TITLE

Lateral sample motion in the plate-rod impact experiments

AUTHOR(S)
Zaretsky, Eugene; Levi-Hevroni, David; Ofer, Dror; Shvarts, Dov
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p593
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Velocity of the lateral motion of cylindrical, 9 mm diameter 20 mm length, samples impacted by WHA impactors of 5-mm thickness was monitored by VISAR at the different points of the sample surface at distance of 1 to 4 mm from the sample impacted edge. The impactors were accelerated in the 25-mm pneumatic gun up to velocities of about 300 m/sec. Integrating the VISAR data recorded at the different surface points after the impact with the same velocity allows to obtain the changes of the sample shape during the initial period of the sample deformation. It was found that the character of the lateral motion is different for samples made of WHA and commercial Titanium alloy Ti-6A1-4V. 2-D numerical simulation of the impact allows to conclude that the work hardening of the alloys is responsible for this difference.
ACCESSION #
5985451

 

Related Articles

  • ELECTRON BACKSCATTER DIFFRACTION OF A PRE AND POSTDEFORMATION Ti-6Al-4V TAYLOR IMPACT SPECIMEN. Wielewski, E.; Eggleston, J.; Siviour, C. R.; Petrinic, N. // AIP Conference Proceedings;2012, Vol. 1426 Issue 1, p1395 

    Titanium alloys have seen wide spread, and ever increasing, use in the aerospace industry, due to a high specific strength and good resistance to corrosion. However, current understanding of the deformation mechanisms of Titanium alloys under complex high strain rate loading is limited. In order...

  • Textural deceleration of recrystallization in titanium alloy TS6. Demakov, S.; Vodolazskii, F.; Vodolazskii, V.; Popov, A. // Metal Science & Heat Treatment;Jan2011, Vol. 52 Issue 9/10, p487 

    Factors responsible for the appearance of textural deceleration of recrystallization in hot-rolled sheets from pseudo-β-titanium alloy TS6 are systematized. Split deformation promotes removal of grains appearing in the structure due to the action of textural deceleration of recrystallization....

  • Human Soft Tissue Collision Detection Algorithm of Virtual Surgery and GPU Parallel Acceleration. Fangfei Lv; Fei Chen; Fan Yang; Yalong Dong; Guanglei Wang; Bin Dong; Xiuling Liu // Advances in Information Sciences & Service Sciences;Jun2014, Vol. 6 Issue 3, p11 

    With the development of virtual surgery simulation application, we introduced a method for fast collision detection between triangles and improved the algorithm of collision detecting. This method improved the bounding box updating rate after soft tissue deformation, and used the GPU parallel...

  • Oblique Impact Analysis of a Golf Ball. Arakawa, Kazuo // Applied Mechanics & Materials;2014, Issue 566, p443 

    The oblique impact of a golf ball with a rigid steel target was studied using a high-speed video camera. The video images during the impact were employed to measure the compres sional displacement of the ball normal to the target and to determine the normal velocity and acceleration of the ball...

  • Generalized Deformation and Total Velocity Change Analysis with Missing Vehicle Stiffness Coefficients; G-DaTA ΔVâ„¢. Ogden, Jerry S. // Journal of the National Academy of Forensic Engineers;Jun2015, Vol. 32 Issue 1, p15 

    Analysis of vehicle deformation from impacts largely relies upon A and B stiffness coefficients for vehicle structures in order to approximate the velocity change and accelerations produced by an impact. While frontal impact stiffness factors for passenger vehicles, light trucks, vans, and sport...

  • Shock pulse shaping in a small-form factor velocity amplifier. Kelly, Gerard; Punch, Jeff; Goyal, Suresh; Sheehy, Michael // Shock & Vibration;2010, Vol. 17 Issue 6, p787 

    This theme of this paper is the design and characterisation of a velocity amplifier (VAMP) machine for high-acceleration shock testing of micro-scale devices. The VAMP applies multiple sequential impacts to amplify velocity through a system of three progressively smaller masses constrained to...

  • Simplified Formulation of Impulse Dynamics: Application to a Moped Crash Test. Houidi, A.; Maiffredy, L.; Romdhane, L.; Dogui, A.; Fayet, M. // International Review of Mechanical Engineering;Nov2008, Vol. 2 Issue 6, p915 

    The objective of this work is to present a new simplified formulation of the impulse dynamics. This formulation will be used to simulate the dynamic behaviour of a system entering into collision and presenting several unilateral contacts. These unilateral contacts can be lost during the...

  • Dynamic Deformation Behavior of a Golf Ball during Normal Impact. Arakawa, K.; Mada, T.; Komatsu, H.; Shimizu, T.; Satou, M.; Takehara, K.; Etoh, G. // Experimental Mechanics;Aug2009, Vol. 49 Issue 4, p471 

    The normal impact between a golf ball and a rigid steel target was studied to examine ball deformation and the contact force during the impact. Using high-speed video images, the normal and tangential compression ratios of the ball were measured to analyze the ball deformation quantitatively. In...

  • Three-dimensional displacement measurements ahead of a projectile. Goldrein, H. T.; Synnergren, P.; Proud, W. G. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p1095 

    A new method has been developed for determining all three components of displacement at every point on a plane within a specimen deforming in an impact. By repeating the experiment, both the location of the plane and the time of the measurement can be varied, thus making it possible to visualise...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics