Cr–Ti alloy containing 30 vol.% nc intermetallic particles has been used to investigate deformation behavior and mechanisms of nc multi-phase alloys. High compressive strengths at room and elevated temperatures have been demonstrated. However,...

  • Universal Properties of Metals in the Phenomenon of Dynamic Failure. Il�kaev, R. I.; Uchaev, A. Ya.; Novikov, S. A.; Zavada, N. I.; Platonova, L. A.; Sel�chenkova, N. I. // Doklady Physics;May2002, Vol. 47 Issue 5, p341 

    Analyzes the universal properties of metals in the phenomena of dynamic failure. Response of metal to an external physicomechanical action; Time regularities of dynamic failure for a number of metals; Size distribution of failure centers; Structure of crystal lattice slip bands in the vicinity...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics