TITLE

Shock induced reaction to refractory metal disilicides from MA precursor

AUTHOR(S)
Aizawa, Tatsuhiko; Ichige, Ken-Ichi; Syono, Yasuhiko
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p759
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Full shock reactivity into refractory metal disilicides can be attained when starting from the pretreated elemental powder compact or the mechanical alloying precursors. This shock induced reactivity is strongly dependent on the premixing state in the precursor. Mo-2Si is employed to describe the common shock reaction behavior to refractory metal - silicon system. In particular, a role of intermediate phase in the shock induced reaction is discussed on the basis of precise TEM observation.
ACCESSION #
5985408

 

Related Articles

  • Localized epitaxial growth of CrGe on (111) and (001) germanium. Hsieh, Y. F.; Chen, L. J. // Journal of Applied Physics;9/1/1988, Vol. 64 Issue 5, p2821 

    Presents a study that grew epitaxial chromium germanide (CrGe) locally on both (111) and (001) germanium (Ge) by a solid-phase epitaxy scheme. Aspects in which refractory metal silicides have been used; Determination of the orientation relationships between epitaxial CrGe and Ge substrates;...

  • Synthesis of nanocomposites and amorphous alloys by mechanical alloying. Suryanarayana, C.; Klassen, T.; Ivanov, E. // Journal of Materials Science;Oct2011, Vol. 46 Issue 19, p6301 

    Mechanical alloying (MA) is a powder metallurgy processing technique that involves repeated cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. Due to the specific advantages offered by this technique, MA was used to synthesize a variety of advanced materials....

  • An online optical system for inspecting tool condition in milling of H13 tool steel and IN 718 alloy. Li, W.; Singh, H.; Guo, Y. // International Journal of Advanced Manufacturing Technology;Jul2013, Vol. 67 Issue 5-8, p1067 

    Tool wear adversely affects surface integrity due to higher cutting forces and temperatures. However, an accurate and efficient tool wear measurement is a challenging problem. The traditional direct tool wear measurement methods such as optical microscope and scanning electron microscope (SEM)...

  • Obtainment of a NiCrNbC Alloy by Mechanical Alloying. da Silva, Alisson K.; Cintho, Osvaldo M.; Capocchi, José D. T. // Materials Science Forum;2014, Vol. 802, p35 

    The present work investigate the possibility of obtainment by mechanical alloying of Ni superalloys based on the Ni-Cr-Nb-C system strengthened by γ"(Ni3Nb), since γ"(Ni3Nb) as γ' (Ni3Al) are typical coherent phase strengthening mechanisms in nickel superalloys. In order to evaluate...

  • Study on Microstructure and Phase Composition of Co-8.8Al-9.8W Superalloy with Alloying Element Tantalum. Yang-tao Xu; Qi-zhen Sha; Wan-li Zhao // Advanced Materials Research;2014, Vol. 1083, p37 

    In order to study the effect of tantalum to the microstructure and phase composition of Co-8.8Al-9.8W-XTa(X=0,2,at%) superalloy. The Co-8.8Al-9.8W-XTa(X=0,2) supperalloy used pure element powder, according to the ratio of different atomic percentage composition to make ingredients. It is mixed...

  • Effect of the method of heat treatment on formation of structure and properties of refractory titanium alloys. Popov, A.; Narygina, I.; Popova, M. // Metal Science & Heat Treatment;Mar2013, Vol. 54 Issue 11/12, p633 

    Special features of formation of structure and properties in pseudo-α-titanium alloys are considered as a function of the time of treatment in the β-range.

  • Ab Initio Calculated Thermodynamic Properties of MoSiB Phase and NbSiB Phase. Kim, Sungtae; Park, J. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Nov2013, Vol. 65 Issue 11, p1482 

    Due to their attractive high-temperature properties, multiphase Mo-Si-B alloys in the Mo-rich Mo-Si-B ternary system have been identified for high-temperature applications. The ternary intermetallic T (MoSiB) phase is a central feature of the phase equilibria within this ternary system....

  • Influence of Powder Metallurgical Processing Routes on Phase Formations in a Multicomponent NbSi-Alloy. Seemüller, C.; Hartwig, T.; Mulser, M.; Adkins, N.; Wickins, M.; Heilmaier, M. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Sep2014, Vol. 66 Issue 9, p1900 

    Refractory metal silicide composites on the basis of Nb-NbSi have been investigated as potential alternatives for nickel-base superalloys for years because of their low densities and good high-temperature strengths. NbSi-based composites are typically produced by arc-melting or casting. Samples...

  • Phase fields of nickel silicides obtained by mechanical alloying in the nanocrystalline state. Datta, M. K.; Pabi, S. K. // Journal of Applied Physics;6/15/2000, Vol. 87 Issue 12, p8393 

    Presents information on a study which examined solid state reactions induced by mechanical alloying of elemental blends of nickel and silicon over the entire composition range of the nickel silicide system. Experimental procedures; Results and discussion.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics