TITLE

Equation of state for liquid metals

AUTHOR(S)
Levashov, Pavel R.; Fortov, Vladimir E.; Khishchenko, Konstantin V.; Lomonosov, Igor’ V.
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p89
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Equations of state for metals based on the soft-sphere model are presented. Parameters of the soft-sphere potential are found. Binodals with critical points, isobars, shock adiabats, and release isentropes are calculated. Comparison of the results with available experimental data is made. Monte-Carlo simulation at constant pressure is carried out with obtained parameters. The results are in a good agreement with semiempirical isobar calculations.
ACCESSION #
5985370

 

Related Articles

  • Accurate viscosity modeling of liquid metals based on friction theory and PC-SAFT equation of state. Mousazadeh, M. // Journal of the Iranian Chemical Society;Jun2012, Vol. 9 Issue 3, p367 

    Values of the viscosities of liquid metals are important in the prediction of fluid flow in many metallurgical manufacturing processes. In this work the friction theory ( f- theory) for viscosity modeling is used in conjunction with PC-SAFT equation of state for describing the viscosity behavior...

  • Note: Measurement method for sound velocity of melts in large volume press and its application to liquid sodium up to 2.0 GPa. Song, Wei; Liu, Yonggang; Wang, Zhigang; Gong, Chaoying; Guo, Jie; Zhou, Wenge; Xie, Hongsen // Review of Scientific Instruments;Aug2011, Vol. 82 Issue 8, p086108 

    Based on large volume press and conventional pulse-echo ultrasonic technique, we have overcome the difficulty in determining the length of liquid specimen under high pressure, and the sound velocity in liquid Na has been measured up to 2 GPa. The P-V data deduced by our sound velocity results...

  • A RELATIVELY SIMPLE ANALYTICAL EQUATION OF STATE FOR LIQUID METALS. Maw, J. R. // AIP Conference Proceedings;2012, Vol. 1426 Issue 1, p779 

    Over the past 50 years considerable research has been carried out in attempts to model the behaviour of liquid metals. Many methods have been proposed for estimating the critical point properties and a number of equations of state (EOS) have been developed, usually in tabular form, to describe...

  • Prediction of density of molten metals using equation of state. YOUSEFI, FAKHRI; KAVEH, MEYSAM // High Temperatures -- High Pressures;2012, Vol. 41 Issue 6, p395 

    The present work evaluates the performance of a statistical-mechanical equation of state in predicting density of molten metals. The temperature dependent parameters of the equation of state have been calculated using corresponding states correlation based on the normal boiling point parameters...

  • Electromagnets flow of molten metal.  // Professional Engineering;02/25/98, Vol. 11 Issue 4, p46 

    Presents information on a method used to control the flow of molten metal during continuous casting uses electromagnetic forces. Identification of what the principle of this method is based; Reference to conventional hydraulic slide gates; Information on electromagnetic flow control.

  • Ionization mechanism in a liquid-metal ion source. Source for high-melting metals. Sikharulidze, G. G. // Technical Physics;Nov97, Vol. 42 Issue 11, p1317 

    Investigations have been made of the ionization mechanism in a liquid-metal ion source. At the instant of ion current generation the surface of a liquid metal emitter frozen in a highvoltage field exhibits microprotrusions pulled from the liquid metal by the electric field. A doublefocusing mass...

  • Multiple-tip liquid-metal field emitter. Korovin, O. P.; Popov, E. O.; Shrednik, V. N.; Karatetskii, S. S. // Technical Physics Letters;Apr99, Vol. 25 Issue 4, p310 

    A stable field emitter with a large tip density (up to 10[sup 8] cm[sup -2]) has been created using track membrane technology. The emitter has been tested in various current collection regimes from a constant current to short pulses of nanosecond duration with a repetition frequency of several...

  • Erosion from Liquid-Metal Plasma-Facing Components in Future Fusion Devices. Allain, Jean P. // AIP Conference Proceedings;2002, Vol. 635 Issue 1, p273 

    The use of liquid metals as candidate plasma-facing component (PFC) materials can enhance the performance and heat flux limits of fusion devices. Their applicability however, is strongly dependent on erosion properties including sputtering and evaporation. In this paper, the viability of...

  • Design of solid/liquid-liquid/solid trilayer systems for the measurement of diffusion coefficients in liquid metals Zhao, J.H.; Zhao, J. H.; Liu, R.P.; Liu, R. P.; Zhang, M.; Zhou, Z. H.; Zhang, X. Y.; Cao, L. M.; Dai, D. Y.; Xu, Y. F.; Wang, W. K. // Review of Scientific Instruments;Aug1998, Vol. 69 Issue 8, p3002 

    Presents a method in investigating diffusion processes in liquid metals with solid/liquid-liquid/solid trilayer systems. Benefits of trilayer system designs; Interdiffusion of liquid zinc and tin at 500 degrees Celsius; Interdiffusion coefficient range of tantalum/zinc-tin/silicon trilayers.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics