Shear strength of aluminum at shockless compression

Bat’kov, Yu. V.; Knyazev, V. N.; Novikov, S. A.; Raevski, V. A.; Fishman, N. D.
April 2000
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p501
Academic Journal
Tests are carried out with the purpose to determine dynamic yield strength of AD-l-type aluminum under shockless loading by the method of main stresses. The obtained results testify to increase of the yield strength under shockless loading in comparison to shock loading.


Related Articles

  • Shock compressed solids on the nova laser. Kalantar, D. H.; Remington, B. A.; Colvin, J. D.; Gold, D. M.; Mikaelian, K. O.; Weber, S. V.; Wiley, L. G. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p1193 

    Experiments are being developed to shock compress metal foils in the solid state to study the material strength under high compression. The x-ray drive has been characterized and hydrodynamics experiments performed to study growth of the Rayleigh-Taylor (RT) instability in Al foils at a peak...

  • Compressive Strength of Shocked Aluminum for Stresses of 4–22 Gpa. Huang, H.; Asay, J. R. // AIP Conference Proceedings;2006, Vol. 845 Issue 1, p737 

    Measurements of the compressive strength are presented for several aluminum alloys shocked to 22 GPa. Five well characterized alloys were studied, including 6061 with grain sizes of 50, 30 and <5 μm, and both pure and ultra pure Al with grain sizes of ∼ 200 and 300 μm, respectively....

  • Shock Equation of State and Dynamic Strength of Tungsten Carbide. Dandekar, Dattatraya P.; Grady, Dennis E. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p783 

    Abstract Tungsten carbide ceramic is a high-density material with attractive compressive and tensile strength properties. Cercom, Inc. manufactured hot-pressed tungsten carbide ceramic was tested in the present study. The density of this ceramic varies between 15.53 and 15.56 Mg/m[sub 3]. The...

  • The Hugoniot Elastic Limit of ALON. Cazamias, James U.; Fiske, Peter S.; Bless, Stephan J. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p767 

    We performed plate impact experiments on the transparent polycrystalline ceramic aluminum oxynitride (A1ON, transparent alumina). From VISAR measurements, the Hugoniot Elastic Limit, (σ[sub HEL], is 1 1.0-1 1.4 GPa with a corresponding yield strength of 7.2-7.5 GPa. A transverse gauge gives a...

  • Computer Simulation of the Propagation of Short Shock Pulses in Ceramic Materials. Skripnyak, Vladimir A.; Skripnyak, Evgeniya G.; Zhukova, Tat’yana V. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p751 

    The propagation of shock pulses of submicrosecond duration in Al[sub 2]O[sub 3], ZrO[sub 2], and SiC ceramics is investigated by the numerical simulation method. Contributions of various mechanisms of structure evolution to stress relaxation in brittle ceramics are discussed. A theoretical...

  • The Dynamic Strength of Cement Paste under Shock Compression. Tsembelis, K.; Proud, W. G.; Field, J. E. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p1414 

    A series of plate impact experiments on cement paste (grout) has been performed to assess the dynamic strength of this material. Lateral stresses have been directly measured by means of embedded manganin stress gauges. In combination with longitudinal stresses, measured previously [1], these...

  • STUDY OF THE PROJECTILE IMPACT ON ALUMINUM TARGETS DIVIDED BY WATER. Saburi, T.; Kubota, S.; Ogata, Y.; Wada, Y.; Itou, A.; Nakanishi, T. // AIP Conference Proceedings;12/12/2007, Vol. 955 Issue 1, p589 

    The impact behavior of a projectile into aluminum alloy targets divided by water was experimentally observed using high-speed video camera, and a numerical simulation was conducted using LS-DYNA. The target is made of aluminum alloy and the size was 5 mm in thick, 200 mm in height and width. Two...

  • Aluminum air cylinders find their place in sawmill application.  // Hydraulics & Pneumatics;Mar2008, Vol. 61 Issue 3, p36 

    The article reports that sawmill equipment manufacturer USNR has chosen Bosch Rexroth ISO/VDMA 523 aluminum cylinders and used the cylinder's ideal cushioning concepts for the speed and durability requirements of USNR's Accu-Trim Trimmer high speed trim saws. Tommy Green, USNR's chief engineer...

  • Spall properties of Solenhofen limestone and Dresser basalt. Grady, Dennis E. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p1255 

    Planar impact methods and velocity interferometry diagnostics have been used to measure the spall strength of Solenhofen limestone and Dresser basalt following shock precompression to stresses over the range of approximately 100 to 700 MPa but below the Hugoniot elastic limit of both rock...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics